I have a new iMac with two disks- the SSD and the 1TB hard drive. Lion was loaded onto the SSD, so that's my start up drive. I need to migrate all the data from my old iMac (also has Lion) to the new one. When I run Migration Assistant, it thinks I want the old mac migrated , which of course, doesn't have enough space for all the data. I can't find any way to tell it to migrate to the 1TB hard drive.Â
Info:
iMac, Mac OS X (10.7.4)
I am ready to set up my new Mac Pro. I know how to migrate my files from my G5 using Firewire and making the new computer a target disk. My problem is, I have only 1 monitor. Is there an easy way around this, OR of not, can I use my Macbook Pro just a monitor and if so how?Â
Info:
Mac Pro
I have been trying to migrate my data from my PC to my new mac but it always seems to fail.At first, I would begin the migration assistant and then after a while the PC would just crash.But then I finally thought I managed to get it working. It said that process was complete (on both the PC and mac), but there was no data on my computer and no music in my iTunes.Â
PS I also have an Ethernet cable if that's of any use but I don't know how to use it.
Info:
Windows Vista
I have purchased an imac to replace my mac pro. How do send al my data from the mac pro to the imac? I can't tkae both machines in to have apple perform the service. I will sell the mac pro and will need to completely wipe it clean so my data is forever gone from the machine.
Info:
Mac OS X (10.6.8)
So I had Macbook Pro 13 prior to getting the new Macbook Air. Everything is in sync except the iTunes data on my Air. I didn't use Migration utility because I didn't want to completely mirror my old settings. How do I migrate my iTunes data to my new Macbook Air so that I don't have to resync EVERYTHING that I currently have on my iPhone 4?
View 12 Replies View RelatedI recently upgraded my HDD to a bigger one (160G to 500G). The old HDD still has all of my data which I would like to migrate to the new drive. I purchased a device that a tech at a computer store recommended but when I plug in the old HDD (using this device) to my Macbook pro the HDD doesn't show up in Finder! What I need to do to get my data back?
View 5 Replies View RelatedHow do I migrate email addresses and data files from my old HP Pavilion desktop to my new MacBook Air?
Info:MacBook Air (11-inch Late 2010), Mac OS X (10.6)
until the thunderbolt firewire adapter is available, what is the best method to migrate data to a new retina macbook?
Info:
MacBook Pro, Mac OS X (10.7.4)
I've been trying to migrate data to a new RAID setup, but have been running into the error code 36 issue where Mac created invisible files are killing the file transfers. At any rate, I tried about three different directory cleanup utilities and for the most part got almost all the data to move. Now I'm onto the last bit which was giving me permissions errors as well.I used Batchmod to make everything read write and I ALSO CLEARED THE XTARS. Worked like a charm and everthing transfered. HOWEVER. Killing the extened attributes of the files turned them all into Executible files with no program ownership. BTW, there are font files so there are hundreds of them. Is there anyway to re-assign them or get some of the attributes back?Â
Info:
MacBookPro, Mac OS X (10.7.3)
Is it safe for me to migrate all the contents of my powerbook G4 12" to my brand new 13" aluminum macbook? I thought it would be too much trouble to load all my iPhoto pictures, iTunes music, registered programs, and firefox bookmarks. Any downside to doing this? I'm assuming since there are no viruses on OSX, that I will be fine transfering everything directly over to the new laptop are, correct? It's just too bad this is going to take 3 hours!!! All I want to do is play with the new macbook.
View 24 Replies View RelatedI know there are numerous posts already about whether to 'clean install' or upgrade to Snow Leopard, but I can't seem to find an answer to my question anywhere.
I have two computers that I've already upgraded to Snow Leopard - an iMac that's about a year old (with data on it that has been migrated between macs since Tiger) and a brand new MBP which is unblighted by any migrated data. The MBP seems much faster for the upgrade, but the iMac seems a little slower.
My instinct here is to erase my iMac hard drive and install Snow Leopard from scratch, which would presumably solve the sluggish performance issues.
My question is this: I have all my iMac data backed up on Time Machine. Is performing a clean install and then restoring my mac from Time Machine going to give me exactly the same problems as upgrading did? Or would it be better to selectively move data back to my iMac after a clean install?
