OS X V10.7 Lion :: Pop Up Error Message With Yellow Exclamation Point Disappears Too Fast Cannot Read It?
Jun 20, 2012
I am getting a pop up error message with a yellow triangle and yellow exclamation point in Safari but it immediately disappears after it appears. This happens so fast that I cannot read the error message. A java applet for my bank's website is not running properly and knowing what the error message is might help solve the problem.
Info:
iMac, Mac OS X (10.7.4), 3.4 GHz Intel Core i7 mid-2011
I'm having some difficulty sending email from my account due to a mail server issue and it would be relly helpful if I could read the error message that drops down and quickly disappears when I attempt to send a test email. Is there any log that captures this so I can read it?
I have a message that pops up and disappears before I can get a chance to read it. I figured it may be an issue with an application since MS office 11 is installed and was running at the times also, before a reminder pops up a message appears. I fear there may be a potential issue with the OS or an application.
I own a PowerMac G5 currently running Tiger. I tried to install Leopard the other night and when I was promted to choose the hard drive to install....I saw a red exclamation point over it.
I know I can backup my entire drive and install on a clean drive but is there any way around doing that? Can I go to utilities and try to repair somehow?
Also, I do have a second hard drive on the computer..
My Mail application and all associated mailboxes have the dreaded triangle sign with the exclamation point in it. I can't send or receive mail in any of the mailboxes although AOL works through the AOL website. It happened while I was sending an EPS file to someone. They received it but I'm dead in the water since then. Any help available? I checked all my setting snad they appear to be right on.
I have a yellow triangle with an exclamation mark on my event. I was working on it and noticed it when I restarted FCP X. Could be that FCP X was crashing while copying or something. But now I don't get it away. But I looked into it.Â
The 4 photo's and 1 piece of music were quickly found in the menu left of the timeline. But there are two strange stings going on:Â
1. Scrubbing through the timeline, at certain points the Beach-ball begins to spin and won't stop. I waited 30 minutes (nothing), restart FCP X (nothing), rebooted (nothing), cleaned with Onyx (nothing): I had to force quit FCP X. I cannot see where it goes wrong, but it's at multiple points.Â
2. While using "relink files" all went wrong. It found photo's with te same name (but in fact other pictures). I deleted those. I went in the library (within Finder) to the Original Files folder, replaced the aliasses of the files pointing to a _Trash folder within the library. I thought the right pictures were back: no. I've dragged those back from iPhoto into the event, with the music also (from iTunes). There double now, but everything is good... except for the exclamation-mark!
Then I made a new library, dragged the project to the new library: copy used clips except the two options given (proxy en render files?). The new event also got a exclamation mark. I played the whole thing: no crashes, no beach-balls, no red missing clips signs, no yellow exclamation-mark in the Timeline Index.
In the original project I can now scrub little pieces (without spinning beach-balls) and I see the pictures on the timeline (in the preview) but with a yellow exclamation-mark in the index...? It cannot be found in the eventbrowser... how strange is that?Â
Since the update to Final Cut Pro X 10.1.3 I cannot go back to a previous library. What do I do. I'm afraid if I continue to edit things will go south later on.
Info: MacBook Pro (15-inch Early 2011), OS X Mavericks (10.9)
I have imported photos from my digital camera to my iPhoto and when I try to view them, I just see a gray box with an exclamation point? How can I fix this so my photos will show up? It has always worked correctly in the past.
If I am scrolling through iphoto, I can see all my pictures, but once I click on most of them, a little triangle with an exclamtion point shows up. I can't see them or send them. Where are my pictures.
Within the last week, all of our computers have developed a 'bouncing E'! The entourage symbol jumps up and down and demands attention, there is a box saying 'Entourage could not read this .rge file', it never stops, it just comes back every half hour or so. I suspect it has something to do with sharing projects, but we have done nothing differently from normal so can't trace the reason. It's possibly linked to when one person sent an invite to all the others asking them to attend and event but I'm not sure.
