I just tried to move a bunch of file from the desktop to a folder on the desktop and it copied them - normally it would move them how is this please (I was not touching the control key)
View 4 RepliesI have been using a mac for over 15 years but this one has me stumped.Â
When coping files I have always held down 'option' to copy the file. A small green plus symbol appears and the files then copy into the target folder, or hard drive.Â
I have a Mac Pro, with the latest updates of Yosemite .... but now the files are moving and NOT copying. Â
So when I back something up, they are no longer in the original location, only where i have copyied them to. They disappear.Â
Should I be using cut and paste instead?
Info:
PowerMac, OS X Mountain Lion
I accidentally copied a whole folder of huge photos onto my desktop and now finder is not responding. I've tried force quitting it and relaunching it but it keeps crashing and not responding again. Â
im on a iMac running OS x 10.8.5
I have a Macbook Pro and Lion. This problem just started happening. I have an external hard drive that I store most of my personal stuff on. When I try to move a file from the laptop to the external, I get a message saying that the operation can't be performed because of error code -50.
Info:
MacBook Pro, Mac OS X (10.7)
How can I get files from the Mac OS side over to the VMware/Windows side where I can work on them with Windows apps?
Moving files from Windows XP/VMware Fusion to a destination on the Mac OS side is as easy as dragging files over to Finder and dropping them when the Finder window becomes active. However, I haven't been able to do the reverse operation.
There's got to be an easy way to move files from the Mac side over to XP/VMware.. But I might lose my mind before I discover it.
Recently I noticed that finder is not copying all files from my Sony H50 camera to my external hard drive.
The camera opens as Untitled in the finder window (source) and I usually open another Finder window, opened to my destination directory.
I'll then select all the files I want to transfer from the source,and drag them to the other Finder window.
However, Finder will arbitrarily copy less than my selection.
Even at 20 files, Finder only copied 17 files to the destination directory.
Occasionally I'll receive a message that a file already exists. When that occurs Finder will delete all files processed to that point from the destination directory. There are times when I've transferred over 500 files at a time. I wonder how many photos / files I've lost during the past year!
Wondering if there's a way to make the "Copy" window that pops up show KB/sec or MB/sec transfer rate when transferring files from computer to computer or via wireless to a computer on my network.
I feel like I've seen screen shots of people copying files over a network with that information displayed.
I keep getting the following error intermittently while copying files in Finder: The Finder cannot complete the operation because some data in "<file>" could not be read or written. (Error code -36). I have a 20" Intel iMac with a 250 GB internal drive running OS X 10.4.7 with the latest updates, plus 2 external drives - one a Lacie 300 GB d2 Triple Interface Extreme (attached via Firewire) and the other a Lacie 300 GB Ethernet Disk mini (attached via USB 2.0). The error has occurred 3 times in the space of a few days.
- The first time, I was copying files from the Firewire drive (which was NTFS-formatted at the time) to the USB drive (which is HFS+J formatted). After the error occurred, subsequent attempts to copy and open the file on the source (Firewire) drive were successful.
- When it happened a second time, I had already reformatted the Firewire drive to HFS+J, so they were both HFS+J now, and I was copying files the other way (USB to Firewire). The copy failed with the same error, but on a different file. This time subsequent attempts to copy or open that file on the source (USB) drive failed - the file was corrupt and I had to restore it from a backup.
- The third time it happened, I was copying files from the iMac's internal drive to the Firewire drive. On this occasion, subsequent attempts to copy and open the file that error on the source (internal) drive were successful.
This has all happened in the space of a few days, and has made me very worried - I can't even pin the problem down to one particular suspect drive or cable, since each time the error occurred I was copying from a different drive. The Firewire drive was involved all 3 times (once as the source and twice as the destination) - but the only time a file got permanently corrupted was on the USB drive.
10.8 and 10.9 become a headache copying/moving files/folders between disks. After download selected images to my Imac from cards I used to move all of them to a local network backup disk (attached to a linux OS)
I don't do this anymore from a year ago: annoying warnings like "the file ... is in use" (not in use, even had been downloaded) stopped move; repeated procedure with the rest of the files included the 'used' one, over and over again and finally, after 12 times or so all files had moved. 100 files to move, stop, 80 files to move, stop, 60 files.......Â
Same problem moving files between disks attached to the same iMac.'You have to provide an admin password...." -> Continue  Password set and again 'File ... is in use' (not in use, it is just backup file)Reseting the Mac. Worse
.'You have to provide an admin password...."Â No 'Continue' option, just only 'Ok' that will do.... nothing.My solution: Terminal: sudo mv source targetÂ
I guess Finder has been tought to make life easier, isn't it?
