I just installed my new airport extreme base station.
I want to set it up for Mac Address filtering. Can this be done? I only see where it can be set to allow certain times only.
I want to set it like my old D-Link router where only the Mac Addresses listed are allowed on the network, even if the network password is correctly entered.
Airport Extreme card and early '05 Power Mac G5 2.7 GHz.I bought the card on Ebay, an antenna was not included. Does the card require the antenna for this model of Power Mac?
Info:
PowerMac, Mac OS X (10.4.11), 2.7 GHz early '05
I got this Airport extreme wireless card (b/g/n)for the MacPro late 2009. There are 2 inputs on the card and 3 airport(antenna) wires to connect it from the Pro. Which ones do I use?
View 1 Replies View RelatedIs it possible to plug three Xbox 360s into an AirPort Extreme for the purposes of system link and Xbox LIVE for each of them?
View 4 Replies View RelatedAbout a week ago my internet connection would drop out for hours. After setting messing around with my router and modem and reseting everything it would work for a few hours then stop again. My connection is provided by Charter Cable, through a Linksys BEFCMU10 V4.0 modem, to a Linksys WRT55AG V2.0 router. If I removed the router and wired directly into the G5 from the modem, the internet connection would start working perfectly. If I went back, reset the router and hooked it up again, I would lose connection and it would actually take the modem completely offline, requiring the modem to be reset to get reconnected. So I decided I would spring for an Airport Extreme Base Station, figuring the router was bad.
Well I get home with the new AEBS hook it up, and does the same thing. Apples menus and troubleshooting guides. (The main reason I decided to get the AEBS) Well after going through the setup, it says it is not receiving an IP address.
My Airport Extreme isn't recognizing the IP address from my cable modem. When the modem is connected directly to my MBP the internet works fine. When connected to the router I don't get any internet. I have powered off the modem and router and all devices, brought up the modem first (waited for all lights to come on), powered up the router, then the devices. Still nothing. I've tried deleting the DNS server information and resetting - nothing seems to work. There is a green light on the ethernet port on the Time Capsule so I believe the port is fine.
View 1 Replies View Relatedi got a MacPro 09 8 Cores and has no power, i tried taking it down to minimum configuration, I suspect the backboard to be the culprit. I'm an Apple Tech and work at a service center, I already ordered Power Supply and backboard.
Ive been reading that I can use a flathead screw driver to turn on computer by shorting two pads on the board.. i checked the service manual and says nothing on how to jump it, but that u can.. has anybody tried jumping the Mac Pro through the Pads?
I think something might be wrong with the video card. The fan is very loud at all times and gets louder on flash or video sites. The fan speed is usually double the other fans.
Info:
Mac Pro (Early 2009), Mac OS X (10.7.3)
first post the forum but active reader with the site and everything. Hopefully someone can provide me with some good advice and counsel about my computer.2.66 - 4GB model with standard gfx and everythingI have Final Cut Studio installed on my computer and I have shot 1080p video on my Canon T2i. Heres my problem: Whenever I play back the HD video in final cut it usually lags pretty bad - when I play a full 1080p movie thru quicktime with barely any programs open then it seems to lag or skip too.I'm just surprised this machine can't seem to handle such video. I reinstalled my OS a month ago and noticed some improvement. Even with the "Better Performance" option checked in Energy under system pref.
View 3 Replies View RelatedIf you bought an Early 2009 Mac Pro with the 1 TB hard disk drive, what is the brand and model? I am most interested in knowing if the 1 TB HDD is a 32 MB cache or a 16 MB cache.
I believe if you get your Mac Pro with the 640 KB HDD it's only with a 16 MB cache.
My Macbook Pro Early 2009 won't write to disk. It has, since I purchased the unit had challenges reading DVD's at times. It will say "Skipping Damages Section" often. It used to write. Now, when using iMovie, and then iDVD, it takes an hour and produces a blank DVD. Other than a lens cleaner, how do I test the drive before my AppleCare runs out?
Info:
MacBook Pro (17-inch Early 2009), Mac OS X (10.7.3)
Sometimes my Mac crashes, with graphic glitches.This doesn't only happen using OSX. So I think that it is an hardware issue. How can I do? I've paid 2000 euros only 3 years ago. I don't want to change my computer again! Please, don't say me to update my OS. I've downgraded to SL because Lion.
Info:
iMac, Mac OS X (10.6.8)
I just bought the base model Mac Mini yesterday, and I am going to tear it open today to put in a bigger hard drive and more RAM. My question is...since I don't need the entire 4GB of RAM, I am happy with 3GB. The system has one 1GB chip in there already, so can I simply just pop in a second 2GB chip for a total of 3GB? I wasn't sure if they had to be installed in pairs or not. Is there any downside besides obviously the memory not being under Apple's warranty?
