PowerPC :: G4 CUBE Falls Out Of Enclosure When Upright
Aug 2, 2007I just picked up my second G4 Cube. This one falls out of the enclosure when sitting upright, though, not a good thing.
View 3 RepliesI just picked up my second G4 Cube. This one falls out of the enclosure when sitting upright, though, not a good thing.
View 3 RepliesI just bought a used cube from a local computer shop. It was abandoned by its owner. I saw the computer running last week when it was in the shop. I went to pick it up today and got it home. I can't get it to power on. The power "button" pulses when I push it but nothing happens. The ACD display that it came with gets power. I have tried reseating ram, reseating the DC to DC board and the graphics card riser.
View 24 Replies View RelatedBought a new power supply thinking that was the problem still nothing and changed the internal battery and nothing. Dont want to send to apple due to finances being tight.
View 4 Replies View RelatedIs there any mod for the cube that would allow it to output component video?Also if i upgrade the video card would it be able to power a 20 inch or so tv?
View 11 Replies View RelatedI have two macs(one is macbook, another one is G4 cube). On my G4 Cube OS 9.2 is running and it is up to date. (last firmware update installed) I want to install mac os x tiger on it but i can not. I tried almost everything but i couldn't install yet.
Firstly I downloaded tiger.dmg and burned into a dvd, then inserted to the Cube. It can read the DVD but couldn't run the tiger dmg file. so i could not install in this way.
Then i connect the macbook to my Cube via firewire and I inserted the installation dvd to the macbook but the result was same. cube can read the DVD but couldn't run the tiger dmg file.
Then I changed the host and target. I saw G4's harddisk as an external harddisk on my macbook's screen and i found the OSInstall.mpkg after I mounted Tiger dmg file on desktop. I choosed as installation destination G4's harddisk and installed the tiger on it. Then i open the Cube and I opened startup disc on os9 to choose os x as startup system. Though Tiger's system files are on the G4's harddisk there is no choise as os x in the startup disc menu so i couldn't start tiger.
What can i do for install the tiger on my Cube?
Just wanting to know for a friend if the stock 8x AGP card from my G5 Powermac would work in a G4 Cube? I didn't think it would but does anyone know for sure?
View 2 Replies View RelatedSo i found a really cheap g4 cube.I was wandering if i could use it as a apple tv.Id upgrade it and put leopard on it so i could use front row.Is there any way to make the cube output video to componet or composite?like the red,yellow,and white.
View 11 Replies View RelatedWould it be possible to install the apple tv os onto a g4 cube,or any mac for that matter?
View 2 Replies View RelatedI recently acquired a G4 cube with no os. It came with the original disks, but the only problem is instead of booting from them a flashing question mark on a floppy drive is shown. I have tried resetting the PRAM and NVRAM which hasn't worked.
View 9 Replies View RelatedI just recieved the G4 Cube from Flyinace2000, MR member of vast integrity and great packing skills.
I want to try to put a new hard drive in it before I boot it up to see if that will help things.
Where would I find a photo guide for Cubes and switching the HD?
I know I can get the bulk of it here: [URL:..] But is there a controller board? I can't find any documentation on this thing. I want to use it for a PC. Making an acrylic top is no problem. Just looking for pin-outs, dimensions, and maybe some pictures of someone else dissecting one.
View 14 Replies View RelatedMy grand dad found some old g4 cube speakers. You know the round ballish ones. They used to connect to a cube with usb. You could just plug it in and they would work. My granddad now has a imac g5. He wants to connect his cube speakers to his IMac.
View 4 Replies View RelatedSo someone offered me a g4 cube and a 32 gb 2nd gen touch for my 160 gb apple tv. I already have a 8 gig touch so i figure ill sell the 32 gig touch cause i dont need all that memory.The specs of the cube are 450 mhz processor,1gb of ram,leopard,and a 20 gb hard drive.Should i do this trade?
View 4 Replies View RelatedI currently have a 450MHz Cube with a standard CD-ROM. I would like to add a CD burner, but I'm debating whether to buy an internal burner, perhaps one that originally came with the Cube, or a faster external version.
View 1 Replies View RelatedJust got a cube and a 17" ADC studio monitor off ebay from different sellers and there is a problem with one of them... when i connect everything and I switch everything on the cube turns on and automatically switches the monitor on but I get no picture. I get the tune that the thing started up but no picture at all
i tried the cube with a very old compaq monitor i had running around that uses vga and still no picture...
