OS X V10.7 Lion :: HP Photosmart C4280 Shows USB Not Connected Message?
Mar 15, 2012
I have an HP Photosmart C4280 printer that works fine when I want to print, but when I try to scan with Image Capture here's what happens: I can do an Overview scan, can see the document in the window, but the button to the right of overview does not show "Scan,"but a greyed out "Cancel."When I try to manually scan from the printer, an error message pops up in the printer window that says "USB not connected?" I'm pretty sure that the latest drivers are installed.
So I got this printer with the buy a mac deal, the only thing is I can't seem the find the model when I try to set up the printer.
There's no Photosmart C4280 under the list of printer models on the list. Can anyone help? Whenever I try to print something offline it'll just keep taking in loads of computer paper but nothing comes out.
When it does print it prints werid stuff like "dup 33 /R put dup 34 /a put dup 35/l put etc etc readonly def /fonttype 42 def /fontmatrix matrix def."
I have a 13" MacBook Pro and it is not connecting to the internet! Airport says im connected to my internet connection, but safari won't load the internet. I tried Firefox and still, the same result. I resetted the modem and the router, but still nothing. The internet connection on my other computer works fine. So I got on the Windows partition and it connects to the internet! So it's just OSX that won't let me connect cause my Windows partition works fine.
I am useless with computers and i am trying to connect my macbook to my LG tv via hdmi.i have connected the headphone jack to the audio on my tv but i don't get any sound also how do i get my macbook to not go into sleep after 10 mins?
I found out what the problem is but i'm not sure which cable to get.My TV manual says 'Connect a D-Sub cable between PC IN [PC] connector on the TV and the PC output connector on your computer" (did that part <<) and then "Connect a PC Audio Cable between the PC IN [Audio} jack on the TV and the Audio Out jack of the sound card on your computer. . The port is next to the VGA cable in the pic.
(I've checked the internet/a couple other threads here, but they didn't seem to relate to/resolve my problem)
Okay, this stupid printer has caused me problems from the start. The only reason I have it was because my mom(who is a PC user) bought it since it was compatible with both operating systems, and I wanted a scanner.
The whole scan thing wasn't working for me until I finally figured out on my own to install a new driver, and then it was "fine". But the whole process was slow, redundant, sucky, etc.
It was working - if not well, smoothly - until today, when I started getting kernel panics whenever I attached the included USB port onto my macbook.
I was getting frustrated, and no amount of restarting/researching seemed to get anywhere, so after checking software updates, I uninstalled the driver and reinstalled it. Then the setup kept "unexpectedly quitting" whenever I clicked "next".
I repaired the disk, and checked software updates again(apparently there was an HP thing to be downloaded). Now, no printer shows up on the second step. Help?!
I'm fairly certain everything is connected correctly, and the printer is definitely working in terms of connectivity to the electrical outlet, so what is the problem? Am I missing an important step here?
I saw this mentioned in a few other threads, but I thought perhaps it deserved its own thread. Anyone else having this problem?No matter what I do, iPhoto is convinced that I'm not connected to the Internet and refuses to do anything with Places. I recall telling iPhoto to feel free submitting my information to the net when I first ran it, but now I can't find any related settings in Preferences. Not sure what to do.
MacBook shows that charger is connected, but it will not charge past 3%. It says battery status is normal. I have tried using three different charger cables.
Every time I come back to my computer and wake it up, it shows full connection to my network but will not work. After I turn the wi-fi off, and back on, it is fine. How do I get it to work without having to do that every time my computer goes to sleep?
I had not scanned with my HP Photosmart since I bought a new iMac. The printer prints just fine. HP is no help saying that a software update comes with Lion. Obviously it does not work since my HP utility just puts up a complex error message consisting of a lot of computer code.
OS X 10.9.4 / 3.2GHz Quad-Core / 16GB DDR3 Mail 7.3 (1878.6) IMAP Server at InMotion Hosting
I continue to see messages in my mail folders that have the header information (From / Subject / Date) from one message in the message listings, and the From / Subject / Date of a DIFFERENT message in the message preview.
This is NOT Google. The IMAP server is from InMotion Hosting. On the server, the messages are accurate: the From / Subject / Date information is attached to the message body it represents. It is only in Mail that the information gets scrambled.
I have used the Rebuild for this mailbox, which usually corrects the problem. On occasion, I have to delete the mail account from Mail and add it back in again to force an accurate rebuild.
I have iMessage/SMS forwarding turned on on my MacBook pro. When I type a new message, it allows me to search by contact name, however when I select a contact, the name disappears and Messages only shows the contact number. When I get a notification, the contact name shows, but the Messages window still only shows the contact number. iCloud is turned on and contacts are syncing.
I've seen several replies that say to go to "details" in the Message account tab, but once I enter my password there, it doesn't show me anything new. I don't use Messages on my Mac very often, but I'd like to try to solve this issue.
