OS X V10.6 Snow Leopard :: USB And FireWire Quick Assist?
May 6, 2012
The projector menu indicates that the USB port in the connected MacBook is in the "off" position. I connected the same projector to an older MacBook (Snow Leopard) and it works instantly. Is there a toggle switch in the newer MacBook that I need to activate, or mid-2011 macbook running on OS X Lion no longer support USB connection to a projector? I've downloaded the latest driver from Epson and during install process - there's already a newer version of the driver installed.
I am trying to use my Superdrive with my MacBook Air to copy a DVD movie to an external hard drive? Can someone direct me to an appropriate app or method to achiev this.
Info: MacBook Air, iOS 5.0.1, am trying to copy dvd movies
I just installed snow leopard on my white macbook. I noticed after i did so that every time i turn my computer off and then start or if i just restart my macbook turns on with the volume all the way off. it's not that big of a deal because i can just turn it up, but i would like to know why it's doing that so i can fix the issue. oh yeah i know that if the volume is off when you shut down it will stay that way when you turn it on again. However, even if i shut it down with the volume up it will be muted upon rebooting. any experts out there know a quick fix?
Ever since I upgraded to snow leopard, address book wont sync with Quickbooks.I reistalled QB, but still wont work,even though QB is set to sync addresses?
Even though my MacBook has a built-in iSight, I still use my old external FireWire iSight since I run my MacBook in clamshell mode, and my external monitor doesn't have a built-in webcam. All in all, I love it - it works well, looks good, and I use a nifty gooseneck stand with it that can be repositioned just about anywhere. It was perfect for my needs, and I was never interested in changing webcams. However, after upgrading to 10.6, my external iSight no longer works. I have no idea how to fix this. I know they're old, but has anyone heard whether or not Apple was making them obsolete?
I have Snow Leopard installed on a partition on a Firewire HD, back when my MacBook Pro was also running SN. Since then I have upgraded to Lion. I recently tried to boot from the SN partition on the FW HD, only to get the 3 beep error (which I discovered later means the Mac can't boot from an earlier version than the current OS it's running...)Â
So, I would now like to upgrade the Firewire HD version of OSX from Snow Leopard to Lion [keeping the user folder in place, with docs, apps etc], but the installer says it can't be done. Do I have to erase the partition and do a clean install? It's pretty annoying if I do!Â
Info: MacBook Pro 2.16Ghz Core2Duo 3Gb 15, Mac OS X (10.7), Firewire 800 1tb external disk
I have 2 external FW 400 drives on my late 2011 iMac. I use an 800 to 400 adapter. I've been thinking of getting a new external drive from OWC. The have both 400 and 800. The 800 case has 2 800 connectors and one 400. Does it make sense to mix? Will they all run at the slowest in the chain?Â
I was thinking of connecting the 800 directly to the iMac using the built-in 800 connection. Then chaining from there using the 400 connection to the other existing 400 external drives. Will I actually get 800 speed on the first drive?Â
Info: iMac 3.06 GHz Intel Core i3, Mac OS X (10.6.8), 12GB RAM, iPhone 3gs, iPhone 4s
Quicklook has stopped workingon my MacBook Pro OS 10.6.8. Pressing the space bar on a file yields nothing. Is there a way to update or reset it so it starts working again?
Info: MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
I have a Macbook Pro with an inoperative slot-loading Superdrive. I purchased Snow Leopard today, planning to use my Mac Pro w/working Superdrive in Firewire Target Disk Mode to install the OS on my Macbook Pro. I can mount the Snow Leopard install via TDM, but the installer informs me that I cannot install Snow Leopard from "this volume" (presumably because the Target Disk Mode connection isn't recognized as an optical drive?). I've also tried to use "Remote Install OS X," but because my MBP is not an Air, it doesn't have the necessary firmware to select a network boot on startup by holding Option. Am I out of luck until I get access to a firewire external DVD drive?
