OS X Mavericks :: Unable To Print IPhotos Using HP Printer
Aug 29, 2014
I am using Mac OPS 10.9.4 and iPhoto 9.5.1 systems I have just tried to print photos using an H-P Photosmart 7510 printer and am not getting results because I get a message that the paper size is not correct or the print comes from the regular 8 1/2 by 11 tray and not the photo tray which I have told it to do. I also have an H-P Photosmart 335 printer that I have not been able to use because I get message saying the paper is not the correct size. In the past I was able to adjust easily the paper sizes and get good prints. Now, I am not getting any prints because of error messages. It seems to me that updates installed to my computer change the way I am use to doing therefore causing me to learn new ways of operating the jobs I want to do. It is a waste of my time learning the "improvements" the updates keep installing and not improving the way I have been use to doing various tasks.
I do not print many photos so there is some time between the task and Apple has "improved" the system and I have to go back to square one to learn the new way or install another app.
Info:
iMac (20-inch Mid 2007), OS X Mavericks (10.9.4)
View 1 Replies
ADVERTISEMENT
Dec 27, 2010
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
View 24 Replies
View Related
Feb 15, 2010
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
View 8 Replies
View Related
Aug 23, 2014
My Dell printer will not print documents. It says it is not connected and I have sure west .net as my internet.
View 5 Replies
View Related
Apr 12, 2010
I moved up to the HP P1006 since my 1020 was not compatible with 10.6. It has been working great until a hotel sent me a receipt in pdf format. I open the file try to print from the pdf and from the mac, both ways and I get this:
/usr/libexec/cups/filter/pstoraster failed
I am not a techie, and have no idea what that means. Anyone have an idea?
View 3 Replies
View Related
Aug 28, 2014
That question says it all - old printer (HP) would start when I wanted to print an item; new printer (Canon) doesn't start unless I start it!
Info:
iMac (20-inch Mid 2007), OS X Mavericks (10.9.4)
View 3 Replies
View Related
Jun 19, 2014
In the Print window the option to Print Selection is messing since the Mavericks update. I have only 1 option and that is to ring the whole page. What I am having to do now is copy and paste what I want to print into Text Edit then print.
View 8 Replies
View Related
Feb 7, 2008
I open System Prefs and click 'Print & Fax'. I click + to add a printer. The dialog box opens for a few seconds and then closes. Just that window. I cannot add a printer at all or even print anything for that matter. I ran Printer Therapy and it finds nothing wrong. Same with TechTool Pro. Nothing seems to be wrong except this.
View 6 Replies
View Related
Apr 2, 2010
I hooked it up to my network and everything and the wireless printing works great.
Recently I had to take the printer out, so I unplugged it from my modem and plugged it in somewhere else for USB use.
I tried printing something, forgetting that I couldn't print wirelessly anymore.
View 3 Replies
View Related
Jul 2, 2014
double sided printing on mac. Since I changed to a mac, I havent been able to print double sided from my epson sx425w printer. This can be quite annoying if you a lot of pages to print. The double sided print option is just disabled so I cant even select it and I dont have the option of "Duplexer" or "Duplex Printing" as suggested in other posts. Besides, I've not been able to use my scanner since upgrading to Mavericks-I know others have had similar problems too.
View 2 Replies
View Related
Nov 1, 2009
Well, after sitting on the snow leopard fence for a while, I decided to install it this weekend. I now am unable to print to my Epson Artison 800 printer. Apparently I need a Driver for it, but the Epson site is a bit confusing when trying to select exactly what I need to download.
View 3 Replies
View Related
Jun 5, 2012
I am unable to print using my hp B210 wireless printer from my new macbook pro.
Info:
MacBook Pro, Mac OS X (10.7.4)
View 1 Replies
View Related
Jun 17, 2012
Wireless printing has suddenly stopped working. It worked one minute, then a few minutes later didn't! Is this an OS problem? Using Airport Extreme for wireless and everything has been fine for 4 months with iMac and old Macbook.
Info:
AirPort Extreme 802.11n (5th Gen), Mac OS X (10.7.4)
View 14 Replies
View Related
Dec 7, 2014
Upgraded my iMac (2010) from Mavericks to Yosemite yesterday. Since when, anything I try to print to my Kodak printer grinds to a halt after there first few seconds of starting to print. The printer will print fine from another laptop. It will print test pages and direct photocopies all without a problem. Doesn't matter whether am connected via wireless or USB, the same thing happens. Am thinking I should possibly try to 'downgrade' back to Mavericks - if that is possible.
View 2 Replies
View Related
Apr 22, 2008
I am using UPS online, and need to print to a thermal printer for labels.
UPS gave me a Zebra 2844, but I am unable to print to it.
