Power Mac :: Have G5 2.7 Early, Does Airport Extreme Card Need Antenna
Mar 13, 2012
Airport Extreme card and early '05 Power Mac G5 2.7 GHz.I bought the card on Ebay, an antenna was not included. Does the card require the antenna for this model of Power Mac?
Info:
PowerMac, Mac OS X (10.4.11), 2.7 GHz early '05
I know i might recieve some criticism from people but whatever.. it'l help some people out.I got ripped off on craigslist buying a powermac g5 from some punk (literally... he lived in a warehouse with skate ramps and grafitti "art" )Got this powermac, shady south side chicago kid, wont return for an antennaIve tried everything to use the airport extreme without an antenna, never get any signal without the side off. Today i was using a safety pin (a large safety pin for a hoodie or jeans)unclipped it and jammed it in the Dr. bott slot/hole ....wherever the port is on the back of your g5 that your antenna should go.Somehow i realized that it took less than 5 minutes to load a facebook page, i then scanned for networks and damn, i saw my neighbors networks.
old G5 (ver. 7,3) running 10.5.8 OS and want to add airport extreme card. purchased A1026 card, installed and attached attenae cable and external ant, but the profiler shows "no info" under aiport. am i missing something obvious?
Info: Power Mac G5, 1.5 Gb Ram, Dual 1.8 GHz, superdrive
I've recently purchased an airport extreme card. I've mounted it inside the machine, and connected the aerial, but then when I turn the computer on it makes the apple "bong" noise, but then I hear an electric "click" and it doesn't proceed - i.e. the computer screen doesn't power up. I've tried to unplug the machine, and then push the "on" button for 10 secs, before turning it on. When I remove the airport card, it powers up fine, so it just seems to be when it connects it doesn't let me turn the computer on.
I just got an AirPort Extreme Card from Apple that has been refurbished. I installed it in my G5 and then on power-on, the system hangs before the chime even sounds? I remove it and everything is back to normal...
Information: Power Mac G5 Dual 2GHz Mac OS X (10.5.1) MacBook 2.16, PowerMac G3 B&W, PowerMac 8100 AV, PowerBook 540c, Mac Plus
I just installed my new airport extreme base station.
I want to set it up for Mac Address filtering. Can this be done? I only see where it can be set to allow certain times only.
I want to set it like my old D-Link router where only the Mac Addresses listed are allowed on the network, even if the network password is correctly entered.
I would like to upgrade my 17" Powerbook G4 to wireless n, but I'd like to upgrade the internal airport extreme card instead of using a PC Card adapter.
Are there any options for this?Will this airport extreme card from early model MBPs work?
my specs: 17" pwrbk Hi-res 1.67 G4 late 2005 model: Powerbook 5,9
Since I updated to Leopard, some of my video and slideshow programs are lagging on screen. I have done a pretty good search on the forums here, but am getting some contradicting info. What is the fastest video card for my early 2005 G5 dual 2.0 with AGP 8x slot? ATI RADEON X800 Mac Edition Nvidia GeForce 6800 Ultra (what is the difference between the NVIDIA and the BFG cards?) I have an ATI Radeon 9650 with 256MB one single link and one dual link DVI. The ATI RADEON X800 Mac Edition has one ADC and one dual link DVI? Do both of those ports support a 30" Cinema HD display? My 9650 only supports one and it is in the 2nd port so it is annoying having my 23" be my main monitor and the 30" be the secondary.
Information: G5 Dual 2.0 (early 2005) 3GB RAM ATI Radeon 9650 30" and 23" Cinema HD, Macbook Pro 2 GB RAM Mac OS X (10.5.1)
Is Mac Pro 2008 's airport card died? or logic board problem? Mac Pro suddenly show airport card is not installed at menu bar, the system profile also can not find out my airport card?
What is the best and cheapest way to get an airport extreme card? I do not want to do it myself. I just want to know the cheapest and fastest way, because I don't want to spend to much time away from my baby.
I gave a fella a hand the other day by pointing him to a post I had on my site. I thought I'd list in in a new thread for others to see too. So if you want to add 802.11n to your Mac Pro, see how I did it. [URL:...]
I have a first gen Mac Pro, I would like to add an Airport Extreme Card but don't know what the part number is. Does anyone know the part number that's compatible with the Mac Pro?
I got this Airport extreme wireless card (b/g/n)for the MacPro late 2009. There are 2 inputs on the card and 3 airport(antenna) wires to connect it from the Pro. Which ones do I use?
I recently purchased an older model Airport Extreme on Ebay. Came in the original box and looks as though it was never used. I installed it on my G5 single processor which is equipped with an Airport Extreme card. I get my internet from Cox Communications in Tucson via a Scientific Atlanta modem. When I do a diagnostic, it shows everything related to the Airport is green. But, it doesn't work and I have no connection to the internet. What am I doing wrong?