Info: MacBook Pro (13-inch Early 2011), OS X Yosemite (10.10.1)
How do I continue to use my HP Photosmart C3100 series All-in-One for scanning with the loss of Power PC support? The scanner interface has been deactivated. I do not want to add a perfectly good printer to the landfill because of Apple's short sited approach.
Info: Mac Pro, Mac OS X (10.7.4), Converted to Lion for use of Cloud.
I have sent a message with Apple Mail 7.3 on Mac with OS X Mavericks 10.9.3, and it shows DUPLICATED in the Sent mailbox of Mail. I mean, two entries with the very same message inside are displayed, yet, as said, I only sent it once! I am using POP.
Selecting "Mailbox - Rebuild", quitting and opening Mail, repairing permissions with Apple Disk Utility, restarting the Mac, and even resetting the PRAM does not fix it. I have seen the following article, but cannot find the "MessageSorting.plist" in Mavericks that it indicates: How to Fix Duplicate Emails Sent From Apple Email..URL....
how to prevent this duplication behavior (beyond deleting one of such messages, which, of course, I can do); I mean, to fixing whatever is corrupted and prevent such behavior happening again in the future? What is the equivalent of "MessageSorting.plist" in Mavericks to do what indicates the above article?
Info: Mac mini, OS X Mavericks (10.9.3), Booting from internal Fusion Drive
My MacBook Pro with Lion sees my printer as a Photosmart C6100 series [964C01]. Says to "Print Using" Photosmart C6100 series. When I click add it tries to download the drivers however says the software is currently unavailable. If I try to add it manually using IP it says the update server is unavailable. The console log shows:
PrintUITool: Property list invalid 'for format: 200 (property lists cannot contain objects of type 'CFType')
When I try to take a photo it says the camera is not connected. It used to work with these applications. I did all steps on Apple Support Page [URL] but it still doesn't work.
When starting FCP X, it comes up with an error message that says, that it is unable to connect to my NAS-Server (located at home, not at work). First i thought this is because i have a project linking to some files on the NAS, but later i found out, that FCP X tries to connect to the media of Iphoto, which is located in my home network on a NAS even if there is no project containing any pictures of Iphoto.
The error message continuous to appear even if i click OK. What to do?
I have a little problem with one of my applications. The application is very important for me and I need it nearly every day. But now it shows my an error message. 'JVM terminated. Exit code=-1' [...]
I'm using Mac OS X 10.6.4 and my system is up to date.
I am using the Mail (5.2) app in OS 10.7. I have my Inbox sorted by decending date, i.e. newest mail at the top. When I delete a message, Mail currently selects the message above, i.e. the one that had arrived after the deleted one chronologically. Since I work through my emails from newest to latest (usually), I will already have seen the newer mesage. What I want to see is the next message on the list, i.e. the next one, which arrive before the deleted one. My question there is: How can I advance to the previous message rather than the next one (chronologically) after deleting a message?
Well the title says it really. I'd like to change the page Safari displays when not connected to the Internet. Working for a business that sells Macs, I'd prefer something that looks a little nicer when the network is down.I know that it's a Localizable.strings file...located here:Safari.app/Contents/Resources/English.lproj/Localizable.strings )
I just set OS X Leopard (10.5.2) up on my MBP again. I also use it on another MBP, a Mac Pro, and a Mac Mini but have an odd problem. I set up Back to my Mac but didn't see up file sharing, only screen sharing. Whenever I connect to the MBP from another computer on the network it says "Connected as: VNC" I don't remember that from before and whenever I connect to another other computers on my network I don't get this message. What does this mean? Is this something I should be concerned about?
I have a HP Photosmart B110 printer/scanner and I'm running OSX 10.7 Lion, I have no dramas printing but the scanner is not recognised.If I go to System preferences> Print & Scan, it shows the printer but won't show the scanner!! I obviously want and need to use the scanner but am unable!
My MacBook Pro 13", running on latest update, is showing a completely blue, plain blue, desktop background. It changed all by itself. When I tried to reset it by right clicking on the image I want on my desktop and selecting "Set Desktop Picture" nothing changes. When I go into my settings and try to change it that way, the image I want as my background shows as already being my background, yet my desktop is still blue. Tried rebooting already.
When I get my email from the email icon on the desktop, it is not from the person it says it is from when I click on the name of the sender.And the mail that appears is not listed on the left with the mail received list.If I go to Safari and that to ICloud I can find the mail from the person listed, but the wrong mail that appeared doesn't show up as sent.
I'm running final cut pro X version 10.0 and I would like to update to 10.0.4 but the app store shows "all apps are up to date" Anyone encounter this before? When I run FCPX and go to about it clearly shows I'm runing 10.0. I've checked for software updates and that has not found the update either. This link says I can download it from the app store. When i launch the app store it says "Install" and when i click that it says, i've already purchased final cut 10 and cannot instal it? I just want the update?
