I know this has been a wifi issue for many, but this is occurring with ethernet as well on our iMac 2.93. Only began with Lion update. All other 5 Macs (Snow Lep/Lep/Tiger) and several PC's on network have no problem. Have set iMac's internet connections to static/manual ip. Worked for a few days, then back to dropping. This is obviously an OS issue.
After switching to a new provider and getting a new dsl modem (a fritz!box fon 7390) I tried to setup my homenetwork again. Now the weird thing is: my Mac Mini running OSX Lion Server doesn't seem to be able to connect to the internet over its ethernet port, only when using a WiFi connection...When it's connected with ethernet it can reach the dsl modem without any problems, but it can't ping/telnet or anything else through, only over WiFi... As long as I use the mini servers WiFi connection everything works fine, but that doesn't make any sense to me.I've checked the servers setting and the Fritz!box settings and I can't seem to find anything obvious. Of course I could just go on and use the WiFi connection...
ps: all the other computers can connect fine using either wifi or regular lan connection... I even tried the exact same cable with another laptop just to make sure...
I am on a Mac Mini connected to the Net via a FON wireless router and Ethernet directly to my broadband modem. I have had problems with both the modem and an Airport Extreme, which eventually died, but I am back up again with the modem via the FON router.The odd thing is that I can't get Ethernet to work over a direct connection to the modem. Diagnostics tells me that the ISP and Internet fails. I can connect to the modem over Ethernet, however, change its settings etc. in my browser. There are solutions mentioned here involving changing the etc/authorization file, but wouldn't that also affect the WiFi if that was the problem?Â
In short, Ethernet connection to modem works. WiFi connection to FON router and then to the ISP and Internet works. But the Ethernet configuration does't go that last bit, it only works locally. Using that route, I can't connect to the outside world. I have restarted the modem, the computer etc., but that should not be the problem as both works over WiFi, using the same settings for the modem. How do I best troubleshoot this? I am getting an AirPort Express, perhaps it will work better with the modem that the computer itself, but I doubt it.
Info: Mac mini, Mac OS X (10.7.4), 2.3 GHz Intel Core i5
I am sure this may have been asked before , but I am having a problem finding an answer. I have an iMac (2008) and my wife has a ACER E500 PC (No WiFi connection), running Windows XP Media Edition. The only internet connection we have is to my iMac, so as both my iMac and my wifes PC both have Ethernet connections , I am trying to share my iMac internet connection to my wifes PC via an Ethernet cable, I am having no luck in getting it working.
ive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
I have an ibook with Leopard installed and its connected to the internet through airport. What I'm trying to do is share the internet connection to my xbox via an internet cable but i cant find any settings in system preferences to do that.
How to connect my powermac g4 to the internet. I was told that it has the "built-in ethernet" and that all I need to do is config it so it will pick up the wireless signal from the router on the main family computer. But whenever I go to config the network connection, and check the status, it tells me that the built-in Ethernet is not plugged in. Do I not have the built in ethernet? I just want to connect to the internet, but I don't want to spend over $120 to have geeksquad come and do it if I can just do it myself.
I currently have MacBook 13" and iMac both running on Snow Leopard. I have no problem connecting to the internet via Airport Express wifi but if I have to connect directly to internet from Ethernet port using Ethernet connection I can't connect to it. The Internet and Server lights are showing "amber" in the network diagnostic tool.
The modem is the DLink DSL 302G. I have used http://10.1.1.1/ to ensure the username and password of the ISP are correct. What I don't get is if it works via Apple's Airport Express router why wouldn't it work with straight Ethernet connection from the modem?
I connect to the internet mainly through an ethernet cable, connected to my own base for ethernet connections (Might be a router, but doesn't connect directly to the internet) which is connected to the main Linksys router on the other side of my house, which even has a wireless connection.
Regardless, this setup has worked without issue for a long time now, but all of a sudden now, I cannot connect to the internet (On my Mac).
I have tried unplugging the routers, for extended periods of time, plugging them back in, but I cannot connect to the internet. Whats awkward, is that when I check the Network settings in the System Preferences, it says clearly is that the Ethernet Cable is connected (Which it is), and as a backup, I have even connected to my Wireless Network through AirPort (Which says it is connected), but I cannot connect to the internet through Firefox, or any instant messaging service.