I bought a MacPro two weeks ago and have just taken delivery of the bluetooth module and Airport Extreme card design specifically for the Mac Pro. I've put the bluetooth card in and connected up the cable that has "BT" label on it. I thought it would be same for Airport Card but there's 3 cables to choose from labelled intuitively "1" "2" and "3". All with the same connectors on the end and all taped up together. The Airport Extreme card requires 2xcables to be connected. Anybody out there have a MacPro with Airport pre-installed and can take the side off and have a look at their config for me please? They are supposed to be a service center install hence don't come with a manual, they refer you to the AppleCare Service Source Website.
I currently own a G4 PowerBook running OS X 10.2.8 (archaic, I know) which I use as a word processor. I want to set it up to recieve my friend's 802.11 wireless signal (with his permission), which is sent out by a base station tied to a Windows machine. Two questions I have:
First, will an Apple PowerBook and Airport card be able to receive a signal from a Windows machine (I don't see why not, but...)? Secondly, I seem to only be able to find the AirPort Extreme card on the Apple Store. Will the Extreme card plug and play with my notebook, or not? Are there any good third-party cards that I can buy that will work well if not?
I got a new Mac Pro in December of 2007 that came without an Airport card installed. I'm now looking into getting one to install myself, however I'm a bit confused as to what card to buy. The one available on the Apple website says it is incompatible with Mac Pro's introduced in 2005. So I'm assuming that will not work. I've looked online and have found some like this with model number MB363Z/A.
I THINK this is what I want, however when I enter that model number into google and search a bit I find that some websites have it listed as Airport Extreme Wireless Card for Mac Pro (2008). Now, what I'm wondering is if this will work for my Mac Pro that I got in December of 2007, or not.
As the title says, will the new airport extreme card with 802.11n work in an old iMac G3 capable of adding an airport card? I know I need the card adaptor, but does this new one work fine, or do I need to buy an older version? Also, which old macs would have compatible airport cards?
My university was tossing an eMac so I decided to take it. I put Leopard on it (10.5) and purchased an Airport Extreme PCI Card (A1026). I followed the instructions here: [URL] to a T, and no luck. System Profiler doesn't recognize the card. So, I decided to take the card out and put it back in while the computer was on. The computer came up with the black screen that says I need to restart the computer; however, upon restart it still doesn't recognize the card.
I decided to get an Airport Extreme Mini PCI-E WiFi Card for my 2x3.2 Quad MP and after looking around for a while found several selling online for between $49.00-$89.00 which I thought is a little high for what after some research seams to be a pretty generic part. Unwilling to throw my money out the window I bought this part on eBay for a total of $20.00 including shipping: [URL] The card arrived today 9 days after the initial purchase. The installation took about 5 minutes and the card appears to be working perfectly. I'm unable to test the N protocol as my router does not support it but the Network Utility seams to recognize the card as supporting it.
I just got an airport extreme card and installed it in my Power Mac G5 which is running leopard.
Im trying to connect to my Linksys router downstairs which is password protected. The airport sees the wireless network but when I try and connect and insert the password i get a 'connection timeout' message.
I tried to use the assistant also but when it come to inserting the password its says the password is incorrect even though it definitly is correct..
Im relatively new to Mac so please excuse the lack of knowledge.
I called Apple and they were very unhelpful about which airport card is required for the iMac G5 1.6 Ghz. I found a bunch on ebay (A1126) but I think those are for different models.
I'm running a PowerBook G4 15" FW800 (running 10.4.11) which has only ever connected to the internet via an Orinoco WiFi card, and I'm trying to upgrade it to a better card whose signals aren't stopped by a couple inches of walls. So I bought an AirPort Extreme card on Ebay and hooked it up, but it's not working right. I'm hoping for some advice. Note that I don't have an AirPort base station; I have a Linksys router, which the Orinoco card was able to communicate with fine. Anyway, I got the AirPort Extreme card (no software CD included), and hooked it up as demonstrated in this video. My laptop already had some AirPort software on it, which refused to acknowledge the existence of the card.
I then I installed the software available here, which seemed to overwrite the previous set of software; I also ran Software Update. No matter what, the laptop refused to acknowledge the existence of the card. Applications->AirPort Utility, AirPort Admin Utility, and AirPort Disk Utility all turn up blanks. AirPort Utility, for example, just says it's "unable to find any Apple wireless devices". The software that was there before I installed the software linked to above gave a different message. if I do get the laptop to recognize the card, will I even be able to connect to the Linksys without an AirPort base station or something?
I have a Dual 2GHz PowerPC G5 running OSX 10.5.8 and want to have wireless capability, if possible. There does not appear to be a dedicated slot for an Airport Extreme card on the motherboard, so I'm wondering if there's a card that would work in one of the spare PCI slots?
I have an old power mac and want to get it online if possible .Does anyone know if ots possible to install an airport card into it and get online that way ?