It was also suggested it might be because there is a lot (ie up to 10 years in one case!) of email in the in box, but we have been doing some clearing out with no result. I don't know much about macs and am in the dark here, and everyone is blaming me as it was my idea to create a shared diary/contacts list in entourage. Some other forum said to find the corrupted file, but I've no idea where to look or even how to tell that it's corrupt.
a friend of mine has some problems with her DVD drive.
It does not accept some video DVDs as it seems, but not always the same, that seems to be varying.
Also there is this strange error message, which I can't get my head around, as NTFS-3G should have nothing to do with CDs or DVDs, as they use a completely different and independent file system. (it's a screenshot of a screenshot by the way.)
She runs Mac OS X 10.5.8 on a 15" Unibody MBP with 2.4GHz and 4GB RAM (early 2009) and has NTFS-3G installed to transfer data onto NTFS formatted drives.
Can anyone give any insight into this?
Or is Praha really a nice town after all the winter geese flew to Karlovy Vary?
Ok so I have an 8800 GS imac, 3.06 intel core 2, 4 gigs ram. Running snow lepord. I need to resolve an issue where I can not get into OSX. At first I got error messeges saying my external HDD could not read, now it looks like its my primary drive because when I restarted I got the progress bar under the apple logo, indicating that something is wrong with the OS. The bar when to full 100% but then I got stuck at never ending spinning wheel. I restarted and no more progress bar but still the spining wheel of death. I really dont mind refomrating its just that I had some important text documents and other files that I cant get back without recoving them some how. How to proceed? I held down cmd v or s (i forgot) on startup and got a black screen with several problem statements. One reads the system boot strapper has crashed trace BPT trap.
error message: itunes library .itl cannot be read because it was created by a newer version. I downloaded and in stalled the latest version of itunes and it did not help.
Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?
In old style view. Every time I touch a message, it turns to read even if I haven't double clicked to "open it". I presume this is because it is previewing but I don't want it to do this. Also, every time I click on "inbox" to look at my messages, the top message in the list automatically changes to read. Again, I haven't opened the email and in this case I haven't even touched it! Can I TURN OFF PREVIEW? I've been looking around but can't seem to do this.
Wondering if anyone else was having any weird issues with their iCloud and unread count in the Mail app on their mac running lion? I can't seem to get rid of a phantom unread message. My iCloud account is fairly new so I don't have that many messages to go through so I know there is not an unread message any where.
I've been noticing a dialog box that appears and disappears in a fraction of a second, just enough to annoy me. It happens at random times, and have noticed it while working in various applications. I've checked Console and determined that this is the culprit.
I composed an email today and it didn't like the way I configured the addresses. I got an error message saying the message couldn't be sent because of the address format. Now, every time I send an email, no matter to whom, that error pops up. My correctly addressed emails go out just fine. How do I get rid of it? Where do I find the draft to delete it so the program doesn't keep trying to send? (It's not in my draft folder)
I get an error message when trying to access the mac app store from my apple menu and any browser. I want to upgrade to iMovie '11 from '09. I also want to upgrade from snow leopard to lion.
I am using a mac book pro 10.8.3. i7, 8gb ram, 2.3Ghz. I use this laptop mainly for producing music on a software called Ableton Live. I also have an audio interface connected to my laptop to avoid latency. The audio inter face is called 'Traktor Audio 2'. Â
Recently when im on the laptop a warning message pops and goes aways to quickly to even read what it is. Also if there is any sort of connection, my logitech mouse has also started to act weird. Whenever i click a single time it double clicks sometimes and sometimes it is normal. i don't understand why either. i did some research on this topic and people said to open up your console and check. I dont understand what it means so i've attached a pic down here.
Writing your preferences to disk has failed. Your preferences may not have been saved. The permissions on ~/Library/Preferences may be wrong or your disk may be full.Â
I have read previous discussions on this (2011) and used disk utility to clear permissions, but cannot find any mail.plist in LibraryÂ
Under Snow Leopard, my Photo Booth app stopped working for some mysterious reason. I was never able to debug why it would not run. Now, under Lion, after migrating everything over from my old Macbook, Photo Booth STILL won't open, and now I get a peculiar error message: Photo Booth quit unexpectedly while using the Apple_AUBandpass plug-in. This is peculiar, since I don't know why Photo Booth would be accessing audiounits.