when i updated my lion 10.7.2 to 10.7.3 a couldn't connect any network (both of ethernet & wi-fi)i did everything about this problem on internet forums. i love my macbook pro but i hate lion!how can i fix that error?
Info:
MacBook Pro, Mac OS X (10.7.3)
Can't download Goerge harrison HD video, get error -50 check network connection. Meanwhile the itunes extra and the non HD video are downloading fine. Tried disabling simultaneous downloads, no help.
Info:
iMac, Mac OS X (10.6.8)
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?
Info:
MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
Over the last couple of months, I sometimes get an error when using the iTunes Store: "We could not complete your iTunes Store request. The network connection was reset. Make sure your network connection is active and try again." It seems happen at random. I click to download an app and I get the message. I click again and it works. Sometimes I'm browsing the store and everything's fine, then I start getting the message over and over for a while.
I tried rebuilding my home network, updating airport software, everything I could think of on my end. Is this a problem on Apple's servers? Do a lot of other people have this problem? I haven't had much luck finding answers on this site or searching Google. I use an Airport Extreme, I have Time Warner Cable internet. I have no other internet connection issues.
My mac is set to automatically connect to the internet, but since downloading Mac Lion 10.7.3, I'm having problems. I have to reconnect to the internet repeatedly throughout the day. I also recently updated Microsoft office - not sure if that's somehow related.
Info:
iMac, Mac OS X (10.7.3)
I'm trying to transfer files from my Windows 7 based PC to my new Mac Air using Migration Assistant and my home BT Broadband network. On three occasions now my PC has lost it's B'B network connection during the file transfer process. The only way I've been able to reconnect my PC to the network has been by unplugging and re-booting the network hub, by which time of course, 3 or 4 hours of file transferring to my MAc has been lost and I have to start again - 3 times now and none completed!
Info:
MacBook Air
I get a pop-up: This Item Cannot Be Downloaded on This Network You must connect to a Wi-Fi network or download it on your computer.yet I am on wi-fi using a macbook pro, trying to purchase a movie from iTunes to download onto my computer.Macbook Wi-fi to linksys to DSL to AT&T 3Mb service. I don't know if this is a hardware, OS, iTunes issue or other.
Info:
MacBook Pro, Mac OS X (10.7.3)
The internal modem in my PowerBook Pro (mid 2010) shows up as "not connected" in the Network pane of system preferences, but I can't figure out how to get it to connect. When I enter my phone number and click the connect button, I get an error message: "Network Connection The communication device selected for your connection does not exist. Verify your settings and try reconnecting." Say what? It says it exists in the System Preferences, shows it in the list on the left. How can it not exist?
Info:
MacBook Pro, Mac OS X (10.6.7)
I created 2nd profile account yesterday and i can update all software on it except on mine
Info:
iMac, Mac OS X (10.7.4)
while installing the update stops and says the update is not completed and there is no problem with the network!
View 1 Replies View RelatedI have Alltel Mobile Broadband. Up until the other day, it's been working fine. I'd set up a network on my macbook after connecting to the Alltel network, then I'd enable internet sharing. Then my iPod Touch, iPad, etc would all be able to go online.
The past couple days, however, the connection just won't share.Anyone have any idea what could be doing this and how to fix it?
I recently added a G-Speed Q RAID array to my MAC PRO to use exclusively for back-up with Time Machine.It worked great.I then decided to also share the external device over hardwire lan with my wife's iMAC so whe could back-up with Time MAchine as well.I then started reading posts that suggested the two Time Machine instances would compete for space on the back-up array and eventually it would fill up a I'd have problems. The solution, everyone said, was to partition the external drive and assign one to each Time Machine back-up.I did this and everything seemed to be working great until the remote client tried to run back-up.
It fails with the "Disk does not support AFP features" error message.Current status, local machine back-up works fine. Remote machine cand find the drive and connect once I provide correct user name and password, but fails once back-up begins.Both machines are running Lion 10.7.4.
Info:
Mac OS X (10.7.4)
The latest Java update has broken my junipe netwrok connect
Info:
iMac, Mac OS X (10.7.3)
I can't get around this error: None of the selected updates could be saved. Software Update can't connect to the update server. Make sure you're connected to the Internet, and then try again. Connection reset by peer.
