MacBook Pro :: On Start Up Grey Screen With Apple Appears And Loads But Then It Falls Asleep
Jun 1, 2014
When I start my Macbook Pro ´13 2013, the grey screen with the apple appears and loads but then it "falls asleep" and when i press a key the mac wakes up but there is a black screen with the cursor.
Things I've tried:
-Safe mode
-Verify Disks- But the hard disk appears to be fine
-Resetting SMCÂ
Fairly new MacBook Pro with OXLion. When I try to turn on the computer, the startup noise and screen appear (grey loading screenwith apple icon). A loading bar at the bottom of the screen fills about a third up, then the computer shuts down again.
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked.However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop?
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5) jnl: journal_open: Error replaying the journal! hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
I have a Macbook Air. I thought I had lost it, so I erased it from Find My Iphone. Then of course I found it, my computer was completely erased. When I started my computer I hear the chime, but then a blank grey screen (no apple). I have tried every start up command and reset. I have tried Command R, Option, with and without connecting an Toshiba hard drive that has my computer backed up. I have tried disconnecting everything more my computer. I'm not using an external keyboard.Â
Again, when I try command R, option, command n, D,T, the shift button, etc. nothing really happens the screen is still grey.
My Macbook Pro (purchased Dec 2010) falls asleep when I am in the middle of using it (typing, clicking, watching a tv show).There will be no display or sound, and it will sleep. Most times it will wake up when I click the touchpad alot or close and reopen the screen. However, sometimes I will need to restart. I am not sure why it is doing this all the sudden. It is happening more and more often. How can I fix it? The AC Adapter is plugged in, battery work normally and I set the energy saver so that it would not sleep when plugged in.
When i start the computer and the grey screen comes up with the apple logo etc., a grey "loading" bar has started appearing in the bottom of the screen. Takes a few minutes for it to go away. In the meantime the computer gets very hot and the fans are up to 6000 rpm. Then the os starts up, and I cannot download anything, due to the fact that it thinks my harddrive is full, though i have more than 100 gb of free space.I cant even download the 10.6.2 now due to the harddrive appears to be full
I have a g4 1.5 powerbook that I use everyday.Today I went to turn it on and all I am getting on the start up is the Apple symbol and the hourglass circle that just keeps spinning. I am pretty sure the hard disc is the problem. Bc, I can't hear it spinning.
Have a Macbook connected to an Airport extreme. If I let the Macbook sit for 15 minutes the connection seems to go to sleep. I have the energy settings and sleep and screensavers set to 45 minutes. Any idea why there is a lag in connection time?
Went to the Apple store, explained my problem and they brought out a new iMac for me. Did a retail swap instead of going through the Genuis Bar. I'm so happy =) =) Got a brand new iMac. This time, I disk Disk Check right away, and it says hard drive appears to be OK. No grey progress bar anymore! The problem was probably b/c the hard drive was defective. It had nothing to do with the unsafe shutdown, or pressing shift, etc...
I have a iMac 27'.. Purchased it 2 weeks ago.
I think I did an unsafe shutdown.. Or I pressed "shift" while booting, or something.. Idk and I also have WinXP installed on BootCamp. However for some reason now every time I startup my Mac, it loads with the grey Apple horizontal progress bar with a little loading animation on top. It's so annoying. This didn't happen after no firmware upgrade or anything. And I don't have any extra hard drives attached. Nothing. Everything is fine. Everything used to work. Even with BootCamp before. I think this happened after an unsafe shutdown or something. And also, my Mac has over 500GB free space still, so that's not an issue.
The progress bar at startup Takes 5-6 min extra to boot up. After it, the Mac OS X loads and everything is fine but that's not what my problem is. My problem is why should I be getting the stupid progress bar EVERYTHING I load my Mac?
I tried booting with installation disk, then going to Disk Utility but NOTHING. I click repair, and after 5 mins some error pops up saying backup your files when you can then reformat the disk.
Oh btw, Anytime I click Repair Disk it goes, then says: Updating boot support partitions for the volume as required. And after that it says: "Disk Utility stopped repairing "MY DISK NAME HERE". Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backend-up files.
I have a 24inch, 3.06ghz, 4gb ram, iMac running snow leopard. It falls asleep every time I use it even when im just surfing the web. I have reformatted the drive, and used techtool pro to see if anything is wrong (it passed all the tests)but it continues to fall asleep. Could this be the ram?
