I have a Macbook Pro . The hard disk failed smart disk and my laptop does not start any more. Is it ok if I replace the HDD with CGET or WD hard disk rather than the apple hard disk. the pros and cons of a non apple HDD.
Info:
MacBook Pro, OS X Mavericks (10.9.3)
My hard and back up disk both failed on the same day, strange but the kids were on the computer and things happen.Running Mac OS 10.6 I paid $800 to "super geeks" to recover the pics > 30,000 (many duplicates)I will receive a 500 gig external drive from them today via Fed Ex with the pics recovered .My plan is to move them to my iMac (had a new HD put in) but I do not want to transfer 30,000 pics priorto running duplicate annihilator & thumbnail annihilator on the new external drive.Is there an easy way to do this > looking for help?Can I run the programs on the recovered drive I will receive today prior to my transferring?Or is there a more efficient way of doing this.
Info:Mac Pro, Mac OS X (10.6.6)
SMART status in my imac hard disk running Snow Leopard is failing. it is < 2 years old. No obvious issues with the machine.
View 1 Replies View RelatedSo so annoyed right now. Today my 12" G4 powerbook started to become slow, lots of spinning wheel, delayed menus etc. I checked file permissions, rebooted and it just kept on getting slower. Eventually it wouldn't get past the white apple screen.
I booted off the Tiger DVD and ran disk utility to fix and repair permissions again. It wouldn't let me repair the disk as I kept getting this error:
'Repair volume failed with error could not unmount disk'
I had to reboot again, and eventually my hard disk no longer appears in Disk Utility. I tried to boot into safe mode and get this:
'"I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus
I0ATAController device blocking bus"
So now I pretty much can't do anything with it. Failed Hard Drive?
What can be done if Time Machine failed to save certain data to external hard disk, but I do have the old hard drive? I have a new IMac 10.9.2. The old IMac was hit by lightning/surge. Restored data from external LaCie disk but some information is missing. Apparently Time Machine did not save it to the external disk, or we just can't locate it. We do haves the old hard disk and will put it in a box to be able to access it.
Is partitioning the answer?
I have been trying to download the new Yosemite update and kept getting an error message regarding the download. When I finally figured out what was going on, it appears that I don't have very much room on my hard drive to allow Yosemite to download. As you can see, the large problem is found in the movies and other categories.This brings me to my question.
1.) How can I clear up the 'other' clutter effectively, despite not knowing what falls into the 'other' category?
2.) Without having an external hard drive, is there a way to transfer movie purchases from iTunes to either USB drives or something simple to free up some more space? I don't want to outright delete anything, as I'm afraid that I'd lose the purchase, and therefore, the money spent. However, I'm not opposed to getting an inexpensive external hard drive.
I don't have a CD drive--just 2 USB ports and 1 for a memory card, so hopefully that won't inhibit storage options.
Info:
MacBook Air, OS X Mavericks (10.9.5)
How can can i start my MBP without losing files (pictures etc)
Info:
MacBook Pro
I've download a Seagate Diagnostics programme to check whether my external Seagate FreeAgent Desk is working properly or not. However, when I run the programme, it indicates that cannot find the disk.
View -1 Replies View RelatedI have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
A while back I removed a Apple Hard Drive after I thought I had shut down the computer. Instead, it had just slept and so still had the power on. This caused the file system in the hard drive to fail, so I erased and rebuilt the file system on the Hard Drive. It worked fine for another day, and then failed. When I went to see if I could fix it, Disk Utility said the S.M.A.R.T status had failed and the send the hard drive to an apple specialist. Is there any way I could fix the Hard Drive myself?
View 1 Replies View RelatedI am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.
Info:
MacBook Pro, OS X Mavericks (10.9)
I'm having a pretty serious problem. I attempted to erase the free space on my HD, as I do from time to time, except this time it appeared to hang/freeze at the end, when it gets to the part where it creates a temporary file. I waited for several minutes and it didn't move. I tried clicking the skip button, but that did nothing either, so I force quit Disk Utility.
The problem is, it left the disk at "Zero KB" of free space, effectively making my computer inoperable. I was in the process of studying for a huge exam tomorrow, and am currently flipping out.
If it matters, I'm on a Macbook Pro 2.33 GHz Core 2 Duo, running 10.4.
I really don't want to have to reinstall the OS and import the old files, but my real fear is that I will have to do a fresh install of the OS.
