My MBP(#1) is stuck in grey screen. I've tried 4 or 5 of the steps suggested to get the computer to boot up. I used Target Disk Mode to copy hard disk files to my other MBP(#2), then inserted the Mac OSX install disk, then turned off the MBP(#1) and restarted with the C key held down. Instead of getting the OSX installation, it remained grey and gave me repeating 3-beeping sounds. What does this mean?
I have had a string of bad luck with my mac, a couple of days ago the screen started flickering and my mac froze (could still move trackpad mouse, not click). It started up fine again.. It did this a couple times more (had to restart pressing power button). Then it froze evereytime I put the power cable in it. I solved this problem with an PRAM reset.
But now it still freezes up, the screen will start flickering and i can only move the mouse. When i try to reboot it gets stuck on the grey screen. only once every 20 times Ill get into the os.
I have tried a pram reset, holding the power button, safe mode, hardware test (no probs found), starting up without external devices.
It wont boot from the cd if it is stuck on the grey screen...
Could someone may be tell me what to do? thinking about bringing it to the store tomorrow .
I have a mac pro running 10.6.6. Occaisionally startup gets stuck at a grey screen and requires a hard reboot or two. I've not found any correlation between what is plugged into the mac or not plugged in and the successful or unsuccessful startup. It just appears random. I've begun studying the console for anything that might indicate what's going on when this happens. One thing I notice is the following line: 2/2/12 8:37:31 AMcom.apple.launchd.peruser.501[134](com.apple.FolderActions.folders) Path monitoring failed on "/Volumes/LittleWet_02/SFX_aiff": No such file or directory
This line was the last line in the console before the hard reboot a few times, suggesting it might be the culprit. The volume it is looking for is an external HD that was connected to this computer once almost a year ago and never again. I can't determine what startup process is looking for that SFX_aiff directory, or why. Is there any way to tell this system to cease looking for that volume upon startup?
My Snow leopard machine hangs during startup at the screen with the Grey Apple logo. It appears there is a SW issue with my OS X boot partition. Here are facts I have learned:The computer boots fine if I hold option at startup and select my boot camp partitionThe compute boots fine if I attach an external HD with OS X 10.6Running a disk repair from the external HD, I see the following two issues that are repaired. Also, note the last line about boot partitionsAfter this disk repair, the disk will still not boot, it hangs at the Grey Apple logo.Booting in safe mode does not resolve the issue, the machine will still not boot to a desktopBooting in Verbose mode, drivers initialize with the last succesful line being the ethernet drives (I believe) and then the hangup occurs. It is unclear what state the boot process is at on the hangup.
This situation has happen twice in the past few weeks. The first time I did a reinstall of OS X to resolve the issue. Then, the issue appeared again approximately two weeks later. I'm hoping to avoid a second reinstall (And really, avoid this issue in the future). It seems perhaps something in the boot partition table or the OS partition, although disk utility says the partition is fine. I have downloaded Test Disk 6.13 to look at the partition table, but I don't know how to interpret the outputs of that program.
Info: MacBook Pro (15-inch Core 2 Duo), Mac OS X (10.6.3), 2 GB RAM, Boot Camp, Ex HD avail
So out of nowhere my unibody MBP (specs, etc below) locked up yesterday while I was watching a video using VLC. It stopped responding to anything so I held down the power button until it turned off. I waited about 10 minutes and turned it back on. Grey screen with spinning cog showed up for about a minute and then kernel panic. Held down power button until it turned off. Tried repeatedly - same results. Won't boot into Safe Mode - still get a kernel panic everytime. It will let me boot the machine into Target Disk Mode. It will boot from my Snow Leopard install disk where I ran Disk Utility and "repaired disk" and "repaired disk permissions" on both the drive and the volume. All the "repair disk" and "repair disk permissions" ended with messages in green type saying that the disk/permissions appear to be OK.
I have an external FW drive used for TM backups for the machine. A fair amount of data has been added since the last TM backup (which was less than 30 days ago) that, ideally, I'd like to not lose by resorting to restoring from a TM backup. It's not the end of the world if the last (roughly) 30 days of data/changes ends up being lost, but I'm willing to work on getting it back up and running without doing an erase and install and then restoring from a TM backup if at all possible.
Definitely if any other information or data is needed from me in order for anyone to assist, please let me know what it is and I'll do my best to provide it.