On the main computer, with the main router, the internet works fine. When I try to load Firefox on my Mac, it sometimes takes a long time loading (On a blank screen), and never loads usually (With occasional loads, but usually does not connect).
The last few days I've had a problem where the Internet network connection speed on my Power Mac slows to a crawl (about 1Mbps) and can only be fixed by re-starting the Mac which restores normal connexction performance for a while. The Internet connection runs at around 35-37Mbps and is routed via a BT HomeHub 3. The laptops which connect via WiFi don't show any slowdown in speed tests, only the Mac Pro, which is connected to the Hub via Ethernet. I've tried swapping between the two Ethernet ports on the Mac but it doesn't make any difference. The HomeHub has been in for about 5 months but this problem has only just started in the last week or so and the period for which the restart restores the network performance seems to be decreasing. Is there any way to reset network software, or some prefs I could delete? It's an early 2008 eight-core Xeon MacPro running 10.6.8, 8GB RAM.Â
I just got a new MacBook Pro, but my wife uses my old 1.25GHz Alum. PowerBook. My MB pro flies, but unfortunately, the wireless ethernet on my old PB is slow as hell. I've got 11+GB of free space left on my hard drive and Safari or Firefox are the only applications I have open. I also have a cable internet connection with wireless through my 1st Gen Airport Express, yet it's still slow.
I was wondering if it is possible to connect a desktop and laptop computer using apple share or bluetooth to share an internet connection that is connected through an ethernet port on the desktop. My internet company is crap so I need to find a way to cut out the router, which I have to reset all the time to get a normal internet speed.
Desktop is a Mac Pro bought last April, and the laptop is a 12" Powerbook G4. Both have bluetooth, airport, and the newest operating system.
i share a house with my brother, lucky me He got a PC with Vista in his room. I got a lovely imac in my room. He gets the broadband cable direct into his room. It averages 40 mbps download , 1.67 upload. We use a wireless Netgear router one thats suppose to handle N wireless and i pick the wireless up on the airport extreme in my imac. Unfortunately i only get about 12 mbps download , 1.20 upload, even though i'm only in the next room. We both play WOW online. It works so much better on his PC cos of the internet speed. Could I use a gigabit ethernet connection between the PC and imac, to share the internet and still play WOW independently?
I have recently had to stop using my wireless router and connect directly from my modem to the WAN port on my computer. However, I can only achieve an internet connection when I direct connect into my PowerBook G4. When I try to connect into my iMac, I get nothing.
i've recently got the Ethernet adapter for MBA and I am still unable to connect to my home internet connection... It continues to give me a "self-assigned IP".
I had no trouble getting on line until last week when a message came on that
IP address 192.168.0.139
was in use by
04:0c:ce:54:c1:e5Â
DHCP Server 192.168.0.1Â
Since that time, no matter if I plug it into one router or the other (I use a router in my office to share the one ethernet cable that comes down the hall) it claims that the ethernet is working and it knows that it is connected to the Internet,but it cannot access the Internet. IT seems to be stuck in a cycle of navel-gazing, constantly focused on its own ethernet IP address.
All I know how to do is operate the thing; we have no IT person here. A visitor set up our network for us a few years ago. Only the iMac has this problem; my PC laptops go online just fine. But all my work is on the iMac.
I have a MacPro Early 2009, 2 ethernet ports.Ethernet 1 is connected to the LAN and Ethernet 2 is connected directly to a SSL Matrix console (an audio mixer), whom driver needs the used ethernet port to be first of the list in the Network connections list in System Preferences.So when I browse internet I can't use the Matrix's software, and vice versa.I had to create 2 different network positions to browse internet and to work with SSL Matrix, one with Eth 1 first place, another one with Eth 2 first place, and I always have to swap positions.Is there a way to force OSX to use by default the 2nd connection of the list for internet access?Â
Info: MacPro 4,1 8-Core 2.26 GHz, Mac OS X (10.6.8), 12Gb Ram
I'm connecting over ethernet using PPPoE, and my problem is whenever I restart the computer, I have to go into Network Preferences and click "Connect" for the ethernet connection (the password and all other info is saved - I just hit connect and it instantly does so). I think it's because it's trying to connect via my wireless network, although I have Wi-Fi turned off, and it remains off when I restart. Any way for ensuring that the computer automatically connects through the ethernet connection?