Info:
Mac Pro, Mac OS X (10.7.2)
Im having problems with software update im trying to update two machines one is running 10.6 and one is 10.7 and i was downloading the update and got the same error message at the end of each download that itunes file was corrupted and would redownload when i reran software update but each time i re run it I get the same error message. I want to know if there is a way to reset the download
Info:
OSx lion, Mac OS X (10.7)
I've searched and don't see anybody else with this problem. I tried to set up an ad hoc network on my MBP so I could use TouchAble with my new iPad. But now I can't get my MBP (or iPad) to see my home wifi network.
(TouchAble is a music performance app on the iPad that controls Ableton Live on the MBP. It works on an ad hoc network so the combo will work on gigs without depending on local wifi.)
I set up a new network ok, with a password. The iPad saw it, but before I tested it further I wanted to make sure I could reinstate my regular network. So I tried switching back to the regular wifi. No dice! The MBP sees the network, but I can't log in. It acts like the password is wrong. Same on the iPad.
Yes, the network works. I didn't make changes to the settings in my router, and my iPhone still sees it with the same password.
I tried a tip I found online and deleted the network preferences file (com.apple.smb.server.plist) and rebooting. No dice. (The system didn't write a new one, as I had expected; I had to reinstate it from the Trash). I rebooted a few times, both MBP and iPad. Nope.
What's going on here? 1) How can I get my MBP to see my network, so I can switch back and forth from the ad hoc to the local network. 2) Ditto for the iPad.
MBP is new. All systems and versions are up to date. No other funny stuff with the network--it's been stable for two years. Everything is stand-alone; this is in my home office. I'm the admin. (But I'm not a techie, so if you start talking about IP addresses and subnet masks, please be clear what I should try.)
Update 2012-002 on macbook pro. When rebooting,after 'successful' install, I now see a repeating cycle of Error = 19, unable to mount root. From my *nix perspective I fear the worst - that the boot sector (at a minimum) is hosed. I tried (running Lion 10.7.x) booting with the command key down - no joy. do not currently have my install disk (sadly, it's in storage, somewhere). I'm concerned about this. this is VERY unusual for an update. This is a relatively new drive (750GB drive installed about 8 months ago). At no point have I seen errors, and believe me, I look. Assuming the worst case is repartitioning? (ah for hte days of 'fdisk /mbr')
Info:
MacBook Pro (17-inch Core 2 Duo), Mac OS X (10.7.4)
I just updated my laptop to the 10.7.4 and now every 5 seconds there is this message in Console:
kernel: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff80119c8000
I also get a bunch of these logged:
kernel: IOSurface: buffer allocation size is zero
kernel: AppleThunderboltNHI::enablePower - turn power on, status = 0x0, result_value = 0x0
I have seen other people reporting this online, but haven't found any here on the board. How can I roll back to 10.7.3?
Info:
MacBook Pro, Mac OS X (10.7.3), 2.4 GHz Intel Core i5, RAM 8GB
Sometimes I am unable to share my photos in iPhoto 9.2.1 as the options are darkened with "No network connection" above. But I am connected, I can browse webpages and send/receive email.
Info:MacBook Air, Mac OS X (10.7.3)
in Mail when trying to send a message: The server returned the error: The connection to the server “mail.comcast.net” on port 995 failed (error 1: Operation not permitted)
Info:
iMac, Mac OS X (10.7.3), upgraded to Lion 10.7.4
after deleting "com.apple.appstore.plist" I get the same message but with (13). Now it#s always the same: (100).
Info:
Mac Pro (Early 2009), iOS 5.1.1
Error "The file “DMAccount.h” couldn’t be saved in the folder “Headers”" after 10.7.3 update. While app update download starts normaly the error msg pops up every time right at the end of download process and it starts all over (dnld-error-dnld-error... ("Try again", she asks me)).
Info:
Mac OS X (10.7.3)
First, is there a way to have a network connection symbol at the top like I have with Airport?
Second, why does it take longer to connect to the network compared to airport? Shouldn't it be the other way around?
