Wireless printing has suddenly stopped working. It worked one minute, then a few minutes later didn't! Is this an OS problem? Using Airport Extreme for wireless and everything has been fine for 4 months with iMac and old Macbook.
Info:
AirPort Extreme 802.11n (5th Gen), Mac OS X (10.7.4)
I am unable to print using my hp B210 wireless printer from my new macbook pro.
Info:
MacBook Pro, Mac OS X (10.7.4)
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
I am unable to print from my macbook using wireless connection to my home wifi. I am using OSX 10.7.4.
I have a failure to communicate to printer message and a On Hold message (authentication required)
Info:
MacBook, Mac OS X (10.7.3), Attempting to connect to HP Printer
I moved up to the HP P1006 since my 1020 was not compatible with 10.6. It has been working great until a hotel sent me a receipt in pdf format. I open the file try to print from the pdf and from the mac, both ways and I get this:
/usr/libexec/cups/filter/pstoraster failed
I am not a techie, and have no idea what that means. Anyone have an idea?
I open System Prefs and click 'Print & Fax'. I click + to add a printer. The dialog box opens for a few seconds and then closes. Just that window. I cannot add a printer at all or even print anything for that matter. I ran Printer Therapy and it finds nothing wrong. Same with TechTool Pro. Nothing seems to be wrong except this.
View 6 Replies View RelatedI hooked it up to my network and everything and the wireless printing works great.
Recently I had to take the printer out, so I unplugged it from my modem and plugged it in somewhere else for USB use.
I tried printing something, forgetting that I couldn't print wirelessly anymore.
I am using Mac OPS 10.9.4 and iPhoto 9.5.1 systems I have just tried to print photos using an H-P Photosmart 7510 printer and am not getting results because I get a message that the paper size is not correct or the print comes from the regular 8 1/2 by 11 tray and not the photo tray which I have told it to do. I also have an H-P Photosmart 335 printer that I have not been able to use because I get message saying the paper is not the correct size. In the past I was able to adjust easily the paper sizes and get good prints. Now, I am not getting any prints because of error messages. It seems to me that updates installed to my computer change the way I am use to doing therefore causing me to learn new ways of operating the jobs I want to do. It is a waste of my time learning the "improvements" the updates keep installing and not improving the way I have been use to doing various tasks.
I do not print many photos so there is some time between the task and Apple has "improved" the system and I have to go back to square one to learn the new way or install another app.
Info:
iMac (20-inch Mid 2007), OS X Mavericks (10.9.4)
I have a wireless printer that has stop working..HP 6510..
when i try to print the queue says the uri is incorrect or no longer exists and then pauses the printer with the statement Communication failure..
Yet.. when i go to the printer setup and look at the options i'm able to see the printer and send a test print, can't from the queue itself
I've tried reloaded the latested driver,,,re installed... verifying disk permissions.. i can ping the printer, get to it via a web page,,,
Note when i try to build the printer during the final set up it says communication error..
Info:
MacBook Pro, Mac OS X (10.7.5), Hp printer 6510
Well, after sitting on the snow leopard fence for a while, I decided to install it this weekend. I now am unable to print to my Epson Artison 800 printer. Apparently I need a Driver for it, but the Epson site is a bit confusing when trying to select exactly what I need to download.
View 3 Replies View RelatedUpgraded my iMac (2010) from Mavericks to Yosemite yesterday. Since when, anything I try to print to my Kodak printer grinds to a halt after there first few seconds of starting to print. The printer will print fine from another laptop. It will print test pages and direct photocopies all without a problem. Doesn't matter whether am connected via wireless or USB, the same thing happens. Am thinking I should possibly try to 'downgrade' back to Mavericks - if that is possible.
View 2 Replies View RelatedI am using UPS online, and need to print to a thermal printer for labels.
UPS gave me a Zebra 2844, but I am unable to print to it.
I'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error
"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."
I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.
Any suggestions about what I'm doing wrong, or is there something I'm missing?
I have a networked printer in my home network. I also have a (working) PPTP VPN set up to connect to that home network while on the road. When I open the VPN tunnel, I can adress all devices on the network, including the printer. I can ping it as well as open its Web front end (via Safari). The only thing that doesn't work is: I can't print over the tunnel! I've tried turning on "send all traffic over VPN", but that didn't help. Some research on the web seems to indicate that the solution lies in an option "Exclude Local LAN from Tunnel". This, however, is not an option for the built-in PPTP client in Lion.