We just bought a new iMac this afternoon. Haven't been able to connect to the internet, although the assistant says the connections are working fine. The ethernet light is green. Safari continually shows a message that says, 'your computer isn't connected to the internet."
My Linksys WRT610N with the latest firmware worked fantastically on multiple Windows 7-based ThinkPad. However, three (3) different iMac's have had the very same problem of dropping the connection and of my having to powercycle both my cable modem and the W610 router for it to work again at all! Once it drops the active connection, that's it. I have tried a few different settings and nothing has made a difference.
Can you maybe help point me in the right direction or should I just ditch it for an AirPort Extreme or Time Capsule? One additional point: It works worst in the 5GHz frequency band, even though there are none in my neighborhood, and if there are, they have their SSID's (network name) hidden. The 2.4GHz band is extremely crowded where I am which makes it difficult to enjoy my WiFi connection.
Every time the computer is restarted, the machine permanently loses its connection to the domain. After the initial binding, the Directory Utility light was green and it told me the computer had connected to the server as expected. However, after restarting, the light turns red and Directory Utility tells me that the server is not responding and no domain users can login. Nothing fixes it except for a rather disruptive and time-consuming unbinding and rebinding to the domain.
Obviously "don't restart the computer" will only work for so long, and already the user has restarted their computer once "out of habit" (which hopefully we will be able to break, lol), but still, I'm looking for a good way to fix this problem permanently.
I have an iMac 2.7 i5, 8GB, OS X Lion 10.7.3. I purchased this iMac just about 3 weeks ago and from the beginning experienced regular dropping of the internet connection. I have cleared all other networks that appeared in the Preferred Network window other than my own. I have also unchecked the "Remember what other networks this computer has joined" box just in case I needed to. No luck. I am using an ATT 2Wire wireless router that's just over a year old but I haven't experienced the connection drop problem with an older Macbook (about 4 years old) that I also own.
I recently upgraded to Lion OS X v 10.7.3, and i like iMail 5.2 when I work from my office or home.BUT, when I am working in the field I often have access to only glacially slow internet via an internet modem, and iMail takes FOREVER to download my messages. Way longer than my pre Lion version of iMail.Is there a way to optimize iMail 5.2 in order to optimize for slow internet connections? For instance, to partially retrieve large messages? Or to somehow deactivate all the synchronizing and other Activity that goes on in the background?
Info: MacBook Air (13-inch Late 2010), Mac OS X (10.7.3)
I'm running OSX 10.5.8 on a Macbook Pro, and today I've been unable to connect to the internet via ethernet or wi-fi, unless I'm in safe mode. Then everything seems to work as it should, which makes me believe that this is a software issue rather than a hardware problem. I've tried making a new account with administrator priveleges, but that doesn't solve my issue. Does anyone have any advice on how I can connect to the internet under my normal user account, rather than in safe mode? I should note that I won't be able to get my hands on my repair CD or perform a clean install of OSX because that stuff is at home, and I'm in college. Also, I'm at a university and don't have a router. I just use the campus-wide wi-fi. Finally, my roommate has no problem accessing the internet in our room via ethernet or wi-fi, but I do. Thanks for the help everyone.
When I try to get email or go on the internet in general after being away for a short while, the internet is not connected and has trouble connecting. I have DSL and should always be connected. I also have a laptop (non Apple running Ubuntu) and there is no problem there.
Info:iMac (21.5-inch Late 2009), Mac OS X (10.7.3)
I am experiencing some problems when I use gmail, yahoo, or hotmail. When I click compose new message in any of these email services my internet connection is disrupted and all the pages I have opened either reset or the browser says it does not have connection. I have used the disk utility to repair permissions and that does not seem to change anything. I have not been able to find anything about this problem being discussed on the internet. I log into an email account, and I click compose message; the internet then disconnects for a few seconds. If I am streaming radio that resets.
Ever since I upgraded to Lion, my imac loses its wifi connection when it sleeps.When i wake it up i have to always go up to the wifi icon on top right of screen and wait till it sees my network and then say connect.This never happened in snow leopard, seemed to stay connected.
Since the update I have had applications hanging and crashing. Mostly Mail, iTunes, and Safari. What is more annoying however is when the computer is inactive for an hour or so, I lose internet connectivity and have to shut down and reboot in order to get it back. I am on a wired connection and sharing another wired connection through the second ethernet port.It seems like 10.7.4 really messed with my machine...
For specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info: eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