View 3 Replies View RelatedI picked up one of the DX4 adapters from Maxupgrades - and it holds my 4 SSDs beautifully. Now I am looking for a host adapter that I can connect all 4 to create a Strip and boot off of. I am currently using a Sonnet E4i but it doesnt support booting. My Christmas wish: an internal SATA host adapter that allows booting and works with snow leopard.
View 8 Replies View RelatedI am moving. I know that mobile and portable devices will work, but will a desktop? I do not see voltage guidance on the iMac casing.
View 3 Replies View RelatedI'm about to pick up a used Mac Mini 2.0GHz, 160HD, 1GB RAM, and with Snow Leopard Server. I don't know much about the Snow Leopard Server OS and I was wondering if I should stick with regular Snow Leopard. I'm only using the Mac Mini for HTPC and streaming media to my iPhone and iPad.
View 2 Replies View RelatedI've had it I've gotten twenty kernal errors. After some perusing of the forums I learned this is not a normal thing, which makes me hate it even more. I haven't altered the hardware on my computer at all.
View 2 Replies View Relatedi'm using the early 2009 2.66ghz quad-core and i'm having some strange line-in/microphone issues. i'm trying to connect a microphone and record some stuff in garage band. in system preferences>sound>input, line in is selected. when i speak into the microphone it indicates it is picking up sound because the input-level meter lights up, but i do not hear it through the speakers nor when i try to record in garage band. i can use the same microphone on my friend's early 2009 2.93ghz 24" imac and record and hear the sound, so i am doubtful it is the microphone. i'm not too sure what else to try at this point.
View 1 Replies View Relatedi wanted to upgrade my hard drive will any hardrive fit it or has it got to be something special?
Info:
Mac mini, Mac OS X (10.7.4)
I am slowly getting to the limit of my 2tb hard drive and would like to purchase the largest drive possible. It is mainly for my itunes library. So if i can split the library into seperate parts easily i could just buy another 2tb. Would like to hear suggestion about sizes of hard drives compatible with early 2009 mac pro or hints on how to split itunes library into diff parts.
Info:
Mac Pro (Early 2009), Mac OS X (10.7.2), its actually OS X 10.7.3
For a while now, my iMac has been having somewhat random display glitches, flickers, freezes, and kernel panics that can only be fixed by shutting down the computer. Most of these screen glitches go like this: The display flickers black quickly, letting me know that an issue is going to arise. The issues that could happen are as follows:A blue line glitch (very common)a random artifact glitch (somewhat uncommon)a freeze-up (very common) a kernel panicÂ
There are several types of "display glitches" I've been experiencing. Some of them involve random artifacts that are randomly displayed and seem to be hovering over whatever is going on on the screen–for example, once I was browsing Facebook and the glitch occurred, so a square of my browser screen was sort of cut out and stuck on the screen above everything else going on. The issue wasn't fixed until I restarted the computer. This glitch, however, wouldn't show up in screenshots. These are somewhat less common because it seems if this one happens then it either gets worse very fast and there are random pieces of my active windows all over the screen or it freezes the computer up entirely, or even results in a kernel panic.Â
Another "display glitch" that is far more common is a sort of line glitch. It's very strange: blue lines will outline random shapes and things all over the screen. Pictures on my browser appear distorted and videos look VERY weird. The dock has the lines and random blue pixels as well. The desktop background appears distorted. This glitch often starts with the screen flickering black and the various blue lines appearing. The lines change shape as the objects on the screen move around.The issue doesn't appear in screenshots but I documented it by taking crude videos and pictures on my phone that give examples.
Here's a link to my video of a video about a nonrelated screen glitch. I was actually searching Google for a solution but it turned out to be unhelpful, but since the screen glitch happened to be going on I decided to record it as an example. Notice how the blue lines move with the video...
NOTE: My computer actually JUST screen glitched and froze up completely, at which point I had to shut it down and reboot. Luckily the post was saved! Just in case you were wondering how often these things occur.
This issue is getting worse and worse. I'm not sure what triggers it, but it seems like graphics-intensive programs like 3D games can trigger it–especially, it seems, when I toggle on and off fullscreen. It looks like it could be a graphics card issue, because if it was a software problem it would seem like it should show up in the screenshots. It's sort of an underwhelming graphics card, but meh. My mom is having a panic attack and backing up everything on the computer and we're thinking about just reinstalling OS X altogether.
Here's some general info about the computer:General info: Model Name: iMac Model Identifier: iMac9,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.93 GHz Number of Processors: 1 Total Number of Cores: 2 L2 Cache: 6 MB Memory: 4 GB Bus Speed: 1.07 GHz Graphics and Displays:Chipset Model:NVIDIA GeForce GT 120 Type:GPU Bus:PCIe PCIe Lane
[code]...