I have an intel imac - can't tell you much about the details as I can't get any info out of it. I installed snow leopard about a year ago - no issue since then other than occassionally the screen goes black but nothing major.Yesterday, I backed up to my usual passport backup and then today, it froze. I couldn't turn it off or restart at all so resorted to the power button. Since then, I can turn it on, it goes to the grey screen (no blue screen) and I get the apple logo and the spinning clock/wheel. For hours and hours....So, I tried one of the apple support pages and worked through - peripherals, safe boot, NVRAM, PRAM, tried to reboot with mac osx disc (the original not snow leopard) - nothing. Absolutely nothing changes - same old grey screen, apple logo and spinning clock/wheel.
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
Macbook Pro can't start up beyond the grey start up screen. There's a spinning wheel and bar that moves to 1/4 before Macbook Pro shuts down automatically.
Ever since I downloaded 10.7.4, a blank grey screen appears at startup. If I click on the mouse, a white square cursor appears which I can drag around and `uncover` a place to input password. Then the galaxy image appears, and I have to input password again.
i Was surfing the Internet and all of the sudden my computer turned blue. I closed the screen to 'refresh' it and when I opened it back up some of the pixels seemed to be missing and then it started beeping at me in increments of 3. I **** it down and tried to restart it. when the screen booted up it still seemed to me that the pixels were screwed up. I've managed to get past the blinking image of the earth, however after that disappears a grey screen comes up for about a minute or two and then the entire computer shuts down. This is in the middle of my finals and I cannot lose any of my work!
My fiance unknowingly shut down my macbook in the middle of start up. Before that it was running perfectly fine, I had no issues. After my fiance stopped the start up, the macbook won't turn on. It'll load up to the grey loading screen (example here)... It doesn't make much noise as it starts up either. I have all original discs that came with the macbook, if that helps any.Â
Went to turn on my Mac book pro 2011 or 2012 and it went to the grey loading screen with an apple, spinning gear and a loading bar. Once the loading bar completes my Mac book just turns off. It just keeps doing this, I tried to do a safe boot, but once it was done that it turned off and continues to do this circle of grey screen loading than turning off.
This morning, I synced my iPod with my MacBook and upon completion and permission to disconnect the device, I pulled out the USB cord. At that point the computer instantly turned itself off, and when I hit the power button, I could hear the system trying to start up, but the screen remained black and the sleep light glowed continuously. I unplugged the charger, took out the battery and put it back in, and tried all the troubleshooting tips under the Apple Support guide with no success. I also discovered that when I closed the laptop while it was "on," it would seem to boot up a little more before returning to the black screen. I left it alone for a few hours, and when I tried again to turn it on, it booted up normally and as I was searching for updates, it shut down again as it had earlier.
Does anyone have anything for me to try? I don't want to have to take it into a shop because I can just barely afford to, but I need this computer! Any suggestions would be greatly appreciated :-)
My MacBook Pro (The oldest one, I believe) won't start. After OS X 10.6.5, it will sit at the grey screen with the spinning gear. Safe boot does the same. Verbose mode shows it stuck at "vmnet: netif-vmnet8: Adding protocol 2." I can boot off the install CD and single user mode
New Macbook pro sometimes displays a grey screen on switch on or resurning from standby, which I erase using the trackpad in order to get to the login screen. The same thing happened to the first laptop which I only purchased last November 2011.Last machine eventually slowed right down. Apple genius people say they have never heard of this or seen it.
Info: MacBook Pro, Mac OS X (10.7.3), this is my second laptop in 3 mths
When I try to start my new iMac, the apple symbol appears with the timer and doesn't do anything else. Been through the manual trying all suggestions in there, new with apple macs - 2 weeks old and a start-up problem? Not impressed!!
grey screen no apple followed by blue screen with vertical lines. Graphics and logic board replaced <6 months ago. What to do? I held down shift, it gets HOT HOT and makes noises. (for safety mode) followed by a blank grey screen and blue screen. Then tried the other way (I think it's command alt delete? I don't remember) and it turned from grey (no apple symbol) to blue blank. Then third time, grey followed by blue with vertical lines, not blocky clear lines that you can see if you are close to it.Â