If I need to do this the hard way (as I suspect) and selectively bring back my data to leave the junk behind, is there anything I can do before running a clean install to make this more painless?
How do you migrate itunes data from an external PC drive to a Mac Mini? It does not seem to recognize the hard drive.
Info:
Mac mini, Windows 7
I tried to use the "migration assistant" to migrate data form my old MBP to my new MBP. Both with Lion.it just clonated the old MBP into the new one (the main user), wich replaced some new apps (ilife, and others) with the old vervions tha were im the old MBP.I tried to erase the Macintosh HD, reinstall Lion from scratch but it happened again. What am I loosing during the process?
Info:
MacBook Pro (15-inch 2.4/2.2 GHz), Mac OS X (10.7.3)
It was bad sign and I had to take my computer to the Apple service.
The intern disk had to be replaced and they told me that they can't recover the date ( not in theyr shop)
How works the data recovery once the disk is out of the computer ? Is there necessarily a "white room" process wich is very expensive ?
Info:
iMac, Mac OS X (10.6)
I have a 15 inch 2010 MBP. When I got it, I migrated all my info from my previous MB. About 4-5 months into using it I started having issues w/ Kernel Panics. I did upgrade the HDD and RAM but the Kernel Panics happened before all of that. I took it to the Apple store and they ran some test on the hardware and software and said they couldn't find anything. Their advice was to just do a clean install. I wanted to avoid doing a clean install on all costs. Anyhow, I said what the who last night and backed up important files and did the clean install,
I have to say that the computer feels much more stable now. I was having a lot of little issues w/ Snow Leopard prior to the clean install. Most of that probably comes w/ me playing around w/ settings a bit too much. Also, I'll admit, I do torrent some software. In my opinion, thats what caused the kernel panics. Only time will tell if I continue to get kernel panics even after a clean install, but I think I'm good to go. So, do you guys prefer doing clean installs or just migrating your data? When Lion comes out, will you clean install or migrate to it?
One of my drives is showing issues that Disk Utility isn't catching or can't find. I've heard about Diskwarrior, iDefrag, Drive Genius, etc... but which one is the most comprehensive, is there a "best of breed" disk app out there or one that does more than the others?
View 3 Replies View RelatedWhen I try to migrate via wifi, or net cable, using the migrate assistants on pc and mac, the computers cant find each other. Message on pc is "waiting for Mac to connect". On the iMac the message "looking for computers". Net: 10 Mb speed home wifi, both computers connected.Â
PC: Win 7 with Panda antivirus and firewall, windows firewall is also turned off.Â
IMac: new with i5 processor, 8 Mb RAM. Parallel and windows installed as virtual machine.Â
Info:
iMac (21.5-inch Mid 2011), Updated iOS, 10.7.4
I have a client who wants me to obtain the data burned on a stock G4-dual 500 DVD-RAM drive (circa 1999). It is a double sided type1 5.2 GB.
I'm looking at currently at current DVD-RAM drives like this:[URL]
But (of course) I want to make sure they will read the older discs (after I bust them out of the protective case!).
I have two hp laptops and a external hard drive that I would like to migrate to my new imac. Both laptops have itunes music on them that I would like to combine and there are a number of other files on each that I need. Is it possible to migrate multiple pcs and the external hard drive? If I combine more than one itunes library will they combine or will there be multiple music folders? What about duplicate music how do I remove or keep from having duplicates in my music folder?
View 5 Replies View Relatedcannot get Migrate from PC to iMac working.The iMac can see shared folders on PC, but the PC cannot connect to the iMac.Both machines share wired router. I can ping from each machine to the other, the PC sees the iMac in the workgroup but cannot connect.Â
I need Migrate to bring over 4 Outlook Express folders (mailboxes) that were left out after two attempts by the apple store to migrate my doc's, photos and email. There is a utility called "Belkin Switch-to-Mac" on both machines.Â
Info:
iMac, Mac OS X (10.7.3), From XP sp3 to new iMac
I just bought an iMac and need to transfer files from my MacBook Pro. Question though, in the transfer are files permanently removed from the source computer or are the files copied from one computer to another with the source computer retaining the original files?