Info:
iMac / MacBook, Mac OS X (10.7)
I'm running an HP laser jet 1300 and Lion. My printer will not print some pdf docs.
Info:
iMac, Mac OS X (10.7.4)
I spent several hours trying to get this working. I had managed to make it work like a charm last year but I had to format my mac and I lost my printers... so here we go again.
Office setting (I am at University, that's why we all go out with out own public IPs):
- windows XP computer connecting directly to the internet with its own IP address, we shall say 123.456.789.0
A HP laserjet 4100 printer connected to the windows XP computer, called Printer2
- airport extreme connecting directly to the internet with its own IP address, we shall say 098.765.432.1
- macbook connected to airport. Note that this way macbook and windows are not in the same workgroup.
I made the windows xp share the printer and I added some exceptions to the firewall so that it would accept incoming printing jobs from the airport's IP 098.765.432.1. I downloaded the Laserjet drivers on the mac.
And then, I tried every possible configuration to add the printer. IPP, LPD, Socket, SMB...
I tried putting as a queue just Printer2, I tried putting /printers/Printer2.. I even tried things like username:password@123.456.789.0:port... nothing worked. I just cannot manage to print, and I actually cannot even make the mac recognize the printer.
I remember I once found out what the problem was... but that was long ago and I forgot about it..It even kept working as I switched from an old access point to the airport..
Info:
Mac OS X (10.7.3)
Ever since I upgraded to OS X Lion, I have noticed something different in the print dialogue. First the technical info: I am using a 2009 Mac Mini (4 GB RAM, OS 10.7.3) and I have a couple of printers that I use - one is a Brother laser printer (shared from an iMac, running 10.6.8) and a Canon Pixma Pro 9000, connected via USB to a Time Capsule.
When I hit Command-P to bring up the print sheet, I now get icons on the left hand side of some of the printer names in the printer list. One looks like a road sign - diamond shaped with a walking person in it, and the other is a circle with a wavy line (tilde?) in it. The other printer names have no icons next to them. I gather that the circle-and-tilde means "printer not available" (or something similar) - even though the printer is there!!! And then I wonder why the other printer names have no icons, and I have no clue what the "walking person" sign means.
Info:
Mac mini, Mac OS X (10.7.3), 2.53GHz 2009 w/4GB RAM
I currently have the Lion OS X working on my MacBook Pro and a HP Deskjet F4180 and I can't print in color. What changes do I need to make to enable this feature
Info:
MacBookPro, Mac OS X (10.7.3), Printer worked fine on Snow Leopard
My hp printers will only print b+w over my network. My 9650 is too old I guess there are no drivers from hp but my 6980 has lion drivers.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.7.3)
I have a Canon MP 640 Wireless printer, and have not been able to establish a wireless connection.
Info:
iMac, Mac OS X (10.7.3)
Since downloading OS Lion my ML-1660 laser printer won't print unless I switch it off then switch it back on. It then prints OK. If I want to print another document I have to sw. off and on again. This problem doesn't happen on my Epson RX520 3 in 1 printer.
I've downloaded the latest Samsung driver software but this makes no difference.
Info:
iMac, Mac OS X (10.7.4)
I have recently upgraded to lion MAc os X 10.7 and my samsung laser printer ML1520 will not print any more is anyone got it to work?I have tried different drivers and gostprint but nothing seams to work before bying a new printer I would like to know if anyone has foud a solution
View 4 Replies View RelatedI have a iphone with updated software. I want to print using my Wi-Fi canon pixmas mp640 but it tells me it cannot locate the printer
Info:
iPhone 4, updated operating system
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies View RelatedThe Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
We have OS Lion. When we click on the printer icon, All of the text is huge. If we go to file, print everything prints normally.
Info:
MS Office, Mac OS X (10.7.3)
Here's an interesting problem.
I've got *some* DVD and CD backups that I've made on a PowerBook G4 and an iBook G4. They work fine on the laptops, however when I pop the discs into my intel mac mini the disc comes up as blank and I am prompted to tell the computer what I want to do with it. The discs are not blank.
Other discs (commercial and DVD/CD backup discs) work fine on the mini.
Any ideas as to what may be causing this? (Discs are CD-R and DVD-R, not RWs or +R)
Printer won't print, printer queue won't open?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