I guess it is the cube that is the bad thing... Am I guessing right?
what can I do to solve the problem (apart from getting another cube)
I'm looking to replace my current failing speakers and I'm thinking of getting the old Apple Pro Speakers (with that fancy connector) or the USB ones that came with the G4 Cube. Griffin had their PowerWave thing a while ago that could amplify the USB speakers because the USB port didn't have enough juice to power the speakers like it did on the Cube. My question is, does anyone know of an alternative USB amplifier that could get the job done? Or a way to convert the Apple Pro Speakers into a usable form? I have the unibody MacBook, is this even an issue anymore, or are the USB ports the same power as the Cube's?
View 5 Replies View RelatedThe configuration of my desk is such that I don't have room to lay my MBP flat but I do have room to leave it upright. Will this be harmful or cause issues if it is left upright?
View 13 Replies View RelatedI've got a drive in my iMac G5 that I'd like to put into an external enclosure instead. Would I just need a 3.5" SATA enclosure or should I be looking for something more specific?
View 3 Replies View RelatedHave a Macbook connected to an Airport extreme. If I let the Macbook sit for 15 minutes the connection seems to go to sleep. I have the energy settings and sleep and screensavers set to 45 minutes. Any idea why there is a lag in connection time?
View 2 Replies View RelatedWhenever I lift up my Macbook Pro on a tilt angle the screen falls backwards. Does this happen to you? I hold it on an angle and the screen just falls back. Obviously this only happens if the screen is not completely back in the first place.
View 3 Replies View RelatedI have a 24inch, 3.06ghz, 4gb ram, iMac running snow leopard. It falls asleep every time I use it even when im just surfing the web. I have reformatted the drive, and used techtool pro to see if anything is wrong (it passed all the tests)but it continues to fall asleep. Could this be the ram?
View 6 Replies View RelatedAs the title says, when I boot out of bootcamp and back into OSX, my clock falls back by 4 hours, but the clock on the windows side (Win 7) is running fine. I've done some searching, but have found little useful information and all the threads I've come across (not just on this site) have been 2-3 years old and didn't have any clear answers.
View 6 Replies View RelatedUp until recently I have really loved the Mighty Mouse..It is perfect for what I need it to do...But about a week ago the battery backing for some reason fell off when I picked it up...now everyday it falls off when I pick it up...I know I have the backing on correctly so I dont know what the problem is...
Has anyone else had any problems with their battery backing?
Any cable i tried putting in my 2 month old macbook pro won't click in there and will come loose.
Info:
MacBook Pro, Mac OS X (10.7.3)
My Macbook Pro (purchased Dec 2010) falls asleep when I am in the middle of using it (typing, clicking, watching a tv show).There will be no display or sound, and it will sleep. Most times it will wake up when I click the touchpad alot or close and reopen the screen. However, sometimes I will need to restart. I am not sure why it is doing this all the sudden. It is happening more and more often. How can I fix it? The AC Adapter is plugged in, battery work normally and I set the energy saver so that it would not sleep when plugged in.
Info:
MacBook Pro, Mac OS X (10.6.8)
When I start my Macbook Pro ´13 2013, the grey screen with the apple appears and loads but then it "falls asleep" and when i press a key the mac wakes up but there is a black screen with the cursor.
Things I've tried:
-Safe mode
-Verify Disks- But the hard disk appears to be fine
-Resetting SMC
Info:
MacBook Pro
What is the maximum OS I can install in a G4 Cube? I am trying to update my old Cube.
Info:
iMac, Mac OS X (10.7.3)
While poking around on youtube I found Steve Jobs presenting the Cube in 2000. Seems like it was the mid level headless Mac people call for on the Internet. I wonder is there any interest macrumors? I like the Cube design and the way you were able to access the guts was very cool. Some have written that the Mini IS the natural progression of the Cube but I think the Mini is too locked down. It would be nice to make drive swapping a little more user friendly and maybe have a PCI slot (or two) available. Maybe even the ability to upgrade CPU/GPU. Think of it as a Mac for people who can't leave well enough alone but can't afford a Pro.
View 7 Replies View RelatedFinally got around to reinstall Ubuntu 9.10 x64 natively on my MBP, since I accidentally deleted the partition that was already on there. Anyway, got it all perfectly working, then I played around with the 3D cube. I was freaking blown away how neat it was! Does anyone know of something like it for Mac OS X? I searched, but couldn't find anything.
View 5 Replies View RelatedBit of a strange one to describe this, but I tried to send a message to a lot of recipients and it wouldn't send (I used the wrong server). Now I have an error message that falls off the bottom of the screen and I can't clear it.
View 3 Replies View Related