I just purchased a LaCie triple interface (500GB disk to use as a bootable external drive to support our family's family of mac's, all running 10.6.8 including a 2006 Core Duo iMac, a 2007 Core2Duo iMac, a Core2Duo Mini, and a 2010 MacBook Pro.Â
The firewire drive does not appear as a bootable option on any of the computers, attached to either of the iMacs via the Firewire 400 port (through a 400 to 800 adaptor), or attached via the Firewire 800 port on the MBP. This is the profile of the LaCie via System Profiler on the iMac?
FireWire Bus:  Maximum Speed:         Up to 400 Mb/sec  Rugged FW USB3:  Manufacturer:         LaCie
My iMac is currently being booted from external disk via Firewire 800. I have to do this until I receive new install disks from apple to resore my machine.
The computer is usable, however internet is very slow... I have other devides, windows machine, ipad, iphone and they all run okay.
It seems that because I have booted via the external disk..... internet is slow. Could this be as the OS is needed to refer to the external disk?
... long time reader, first time poster!! So I'm doing it. I'm switching from PC to Mac. I've been waiting for a while now and the new MacBook Pro's have convinced me. I'm buying the 13 inch this week.
However I'm slightly worried about the upgrade to Snow Leopard in September.
My question is if I buy a new MacBook Pro this week and upgrade from the current version of Leopard to Snow Leopard will it be the EXACT same as the version of Snow Leopard that ships with new MacBooks after September?
Is the upgrade just the same as the full software version available post September? Does the upgrade it just detect if you have the previous software and installs as if it were the full? Or does it just "patch" things depending on what's different from previous versions?
I can wait till after Snow Leopard is released in September 09 if it is different to Leopard upgraded to Snow Leopard.
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
I currently have my second MBP that I got from Macmall and both in a matter of two weeks have had similar issues. The first I managed to get returned and replaced, that is a seperate and complicated story in and of itself. This particular issue started with a boot up sequence that was taking about 5-6 mins. After going through the drill with Applecare thought I could restore using Time Machine. That's when I found out that the FW400 port no longer worked to power my Oyen Digital 250G FW drive. Any thoughts as to what might be the problem? This is my second MBP and Oyen Digital FW drive. I had them both replaced!
I just got a Mac Mini (March 2009 model) and want to connect it via Firewire to my Sony TRV-22 camcoder. The camcorder has a Mini DV Firewire jack on it (I think this is called a 4-pin connector sometimes too). But on the Mac Mini, I can't tell if I need a 6-pin or a 9-pin. Can someone point me to a good cable so I can dump some MiniDV tapes into iMovie?
im trying to install Mac OS X 10.5 on to an external drive. I want to run Leopard off of an External Hard Drive which will connect via Firewire of USB 2.0. I have booted up using the install DVD that i bought a couple years ago to upgrade from Tiger. However each time i install i get an error saying that it cannot be installed. It allows me to start the install and is almost complete before i get this error. I have it partitioned using the Apple Partition Map so i can boot up on a PowerPC computer.
What should i do to install 10.5 on an external drive?
I have a bit of a problem: I cant access my Mac because I lost the password. I recently changed my passwords on several macs, including an old PPC PowerMac G5 from ca 2005. I run 10.5.8 on this and it works flawlessly. I need to use this machine for important work. Â
So this is what I have tried so far:Â
1) Tested with all known passwords I have used in the past.
2) Tried to boot from a 10.6 install DVD
3) Tried to boot from just C and later Command C
4) Tried a different install DVD 10.4Â (I dont have the original 10.5 DVD)
5) Tried to use T and Target Disk Mode from an iMac with Lion. (disconnected all other FW disks etc.)
