I have just rebuilt a G4 MDD. Works great, except for one thing.I cannot get the Cd drive to open!!
Pressing the eject button on the kyb doesnt do it. The eject button on the actual drive is covered by the plastic tab of the mirror metal.
The new Itunes doesnt have an eject button that I can see, either.I dont see any "eject disk" button in any of the utilities.
I retrofitted a Toshiba dvd/cdrw 2512 in my indigo ibook, following instructions found online. Opens fine with f12 key, and drilled hole for paperclip eject if need. Plays dvds and burns cds great (patchburn installed to burn from itunes too). But, the drive also opens when the ibook is turned on and when it comes out of sleep. Is this a glitch that can be fixed. Not a big deal but would like to have it not open if possible.
View 1 Replies View RelatedI have a regular USB keyboard, not a mac one, so is there a button I can press to open my CD drive? I clicked F1-12 and nothing. Airport extreme card - Ive been reading posts on forums about the eMac and they said the regular Airport card isn't made anymore but the extreme is. Naturally, I was hoping my mac would require the latter so I could easily run out and buy one at an apple store. Unfortunately I found out they don't make the airport extreme anymore either. It's available on amazon and ebay, I know. BUT....does anyone know anything else I can use besides the airport extreme? I want to get hooked up to the internet before Monday so I can use AIM in my room and do some work over the weekend. Anything that I could find at Best Buy or some other store? Or even any alternative ways of getting the internet to work wirelessly (even just temporarily while I wait for the card to come in)? I've been googling a lot but google always want to change my "emac" to "imac" .
View 6 Replies View RelatedCD Drive - I have a regular USB keyboard, not a mac one, so is there a button I can press to open my CD drive? I clicked F1-12 and nothing.
Airport extreme card - I've been reading posts on forums about the eMac and they said the regular Airport card isn't made anymore but the extreme is. Naturally, I was hoping my mac would require the latter so I could easily run out and buy one at an apple store. Unfortunately I found out they don't make the airport extreme anymore either. It's available on amazon and ebay, I know.
My friend gave me his old Apple cube G4 + 15" Cinema display in like 1000 pieces. Its completely teared apart. I tried a lot, but it doesn't work. The original IDE cable wasn't included, so I bought one for 2 cents. It should work or not? Maybe the powersupply. I'm not sure. I don't believe actually that the hardware itself, like the motherboard is broken. When everything is into place and I connect the cube to the powersupply it boots immediately. I don't have to do anything. Harddrive spins and the superdrive makes some noise as well. This repeats itself every 5 seconds. The screen is connected and gets power through DVI, but no display. Both the cube and display have touch enabled buttons to switch it on, but they do not respond (I guess).. Motherboard gives 2 light. DS1 is green, DS2 is red.
View 3 Replies View RelatedI accidentally slid the Hard Drive in the top bay of my Powermac G5 ini upside down. After sliding the bottom one in right side up I and then realizing what I've done, I'm not able to pull the bottom one out to fix the problem. Does anyone know how I might get the casing that holds the hard drives in out of the tower so I can get the hard drives out?
View 2 Replies View RelatedI bought leopard family pack to update the operating system on my intel macbook and g4 733 tower, the problem being that my tower does not have a dvd drive. Is there anyway to use the macbook as an external dvd drive to install leopard which is currently running 10.3.9?
View 2 Replies View RelatedI want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
I did a search for this but turned up nada. How do I open the tray for the CD drive on an i-Mac G4?
View 4 Replies View RelatedA few months ago my cdrom started not wishing to eject my cd stating it's in use (when it isn't). It shows up on my desktop fine, but won't eject. I have to restart and hold down the trackpad button for it to release the cd. That was all fine and dandy and though annoying I can deal with it...however... My computer is not allowing me to open up .dmg files. I have stuffit...I have the standard diskmount that is default in mac computers but when I tried to download firefox and another program they put a .dmg file on my computer but neither will open up and unmount! So why would a download not unmount...nothing for a .dmg is unmounting on my computer. I tried opening stuffit and it appears like it'll open but doesn't...stays in finder just like when I try to unmount the files. Now that I have the .dmg on my computer I want to delete them because if I can't unmount them they're of no use to me. However, my trash won't let me saying they're in use.
View 12 Replies View RelatedI have a dual 1.8 PPC G5 power mac that I bought used about a year ago. It came with OS 10.5 preloaded but the only discs I have for it are the original system disks(10.3). I've got it hooked up to a HP 19 LCD via DVI. The other day I tried to boot into open firmware using the command-option-O-F start up command. Well, something happened cause OS X never came up, but nothing else did either. The screen just stayed blank, the fans starting ramping up and just got gradually louder and louder. I tried entering mac-boot via the keyboard thinking that maybe I was in OF even though I couldn't see anything on screen, but nothing changed.
View 1 Replies View RelatedI bought the lcd to fix up my cracked screen macbook pro. I see how to separate the complete screen display from the base, but would you know how to open up the screen assembly so can get replace the lcd? I haven't started yet, so it would be great to get some advice from all of you experts.
View 2 Replies View Related???
View 2 Replies View RelatedMy co-worker needs help with his iBook.
I switched when the Mac Mini came out, so seeing this iBook from 2001 is pretty interesting.
Anyways, he's having problems with the LCD that when he opens it all the way the LCD turns off. Any ideas for DIY fix? He also wants to know if he can add Wi-Fi?
how to open my mail messages (using the Mail app) by just clicking once? It's possible on my Macbook 2008 model using Leopard but my Powerbook is using Tiger.