Info:
iMac
1. I've just purchased the Formac Raven 1TB Drive (Firewire 400&800)
(Formatted into 2 Partitions Mac OS Extended Jour)2. I'm trying to copy large amounts of data (100-200GB) from either my 2 internal drives on my Dual 2.0Ghz G5 (OS 10.4.10) or from the USB 2.0 Freecom 500GB Drive to the Raven 1TB Drive.
3. After 4-20GB of data has been copied the copy window just sits there and won't go any further! I have to turn the Raven off and then back on again to stop it!
4. I have tried both FW400 and FW800 ports on my G5, but still the same problem.
5. I have verified all drives and repaired any errors and fixed permissions.
6. The Raven have been low level formatted, and split into 2 partitions.
7. I have a MacBook Pro Core 2 Duo (OS 10.4.10) , and have copied 200GB from it to the Raven without any probs!
8. Any ideas why the G5 won't allow me to copy large amounts of data?
Single file copying is fine! eg. Disk images of 4-7GB
Information:
MBP C2D 2.16Ghz, G5 Dual 2.0Ghz, iPod Mini 4Gb, iPod Nano 8Gb
Mac OS X (10.4.10)
Migrate an address book from a snow leopard iMac to a Lion MacBook pro
Info:
MacBook Pro, Mac OS X (10.7.3)
I'd like to migrate my old iPhoto Library from an external HD to my new iMac. I've copied the 'iPhoto Library' folder to my desktop, but am not sure what to do from there because I've got two library files (?), 'Library.iPhoto' and 'Library6.iPhoto' in the 'iPhoto Library' folder.Â
I've read some of the other discussions re. migrating libraries, but I'm afraid I'm confused! I've been mostly PC based for so long, I don't know all the dos and don'ts of using Mac... and don't want to mess with files and folders I'm not supposed to touch.Â
Info:
iMac, Mac OS X (10.7.4)
I have a iMac with Leopard. It has Intel Core 2 Duo 3Ghz with 4G Ram. I would like to install Lion, but on the system requirement, I can read this sentence:Mac OS X 10.6..6 or later.What does it means? I should firstly migrate to 10.6.6 or 10.6.8 and then I can migrate to 10.7?Â
My goal was to reinstall the iMac from crash with the CD of Lion.
Info:
iMac - MacBook Pro - MacPro, Mac OS X (10.6.3)
I would like to migrate windows7 Professional 32 bits from my existing Parallels desktop 7 VM for Mac where i have already installed Windows 7 and all my applications (of course, to avoid re-installing all applications, including license issues) to Bootcamp on my iMac 27" Quad-Core Intel Core i7 (2012)
Info:iMac (27-inch Mid 2011), iOS 5.1.1
I recently lost my G4 MDD 1.25 GHz tower to a power surge. I've replaced it with a G4 MDD dual 1 GHz. This is a dual boot machine. When booted up in 10.4.11 I can select the 9.2.2 disk but it will restart on 10.4.11 - Selecting Target Mode, it will boot on 10.4.11. The only way to boot 9.2.2 is with an Option start. When in 9.2.2 and using the Start up Disk control panel and choosing 9.2.2 - it boots up from the 10.4.11 disk. Additionally, when a Tiger DVD is inserted and the Install and Restart are clicked - it boots up the 10.4.11 disk.
I installed 10.4.11 and 9.2.2 on two partitions of another hard drive - same results. I Reset-all in Open Firmware. Pressed the PMU reset. I'm out of ideas.
I really hope I'm not the only one to experience this.
I'm running 10.5.7 and Boot camp - is there any way to force my Mac to always ask which disk to start up without always having to hold the option key?
View 1 Replies View RelatedI recently got a new hard drive and I want to install Mac OS X 10.5 and Windows XP on it.
Is it possible to format one partition with the Mac GUID for OS X and the other partition as a Master Record for Windows XP?
Or does Mac OS X/Windows XP dual-booting has to be done through the bootcamp?
I have been trying to burn a .cdr file to a dual layer dvd using Disk Utility. I got it to work once, but I tried four times. I think that it must be very sensitive or something, because I can't figure out any other factor that affects it.
Has anybody else run into this problem, and if so, what's your solution? I think it may have to do with vibrations of the disk drive or something, but I would be lying if I said I knew that for sure...