I'm having a pretty serious problem. I attempted to erase the free space on my HD, as I do from time to time, except this time it appeared to hang/freeze at the end, when it gets to the part where it creates a temporary file. I waited for several minutes and it didn't move. I tried clicking the skip button, but that did nothing either, so I force quit Disk Utility.
The problem is, it left the disk at "Zero KB" of free space, effectively making my computer inoperable. I was in the process of studying for a huge exam tomorrow, and am currently flipping out. Any help would be greatly appreciated.
If it matters, I'm on a Macbook Pro 2.33 GHz Core 2 Duo, running 10.4.
I really don't want to have to reinstall the OS and import the old files, but my real fear is that I will have to do a fresh install of the OS.
Next year when snow leopard will be released I was thinking to upgrade my poor 60gb hard disk to something more probably to a 320 one, but I got one problem I lost my recovery disk and actually I don't really need it as you know Tiger is very stable.
When my old macbook will have inside the new hard disk do I need to reinstall tiger then upgrade it to snow leopard or I can directly install snow leopard?
with my G5 I need to get a new hard drive since the old one died. to format the new hard drive do I need a start up disk or a recovery disk.
Information:
PowerMac G5
Mac OS X (10.4.10)
Dual Core 2.0 2x 256 Ram
Is there any way I can boot up my external hard drive as a start up disk along with my internal hard drive?
View 3 Replies View RelatedI am considering purchasing diskwarrior but want to make sure it can help my situation before I purchase it. My imac will not boot from the internal hard drive (Intel processor) When I use disk utility to try and repair the disk, I get error messages and it won't repair. I can see the HD but cannot repair it. When I connect using target mode with my mac book pro, the hard drive does not appear on my host (macbook pro) computer. I have reloaded OS X (Leopard) onto a firewire external drive and can boot my imac that way but I can not find my original internal Macintosh HD. Will disk warrior be able to help with this scenario. I would really like to access that internal Macintosh HD and retrieve my files.
View 3 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
Recently I purchased an external hard disk, to put all of my pictures of my baby due to space limitations on my internal laptop drive. Since my Canon camera 10 megapixel pictures take up a ton of space this was occurring at an alarming rate. My intention was also to back up to DVD but never got to it. This is both a comment and a question.
Now said baby, is getting really good at pulling cords etc. He managed to do this on the external drive firewire cable. As far as i know the drive was not in the process of actually writing. However, after a few minutes and trying to re-plug the drive the OS crashed with a Grey Screen of Death hardware error that tells you that you need to push the power button..
This apparently corrupted the drive's directory. Upon reboot the drive would not mount. Since there were time machine backups on the drive too Diskwarrior was not able to reconstruct the drive in the built in memory available on the computer. Time machine stores millions of files and Diskwarrior apparently wants to keep it all in memory at once. Since my computer has 2GB you would hope that would be enough but apparently not. So that failed. Other utilities seemed to be able to find the files but not restore the directory. I also took it to the apple store they were not able to recover it.
I have to say this is extremely distressing, and hard to believe that a simple accident like this could cost the loss of thousands of pictures. I did send it to a rescue company but that was expensive but I think apple needs to do something about this situation.
On Windows there is a way to disable the write cache for external drives. This is not available for Mac OS X. This would prevent this rather common occurrence of a plug accidentally becoming disengaged when the drive is not in the process of writing. This reduces the odds but I still think apple, in order to become clearly superior, needs a better solution.
I know Apple has experimented with ZFS would this not eliminate this possibility of this kind of disaster? Is this in Snow Leopard desktop? I know they are thinking this is a business customer focused technology but clearly if it can eliminate this kind of thing then I think it is extremely useful to their non server customers. Perhaps there are other ways of dealing with this issue but ZFS is designed to deal with these issues. HFS+ is extremely fragile to disk corruption.
I know my situation is not that uncommon and this is not the first time this has happened to me with an external drive. You would think I had learned. I hate to think of how many other people have had the same thing happen to them.
Information:
MacBook Pro
Mac OS X (10.5.8)
I have 2 internal Serial-ATA disks:
Both were checked (with Disk Utility and DiskWarrior) and are OK. But only one of the two disks shows in the Startup Disk list in System Preferences->Startup Disk.