View 3 Replies View RelatedSomeone just gave me an old G3 Power Mac that works fine but has OS9 installed. I'd like to put Tiger on it but it has a CD-ROM drive instead of DVD. Looking at the currect drive it seems like a standard CD tray drive. Is it possible to swap out this drive with a DVD drive or do I have to have a special type of drive approved by Apple? I'm doing this so that my kids will have a access to another computer in my office.
View 2 Replies View RelatedDEFAULT CATCH!, code=300 at SRR0: 5555554 SRR1: 40003030
typing 'mac-boot' gets me to a white screen with black lines all down it. It just hangs there.
I tried zapping the PRAM but it didn't help. The hard drive has been making those *click click* 'I'm about to die' sounds for a while. I'm assuming its the hard disk . I have another iBook with a failed logic board I can take the HD out of but in case its not I don't want to take it apart just yet.
After install of OSX Lion (from Snow Leopard). I receive every 10 seconds a message: "Cannot open program ExpressAccountsAgent, because PowerPC-programs are no longer supported". I deinstalled this program with Mackeeper, without result. The message shows every 10 seconds. Is it possible to block this message?
Info:
MacBook Pro, Mac OS X (10.7.3)
I tried to open Safari on an iBook with a new hard drive. Wouldn't open it after clicking and clicking and doubleclicking some more on the trackpad. Sometimes this happens on my 12" PB too. It won't open apps normally with the doubleclick on the trackpad
View 2 Replies View RelatedI have been given an iBook G3 l2 in. laptop.It has mac OS X 10.4.11 operating system.I went to the site for downloading windows media player and was told to use the flip4 mac . It keeps telling me mac error-50 and will not open.I have downloaded it 4 times and each time I get the same results.
View 7 Replies View RelatedI have an iBook G4 which was working fine. A week ago my little sister used the laptop and now I have the following problem:
a) The laptop boots because I get the boot chime, but the screen keeps black.
b) I connected an external monitor to check if the problem was the laptop monitor. When I start the computer, I get a gray screen (in the external monitor), but no apple icon () and cannot pass from this gray screen.
c) I noticed that the caps lock light was not turning on, so I accessed the open firmware (keeping hold the power button - getting a weird chime and a light flashing near the case button - power chime ) and I got the open firmware screen (still in the external monitor) and I noticed that the keyboard was not working also! I connected an external keyboard (usb) and I am able to type.
I know I won't be able to use it as a normal computer because of this weird problem. I was thinking to keep it as a "desktop" with the external monitor and the external keyboard. My questions in this case are:
a) Is it there any way I can boot from cd from open firmware? (I cannot do the "keep the 'C' key hold during start up" because my laptop keyboard does not work.
b) Because I get the open firmware console, could this be a OS problem? What I mean is that if I reinstall the OS, could I at least keep using this computer as a desktop?
You can't open the application PlistBuddy because PowerPC applications are no longer support. THE INSTALLATION FAILÂ YAMAHA 01X mLAN drive...how i can fix the. Imac10.7.3 i5.
Info:
iMac, Mac OS X (10.7.3), 01X MLAN DRIVE HELP
"You can't open the application CanoScan Toolbox X because PowerPC applications are no longer supported."This message pops up when I click on Canoscan Toolbox
View 5 Replies View RelatedMy PowerBook G4 (Alum) died. I've had it for 4 years, taken it with me to Alaska and all over the lower 48, and have had nothing but happy experiences. I knew she was gonna go, but I was hoping she'd hold on until I could afford a MacBook. Alas, no. The problem appears to be the ability of the logic board to communicate with the hard drive. I can hear the HD spin, but even with Disk Warrior, I cannot locate it. The Mac Geniuses at my local Apple store confirmed this and gave me a shoulder to cry on. I've run Disk Warrior, Disk Utility, and tried finding it using the target disk mode - no luck.
The problem is that I've got 4 years of teaching materials, 6000 songs, and irreplaceable pictures on the HD, so I can't bring myself to just trash it. It's true that you only fail to back up you stuff once. This is my once. I've heard that with PC hard drives, you can just drop the old HD into a USB HD box and use it as an external HD. I can't afford professional data retrevial, and I want to give this option a try if it'll work with a Mac HD. Any ideas or suggestions?
on the Mac Pro there is no eject button. You have to use the eject key on the keyboard.
I'm fine with this. However, when there is 2 optical drives in the Mac Pro, how does the second drive open?
My PM G5's Hard Drive has been making wierd noises lately and I'm really beginning to worry that it's failing. How can I be sure?
View 1 Replies View Relateddoes anyone know how to open the DVD drive manually. It won't open if I hold down the mouse button when I turn it on. I had problems trying to install XP in Boot Camp and had to turn off the machine. Now the windows disc is stuck inside that wants to install windows each time I turn it on. It is no good holding down the options key either.
View 1 Replies View RelatedI have a Mac Pro that's kernel panicking upon boot. I was going to try seeing if I could repair it before just reinstalling the OS, but I can't get the DVD drive to open. I have a Logitech Wave keyboard, but pressing the eject key combo isn't working (presumably since drivers for it aren't loaded).
View 7 Replies View RelatedI have never ever seen a picture of a Mac Pro with any of the two drive bays open, when/how do they open ?
View 6 Replies View RelatedLion 10.7.4Â
Pressing the Eject key on the keyboard does not open the DVD tray. Usually the Eject symbol appears briefly on the screen and then the tray will extend. But, this is not working at all. I've reset the PRAM, but still the problem persists.Â
Going to About this Mac shows that the system "sees" the DVD drive, I just can't the the tray to extend. There is no DVD or CD in the drive at this time.Â
Info:
Mac Pro, Mac OS X (10.7.4)