I am going to move into a new house soon. I am looking to network the house, so I can use the internet anywhere, share movies,etc. This is my current setup at my apartment.
1 x Mac Mini connected to my TV in the lounge
1 x Apple TV connected to the TV in the bedroom
1 x Main PC in the study room (which all my movies/tv series/music/etc... is stored)
2 x Laptops
1 x Apple 20" Cinema Display
The mac mini is connected via ethernet to the router & the apple tv is connected via WiFi. Its currently a small place so the apple tv can access the router's wireless signal. This is what I have in mind for our new house which kinda big in size. Trash the PC and buy a mac mini server and external NAS storage. The NAS storage will store all the movies/tv series/mp3's/etc. I currently have a ubiquity nanostation2 which I can setup to boost the wireless signal throughout the house so we can use wireless anywhere in the house & tv mac mini, laptops & apple tv can access the wireless (so i do not have to install ethernet cables throughout the house). Also in the future, I would want to install security cameras outside the house (still trying to find a good mac OS X security camera software). Before I buy the mac mini server & NAS, am i missing anything or is there another better solution?
I'm working on a friend's MPB and when ever I try to connect to it from mine (I created the network from my MPB which is almost identical to his), His MPB shows up in finder, but it always says "Connecting..." and then "Connection Failed". Sharing is enabled on his MPB and the firewall is disabled. I have been through everything that I can think of to try and fix this, short of re-installing Leopard. His MBP came with Leopard pre-installed, so there is no need to worry about the upgrade messing things up. I have checked from a MacBook and that one cannot connect either, but both connect to mine with no problems.
View 4 Replies View RelatedI am running into a headache with my wireless network connections. When I close my laptop to put it to sleep, I often lose my network connection. It is easy enough to reconnect; I simply try to connect to a web page, get network diagnostics, and re-enter my password (and click on the "remember password" box). All works great -- until I next close the laptop. It happens all the time at one site, sometimes at home (using Time Capsule), and seldom at the church where I volunteer.
I have checked all my settings and can't figure out what's going on. If my poor memory is correct, I didn't use to have this problem, but it has been going on for the last couple of months. I know I could keep the sucker open, but I want to save power by putting it to sleep -- and the desk where I work at home has a sliding drawer so it has to be closed to close the drawer. (And my network connections are all in the desk also.) I've posted this question to the Apple forum but haven't gotten any replies there other than a couple of followup questions. I am using Time Capsule as my router and I have updated the software
Is this the right place to see my network connection speed? I've never seen it go past 130 or below. Our PCs are at 270.
View 1 Replies View RelatedSo I have a mac pro, sick machine, love it, and want to play some older games, such as half life 2 as the mac port glitces and sucks for me.
So here's my endeavors with Boot camp. Ran the partition and inserted my windows disk.... a note on that. I did not have a xp with SP2 or better so I made one using a program and "slipstreamed" SP3 into it.
I then installed xp. Had a problem thou. When it wanted to start windows for the first time it rebooted and then never went anywhere but a blank screen. I rebooted it manually and it dumped me into windows just fine. No sound, and many other drivers missing. It did not ask me for my Leopard disk like many said it would. So I inserted it and it installed all the missing drivers for me.
However, the network connection did not work. everything else save my numpad seems to work. I have no idea where to start. I have done everything I do on my PC Laptop set up to run fine within windows and the router. I even installed Bootcamp 2.1 as a post said it might be a problem there. IT did say it must be installed prior to SP3 but thats not really possible with my system due to it (SP3) installed with windows prior to reading about the 2.1. I need to connect so I can download files I need to run the games I wish to with this thing, otherwise I wouln't bother.
How can I check to see whether my computer is connected via b, g, or n? I just got the belkin n+ router and wanted to check how my comp is connected. Also, how can I see how fast the connection is (i.e. 54mbps, 300, etc.)
View 1 Replies View RelatedI've got another thing I wish to figure out. I wish to have my iMac and my mate's Asus eeePC netbook to both connect with one another in a network.
The whole main reason I wish is to share my iTunes music library. So he gets to be able to play the music.
Could I get a few links how to set it up for sharing folders, and for sharing music through iTunes.