Info:
AppleTV 2, Mac OS X (10.7.3), 24-inch iMac, Early 2009
I'm not sure what the culprit is because the night I downloaded the last update of 10.5.8, the circuit for this room also blew. I don't know if it interrupted the download or not, as I wasn't paying attention. However, the next morning I woke up to the gray screen and it never booted. I finally was able to boot it up and the hard drive had a name like kjkldfjkjdkljafkjadkj. I renamed the hard drive and ran disk utilities on it. It needed to be repaired, so I installed the installation CD and used disk utilities from it. It says everything is fine. However, the hard drive now does not show up under Devices when using Finder. Also, everything seems to be a lot more sluggish now.
View 2 Replies View RelatedI'm looking to the size of the Hard disk drive in my 2009 17-inch pro. But can't find if the case will take a 1T HDD or not. As the 1T drive are around 12mm and not 9.5mm of the smaller one right now.
Info:
MacBook Pro, Mac OS X (10.7.3)
I use a mini display port to HDMI to get the video and i use audio Y cable splitter for the audio.i can get video but not sound. If i disconnect the HDMI cable from the T.V. then i can get sound. If the HDMI cable and the audio cables are connected at the same time i can get video but no sound. I called Sony and according to them there is no setting on the T.V. that would help. My theory is that it's some kind of setting in the imac that prevents it from sending audio and video to the tv at the same time. Unfortunately i have not been able to figure it out.Â
Info:
iMac, Mac OS X (10.6.8)
early 2009 Intel iMac 24". OS 10.6.8.Â
Working in Excel today, I was highlighting groups of cells with color when the entire screen suddenly had a pale grey-green tint. Can still see colors beneath, but everything tinted (not just the Excel window, but the entire display). White, of course, is most dramatic. The Dell monitor beside it is fine.Â
I've recalibrated color a half dozen times (have always had to do that to get the Dell and iMac screens as similar as possible). It's impossible to get white on the Mac. Rebooted several times, including hard boot, zapped the PRam, ran Permissions Repair and Disk Repair from the startup CD. Installed Temperature Monitor to see if there's a heat problem, but I could not find normal temp values anywhere on the Web, so that was something of a bust. Temps attached below in case there's an educated set of eyes out there....Â
Ran some online tests, too, for color distortion, dead pixels, that kind of thing, but nothing reveled.Â
I've been all over the Web looking for some guidelines, but most posts at apple and elsewhere seem to focus on later-model iMacs with the yellow lower screen problem when new (It's not that) or panic screens of wild colors, stripes, and the like. This is just a grey-green tint that covers the entire screen, rendering whites grey-green and colors muddy.
Simple question: Of the new features in the new AirPort Extreme Base Station, which of these could become available to the old AirPort Extreme Base Station via a software/firmware update? I have to think that at least some of the new features don't actually require new hardware. Just trying to figure out if I want to shell out $179 for a new AEBS when my current AEBS works pretty well as it is.
View 21 Replies View RelatedI just got a time capsule and replaced my extreme with it then added my 2 expresses to the network. Was getting 28-33mbps download speeds using speedtest.net to test now i'm getting only 4-6mbps. WTH!!! Also the transfer rate for backing up my macbook to the tc drive is ridiculous!!!
View 2 Replies View RelatedI have an Airport Extreme, with two USB hard drives connected to it. The Airport Extreme shares these disks to my wireless network via Airport Disks.
Upstairs I have an Airport Express, that wirelessly connects to my Airport Extreme downstairs, and extends the wireless network so I get a good wireless reception upstairs.
My problem is, that it does not seem like me Airport Express does a good job of forwarding my 2 USB Airport Disks to the extended wireless network upstairs.
For example, when I use the AirVideo iPhone app to stream video from my USB Airport Disks I get a server connection error when I go upstairs and the iPad/iPhone switches to the Airport Express networks. I cannot reconnect as long as it is on the Airport Express network. If I turn the airport Express off, and thus switch to the poor wireless reception from the Airport Extreme, I can connect to the USB Airport disks again.
The Airport Express is connected to the Airport Extreme in bridged mode.
I have previously time machine backups for two macbook pros on same drive. However, I connect the drive to the airport extreme and although I see the drives and the backups, I can not access the files over Airport Extreme.
Info:MAC Book Pro, Mac OS X (10.6.4)
Just a question for those who have used the Airports. Can a USB hub be used to expand the number of devices the Airport can use? i.e., an external hd, a laserjet, and an inkjet.
View 4 Replies View Related