Info:
iMac, OS X Mavericks (10.9)
In windows I could right click a folder and share via other coms in home network. How to I do this on mac.
Info:
iMac, Mac OS X (10.7.2)
How to import bookmarks from pc to mac?
Info:
MacBook Pro, Mac OS X (10.7.4)
Skipping all the fine details, my MBP is having insane freezing issues and I need to reinstall Lion ASAP. But I also need to backup my files since I haven't been able to backup in a month. Yet whenever I try to backup, I'm told: The backup was not performed because an error occurred while copying files to the backup disk. While Trying to repair my external drive thinking it was the problem initially, I verified and repaired that disc and still had the problem. I tried verifying/repairing my permissions for my internal drive, and I get these amounts of errors: [URL]. No idea what these mean.
View 12 Replies View RelatedI am trying to back up all my pictures that are in iphoto to an external hard drive. I just want to copy everything that I have, put them on the external hard drive and move on. How can I do this where I can use these pictures on another computer though if needed? I know that I can move the entire iPhoto library but that wouldn't be compatible on a non-Mac correct?
View 4 Replies View RelatedHi. How do I copy or move backups.backupdb folder from my ext. hdd (WD My Book 1 Tb) to Mac hdd (Machintosh HDD). I use Time Machine for backing up directli on my ext. hdd with one partition. Now I want to make two parttions on My Book, one reserved and limited only for backups. For that reason I need to restore and wipe ext. hdd, and I don't want to lose existing backup, I want them temporaly save in Mac hdd and after reformating ext. hdd put back on it. Any sugestions how to do it on the easyest possible way???Â
THNX
I have rules that sort new mail into a number of mailboxes on iCloud, and also copy the mail to similar mailboxes local to my desktop. The rules seem to want the "move" action first, followed by the copy action, as no mater how I enter them, they are rearranged. After I edit a rule and have the destination mailboxes set, they look OK, but then when I revisit the rule after saving, the destination mailboxes are changed. I am not able to get this to work at all consistently. I have about 30 rules to sort incoming mail.Â
I want to do it this way so that I can get a local copy of my mail and also have a copy in the cloud for viewing with my mobile devices. I eventually delete all the iCloud mail and archive the mail in local folders offline. So it would be nice to be able to get the two copies of new mail in the cloud and locally to work.Â
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
yesterday night I decided to moving (not coping) about 100 Gb of data (two WMWare virtual images of Windows XP)from an external USB disk to my internal hard disk. The process starts and I see it will takes about 3 hours. I decide to stop the process to start it again just before going to sleep.So I click on x button of the moving window.After few seconds the moving process stops. But opening the source folder I had a very unpleasant surprise: no files at all.I check the destination folder: just few files of about 50 MB (obviously). I immediately removes the external USB disk to avoid other damages.Â
1. where are my data?
2. is there a easy way to recover them?Â
Info:
MacBook Pro, Mac OS X (10.7.2)
What's the best way to move my music and photos from my Dell laptop to my mac?
Info:
iMac
Everytime I want to copy, move or trash a file the system asks for the administrator password. I am trying to organize my files for use on my iPad. There are over a hundred files involved. I do not want to enter a password everytime I want to move a file to a new folder. How do I stop the system from constantly asking for a password?
Info:
iMac, Mac OS X (10.7.3), Epson Wrkfrce 840, Airport Extreme
I'm running Lion on my mac mini and would like to move my movie and video files to an external hard drive. What is the best way to do this.
Info:
Mac Mini, Mac OS X (10.6.6)
This only happens when she copies files between internal hard drives. After copying the files, she verifies that files exist in both locations. She then deletes the files in the old location. Then, newly copied files are missing from the new location.
I've never heard of this happening before, except for with improperly unmounted external drives. I have run disk utility and verified that there are no problems with either drive.
Why does my mac stop downloading files, copying to clipboard, saving files to desktop, etc?
iMac g5 1.9 ghz 17" running 10.5.8. Had a hard drive crash and bought a new one. Loaded new OS leapord. Everything works fine at first, but after the computer has been on for a while, it will stop downlading files, disk verify doesn't work. I can't copy and paste stuff. It seems as if the hard drive is full, but I have only used 32GB of 300GB.
When I restart, it works again, then slowly not. Is it an overheating issue? How do I know if my fan is running? Is it a bad hard drive I put in it? Bought it new with three year waranty.
On several separate occasions, one of our users has had trouble with files "disappearing."