6) Tried different Firewire cables
7) Tried different Firewire connections.Â
It starts obediently and show every sign of Mac-Happiness. But I simply can't get the darn thing to boot. I think it normally should have booted using 10.6? Â
I understand this particular issue has been discussed at length on this forum and in other places but none of the solutions have yielded any success for me and I see this is often the case for others. So, I'm posting the question again in hopes that there is an Apple guru out there who has figured this one out. (All relevant specs below.)Â
Problem: Firewire port was working fine for downloading video from a Panasonic PV-GS320 into iMovie 8.0 on an iMac 10.5.8. Then, suddenly the firewire port was no longer recognized: FireWire Bus: Warning:Unable to list FireWire devices. Maximum Speed: Up to 800 Mb/sec The problem cannot be with the camera or cable as I can swap them over to an iBook 10.4 and the camera and firewire download perfectly there. I have run AHT. Test results show no hardware problems. I've tried all of these
"Photoshop CS" and "Acrobat 6.0 Standard" suddenly stopped working in my iMac, apparently after I upgraded it to MacOS 10.6.8 (the latest version of Snow Leopard). Both programs had worked normally until that OS upgrade. I deleted Photoshop CS and tried to re-install it from the original CD, but the installation never proceeds because I get an error message entitled: "Install Adobe Photoshop CS quit unexpectedly". This is the full error message:Â
Process:Â Â Â Â Â Â Â Â LaunchCFMApp [1516] Path:Â Â Â Â Â Â Â Â Â Â Â /Volumes/Adobe(R) Photoshop(R) CS/Adobe(R) Photoshop(R) CS/Install Adobe Photoshop CS.app/Contents/MacOS/Install Adobe Photoshop CS Identifier:Â Â Â Â Â com.MindVision.InstallerVISE
Today I performed a clean install of Snow Leopard on my late 2009 Mac Mini. After completing the installation, I began running software update to bring everything up-to-date.While software update did find and install a number of updates (10.6.8v1.1 Combo update, Security Update 2012-002, Apple Software Installer Update, iLife Support 9.0.4, Remote Desktop Client Update 3.5.3, Airport Utility, Java, Safari) it did not find an update for iTunes (which starts at version 9.x, I believe, in a SL clean install).I assumed that this was some sort of random glitch and manually downloaded and installed iTunes 10.6.3.After that, I re-installed iLife '11 (from a retail DVD, not the App Store).When I ran Software Update again, it found updates for Garage Band, iDVD, and iWeb, but it did not show the updates for iPhoto and iMovie.I found this to be unnerving, as I performed a clean install when I first obtained this Mini a few months ago and didn't experience any of these problems - all of my Apple software updated automatically through Software Update without a hitch.
I began researching this problem online and found that other people have been experiencing this same problem (or some variation of it), and it seems like it began appearing around the time Apple updated some of its security certificates in March.In particular, I've found several references to the missing iPhoto update.This one is especially noticeable because an iPhoto library created in iPhoto 9.2.3 will not open in iPhoto 9.0, and this generates an error upon opening the program (i.e., a user backs up their iPhoto library created in 9.2.3, performs a SL clean install, reinstalls iLife, goes through the Software Update process until it shows that no more updates are available, and are shocked to find that they are unable to open their backed up iPhoto library because they have an out of date version of iPhoto).The most common (and admittedly logical) solution proposed in the threads I've read is to download any necessary updates directly from the Apple website. However, I am curious as to why this previously functional feature now appears to be broken.Has anyone else been struggling with this? Does it indeed have something to do with the new security certificates? Is Apple aware of the problem?
I googled it and it didn't help out as much. I have this Shure Mic and it has MIDI input and would like to have some kind of adapter to firewire. I know there is an USB adapter, but i would like to use firewire. It can be firewire 400 or 800. I like to record some songs for GarageBand.
I'm currently using a MBP 13 inch and am running Leopard on it.
I just bought a copy of snow leopard today but i don't know if I should do a direct upgrade from leopard to snow leopard, or wipe my MBP and do a fresh install so i have snow leopard on a clean slate.
Have any of you tried the second option before? Or do any of you have advice on which path I should take?
I have my drive partitioned between Tiger and Snow Leopard. I am trying to move myself over to Snow Leopard so I don't have to keep switching. The problem is that my old apps that alledgedly will work in SL, give me an error box when I launch them. It happens with Appleworks 6 and Quicken 2007. I've installed Rosetta but don't know what else to do.When I launch either application, it says it unexpectedly quit and gives this info:Â Process: [code]
I have a 1Ghz PowerPC G4 iMac and want to delete everything and start again with Leopard. (it seems to be within the system reqs.) Problem is the DVD drive isn't functioning properly. It sees the OSX DVD but won't boot from it. Question - What's the best alternative method? Create a boot firewire disk?