View 3 Replies
View Related
Jan 17, 2010
I'm trying to get used my first iMac, and I'm having a bit of trouble printing from my wireless network. I have an HP Officejet 6210 that I have been using for the last couple of years with my Windows computer. I'm trying to print off of that through my network, but I keep getting this error
"There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."
I have printer sharing turned on through my Windows computer since the printer is connected directly through my windows computer. My other Windows computer that I have at the house can print through the network, but I'm having problems doing so with my iMac. I have the right driver selected through system preferences/print & fax, but it just won't print.
Any suggestions about what I'm doing wrong, or is there something I'm missing?
View 15 Replies
View Related
Jun 28, 2014
I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer!
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.
View 3 Replies
View Related
Sep 12, 2014
I have the latest iMac - OS X Mavericks. I recently shifted from Windows to iMac. I am a photographer and have thousands of pictures in my external hard-drive (Western Digital) that I have backed up by folder name (YYYY-MM-DD) using windows. But, now I have started using my iMac and planning to backup my new pictures stored in iPhoto library. I am not sure how can get the original pictures by year, month and day from iPhotos and copy them in external drive using the same folder structure - YYYY-MM-DD.
Not sure how to do this simpler. At this time I tried to go to iPhoto, then do Reveal in finder, go to that folder, select all my files, copy them, go to external harddrive, create a folder - YYYY-MM-DD and copy them. I can do this for each hundreds of folder sitting in my iPhoto.
Info:
iMac, OS X Mavericks (10.9.4)
View 5 Replies
View Related
Mar 1, 2010
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies
View Related
Apr 12, 2012
The Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
View 2 Replies
View Related
Apr 1, 2012
I was having problems printing from my Canon LBP6000. Print jobs remained held in the queue. I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement. The printer works fine with my Windows laptop. I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed. I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options. And no idea how to get printer options.
Info:
Mac mini, Mac OS X (10.7.3)
View 1 Replies
View Related
May 12, 2012
Printer won't print, printer queue won't open?
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
View 8 Replies
View Related
Jun 25, 2012
my macbook pro wont connect to the printer properly. sometimes it connects and it prints for a few days but most of the time it wont work. it says that it is connected but when i try to print it says printer offline. how do i connect it to the prtiner permanently?
Info:
MacBook Pro (13-inch Early 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
Jan 1, 2011
Is there a way to force Safari to print what I see on a webpage, and not default to the print style? I'm trying to print a graphically-rich site and the print.css doesn't cut it, making everything look like trash (unformatted text, etc.).
View 1 Replies
View Related
Nov 24, 2010
I'm trying to print an Excel 2004 .xls spreadsheet file where I'm using to record attendance for the class I teach.I have my main Column A with Rows A-X and it shows up fine, I imagine because there is content in the boxes.
But I also have Columns B-L and rows A-X with nothing in their cells, but when I print it, they won't print.I need these blank because I'll check them off if the child in the first column attended the lesson. How do I make it so my many blank cells will print as well?
View 3 Replies
View Related
Jun 29, 2009
i'm trying to print some stuff off using adobe and some parts are printing, but some aren't. I've had this problem before i would print of some formula sheets for my finance class and basically if it wasn't a letter it wouldn't print it off but now it's taking out a lot more.
in the first picture you can see how i went through and wrote the stuff in, wasn't that big of a deal.
second picture is one page from the file that printed out fine
third picture, the entire top part is supposed to have a paragraph on it.
View 2 Replies
View Related
Dec 8, 2009
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
View 11 Replies
View Related
Jun 2, 2006
I've seen previous discussions regarding problems installing a Dell printer. I have a Dell 962 wireless printer. I did find the compatible Mac driver R92834 and I did install the driver. However, when I try to add the printer, I can't find the printer in the drop down list. Am I supposed to be looking for a Lexmark printer? If so, I have no idea what model is equivalent to the Dell 962 AIO. The model sticker is 4409-0d1. A search for this model returns nothing. I'm a newbie with Macs. OS is 10.4.3. Got any ideas?
View 7 Replies
View Related
Oct 29, 2010
Hi, my brand new iMac 21.5" (just 2 weeks old) does not have the appropriate driver for my printer. My printer is a Samsung CLX-3160fn. The iMac has lots of other Samsung drivers, including one that's close (for the 3170 series), but the close one does not work.
Went online to search for driver but was not able to find one for Mac. Does this mean my printer is just not compatible with my iMac?
View 8 Replies
View Related
Nov 8, 2008
I have a iMAC running 10.5.5 and have connected a HP Photosmart C6280 Printer to it via the USB cable. Using Bonjour to connect a XP and a Vista box I get a error saying "ERROR You do not have sufficient access to your computer to connect to the selected printer". I am logged in as the administrator when I do it on the XP or Vista computer and have completed this function on other printer installation before so I know the permissions are there. The software for the printer is loaded on both windows computers.
View 5 Replies
View Related