PowerMac G5 / OS X (V.10.4.11)
3GB memory
I've got a problem with my MBP. It finally came back from repair centre today. My Harddrive was broken, so they put a new one inside. Everything worked OK, until I decided to install Snow Leopard, and after that put my superduper backup from my external HD to the MAC hd. I restarted the MAC while I kept holding down the "C" button, (snow leopard disk inside) I went to install OSx menu,-> Disk utility-> MAcintosh HD->last TAB (can't remember the name)-> and dragged the External HD in the first bar, and mac HD in the Second. Also I checked Remove Mac HD when copy the Backup to MAC HD. I pressed the button and the EST time was about 2 hours. After one hour my HD made some noise and gave me an error: Something with Failed to load or Failed to copy. After that it did removed my Macintosh HD drive. It's just Gone! I don't know what to do.. Can't install my mac it's completely useless right now..
Here are some pictures describing the situation:
We recently purchased a MacBook Air for a family member. She was using an old MacBook with Snow Leopard. Tried Migration Assistant, but after running overnight, the process hung with "less than a minute remaining." After waiting several hours, we decided to shut down both computers and start over. MacBook Air started up fine, and we were able to migrate from a Time Machine backup. No problems there. The old MacBook was greatly affected. The computer will not start up. The grey screen with the progress bar shows up on boot, but never moves beyond the spinning process circle. I tried booting from the OS install disk to use disk utility to repair it... but the machine seems to not accept the DVD and ejects it.
The only mode that I can boot into is single-user mode. I have tried using fsck to repair the disk, but even after many repeated attempts, it exits with "The volume could not be repaired." I think that this is an issue with the B-tree, which must have been damaged during the improper shut down during the migration. Are there any other options for recovering the computer? Again, this will not boot from the install disk, and the only mode that I can seem to access is single-user mode.
Info:
MacBook, Mac OS X (10.6.8)
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI'm booted on a MacBook Pro from an external drive, and I want to erase the drive inside the MacBook using Disk Utility from the external. For some reason or another, it won't let me do this. When I click on the Erase tab (whether clicked on the disk itself or the volume "Macintosh HD") and try to erase it, it returns with the error:
Disk Erase failed
Disk Erase failed with the error: Could not unmount disk.
When I try to install an image onto the drive, I get a similar error, except it says "Operation not permitted." When I tried it while booted with an OS X DVD, it worked fine. As far as I know, I should be able to do this while booted from the external HD.
I have an external 500GB Freecom USB HDD with two Data partitions on it (FAT32 and NTFS). With a Windows tool, I made the two partitions smaller in order to free up some space (ca. 200GB) for an additional Mac OS Extended (Journaled) partition. This partition I wanted to create with the Mac OSX 10.6.4 Disk Utility. When I pluged in my USB HDD in my new iMac it mounted the two partitions, NTFS and EXT32 and the Disk Utility tool also showed the free (unpartitioned, almost 200GB) space on the HDD. Then, I chose to create a new Mac OS Extended (Journaled) partition and let the tool do it. ...which I probably shouldn't have done. Disk utility stopped and showed an error message saying that it cannot read the partitions anymore and that it needs to be closed. No partitions can be mounted anymore since then on this HDD. Here is the logfile entry of Disk Utility (unfortunately, it's in German):............
View 2 Replies View Relatedi have asus m2n68-am motherboard and amd athlon 5000+ processor, 80 gb sata. when i am trying to install mac os x in disk utility it does not show my hard disk, can you plese tell me what can i do.
View 1 Replies View RelatedMy start up disk is my hard drive.
Whenever I take the hard drive out my laptop just stops working and it's back to normal when I put the hard drive in, is there a way for me to use my laptop without having to physically have my start up disk (hard drive) plugged into my laptop?
My daughter is away at college and has the Mac laptop with no external drive. I have 1 more license for Microsoft Office for Mac 2008 but don't know how to download it via the cloud
Info:
iMac, Mac OS X (10.6.8)
Cannot eject the start-up disk from my PowerBook G4 (laptop). Can anyone help me? My screen is blank too, that's why I'm using the start-up disk.
Info:
MacBook Pro (17-inch 2.4 GHz), Mac OS X (10.7.4)
whenever I run Time Machine on my PowerBook G4 (1.5 Ghz / 1Gb RAM / OSX 10.5.8) it will eat up GB's of hard disk space while 'preparing the backup'. After that it finishes the backup, but I don't get the space back. I'm talking about the internal HD, not the external target disk of course. Does Time Machine use the space to generate some temporary files? Any ideas how I can get my disk space back