This only happens when she copies files between internal hard drives. After copying the files, she verifies that files exist in both locations. She then deletes the files in the old location. Then, newly copied files are missing from the new location.
I've never heard of this happening before, except for with improperly unmounted external drives. I have run disk utility and verified that there are no problems with either drive.
Could anyone help explain why this is happening or how to prevent it?
I'm running Lion 10.7.2 and have noticed in Finder that the contents of many folders aren't visible. This seems to be for newer files added. For example, I copied a folder from a thumb drive, into my (username) -> (Documents) folder. I see that folder name, but there are no files inside. When I "Get Info" about that folder, it tells me, as expected, there are 30 items, and almost a MB of data. Furthermore, when I back up to SuperDuper, I can actually see what I'm looking for - all files are there in that folder and for every other folder! In addition, searching in Spotlight finds any/all of the files contained within the folder. My problem, again, is that no files, none, not one, are visible in various folders, yet they exist, and are retrievable, via Spotlight. Should I do a disk check, or other recommended procedures?Â
Model Name: iMac Model Identifier:iMac9,1 Processor Name:  Intel Core 2 Duo Processor Speed: 2.93 GHz Number of Processors: 1 Total Number of Cores:2 L2 Cache: 6 MB Memory:  8 GB Bus Speed:  1.07 GHz
Info:
iMac (USB 2.0), Mac OS X (10.7.2)
i copied a user folder from my old windows machine it was a ntfs hard dive to my dekstop. I can see the folder structure and the folder took a while to copy over but there are not files in the folders. They seem to be hidden?
View 1 Replies View RelatedIt seems that I've made something and now I can't see my files in the All My Files Finder ...
Is it possible to restore the Finder Preferences to Default ? Or , How can I see all files again ?Â
Info:
iMac, Mac OS X (10.7.3)
Connecting to a Windows Server 2003 share via SMB has an undesirable side effect: after the SMB connection is established, all newly created files saved to the local hard drive do not appear in Finder or in application's open dialog box.Using SMB because after I upgraded a bunch of Mac Pros to Lion 10.7.4 (from 10.6.8 using Apple's latest 10.7.4 installer) these Macs can no longer connect to Windows Server 2003 shares via AFP. I tried the advice given in OS X Lion: Connecting to legacy AFP services url..., but it does not fix the problem.I can connect using SMB, but that causes an unacceptable side effect: after connecting via SMB the Macs' file system no longer displays newly created files. To repeat: If I go to (for example) TextEdit and save a newly-created file to the Desktop or to a folder, that file does not appear in the Finder or in an application's Open dialog box.
These newly created files can be found by searching by name or using All My Files. If I click on the file in the list of found files and nudge its icon a tiny bit, the vanished file will suddenly appear in the Finder. Sometimes on Desktop when a file is made to appear by nudging only the file's name will appear. Its icon will be transparent.I can clear this problem by restarting. All vanished files will become visible. Then everything works normally until the Windows 2003 Server is accessed using SMB. Then the problem returns for all files created after that.My temporary solution is to use muCommander to access the Windows Server via SMB. muCommander does not trigger the problem.
Info:
Mac Pro, Mac OS X (10.7.4)
Since few weeks, finder doesn't work, except when it wants to work..OS X 10.7.3, Files can not be opened sinc the same time
Info:
MacBook
Pro, Mac OS X (10.7.3)
I am no longer able to move files via Finder or on my Desktop. When I click on a file, it is selected and the name of the file is high lighted in blue. I can move it around the screen but it is "stuck" to the cursor. When I let go of the mouse button, the file remains stuck to the cursor and sometimes, I can interact with various elements, i.e. buttons, etc. as if the file had never been selected, yet its icon remains attached to the cursor. After a while, the icon will disappear.I have tried restarting, shutting down and restarting and repairing permissions without success.Also, looks like auto-correction and spelling is no longer working either as it doesn't recognize misspelled words anymore.
Info:
MacBook
Pro, Mac OS X (10.7.3), 15" Mid-2009, 8GB, 500 Hybrid SSD
Is there any way to sort files in my finder first by kind (folders, pdfs, jpegs, docxs, etc.) and then by name? Right now I can only sort by one or the other. If I sort by kind, the files are grouped according to kind, but the names are mixed up. If I sort by name, all file types and folders are sorted according to name. I like the column view because directory structure can be seen easily.
Info:
Mac OS X (10.7.3)
I have been waiting long for Apple to add the function to see raw-files from Nikon P7000 in Finder. The files are called .NRW (not the usual .NEF). Is there any way to see the files as thumbnails in Finder?
Info:
iMac, Mac OS X (10.7.3)