Hardware Overview:Model Name: MacBook ProModel Identifier: MacBookPro5,1Processor Name: Intel Core 2 DuoProcessor Speed: 2.66 GHzNumber of Processors: 1Total Number Of Cores: 2L2 Cache: 6 MBMemory: 4 GBBus Speed: 1.07 GHzBoot ROM Version: MBP51.007E.B06SMC Version (system): 1.41f2
I put a new hard drive into my iMac 24". I could not install OS X because every time I turned the machine on it would shut down in less than a minute at the grey screen and Apple logo - whether the disk was in the slot or not. I finally was able to install Snow Leopard via firewire from a Macbook Pro. It runs fine - but I can only access the iMac Snow Leopard installation from the Macbook Pro. When I turn on the iMac, it still shuts down every time. The new drive was formatted with the Disk Utility as an external drive - since I couldn't get to it while it was in the iMac. My Snow Leopard disk was a full version, not an upgrade.
I have a HITACHI touro desk 3TB external hard dive connected to my iMac OS X version 10.6.8 Every time i start up the system it stays on a grey screen until I unplug the usb of the external hard drive then the system boots up normally. I have tried connecting different usb cables, plug in to different usb ports, and nothing works. I have other external hard drives and they don't give me any problems. is a pain plugging and unplugging the usb cable.
everytime I try to boot my iMac it gets stuck at the first grey screen. No logo, no loader, nothing but a grey screen. I have tried everything here > http://support.apple.com/kb/TS2570 > with no results. The grey screen remains there, with no changes. The only thing that seems to work, but only for a seconds, is holding the option (alt) key at startup. After a few seconds, the pointer of the mouse appears.
I put the install disc in and went threw the windows, it started installing so I left it for a while, when I come back it has the gray apple and the spiny boot up screen, I thought no problem its just restarting after the install. Now its been like this for almost an hour. Anyone have any ideas, I'm afraid to push the power button fearing it might screw up the install.
My 24" iMac has crashed and has a CD stuck in the drive. The Mac continuously reboots but never makes it beyond a blank grey screen. I do have my OS CD and I have an external time machine backup, but I can't get to a terminal prompt to do anything. I've tried all the usual suspects for getting the CD out - and there is only one CD in the drive.
I've tried holding the mouse button down, pressing the eject button on the keyboard (I tried pressing eject on both a wireless and a wired keyboard). I also tried holding command-S to boot into single-user mode which didn't work. There is no pinhole on the CD to physically eject the CD and I understand that there's no way to boot from the Time Machine. I believe that not being able to remove the CD is hindering my ability to restore and boot into single-user mode.
I am currently stuck on the grey screen of death with the flashing ? file folder.I have tried resetting the pram etc. and when i boot from my snow leopard disk the disk utility does not recognize my HD. Is there anything else I can do to fix this? Or try?
My iMac ran a software update last night, but the program kicked out before it completed. When I went to reboot this morning, I had the Mac icon on a grey screen, with a little line rolling around in a circle below it. It's been hung up there all day.
I've read in other posts that I should do a clean install of the system software. Problem is, my hard drive is absolutely packed and the computer is telling me that I don't have enough space to do even a baisc installation without all the bells and whistles. Because the machine won't boot, I can't get into the drive to transfer or delete any files in order to create the necessary space for the installation.
My Mac Pro started having issues about 2 weeks ago. The screen would go blue every now and again for about 3 seconds and then go back to normal. It kept doing this off and on.
Two days ago the Mac Pro started making a buzzing/humming sound, loud enough to hear in the other room.
I shut it down and tried to fire it back up and it began making a clicking noise, then the humming came back. The screen froze at the grey screen and did not show the white loading wheel.
I've swapped out the drives and still the same.
The Mac is about 2.5 yrs old and I use it for video editing (FCP) and photo editing (Adobe CS3). I've never had any issues until now.
About two weeks ago I'm using my snow leopard partition of my macbook pro and browsing the internet via firefox. My mouse freezes for a second, and then my computer just shuts down. I power back up my macbook pro to find a 'cancel or prohibitory symbol'. Strange thing is I can hold down option and boot into my windows partition no problem I go through all the motions suggested by the apple website, such as resetting the PRAM etc.. Nothing works. Flash forward to today. I finally get a hold of my snow leopard installation disc and boot my macbook with it. I run the disk utility and it finds that my hard drive's good to go.
I read online and it seems that the best option would be to install snow leopard again. I decide install it again, but about halfway through the installation, the installation fails and pretty much freezes. I had to shut down the macbook via the power button. Now, whenever I try to boot up my macbook I hear the chime, but nothing happens after that. I am just left with a grey screen. I cannot enter safe mode, single user mode, and when I try to choose the start up disk by holding down option, the arrow pops up to choose which disk to pick, but there are no disks to choose from.
I am trying to reformat my Macbook pro. I run the reinstall disc. When I type in my user name and password then click restart, the system reboots but get stuck on a grey screen. You hear the cd spinning for a minute or so but then it goes off. Do I have a bad disk(doesn't appear to be scratched anywhere) or am I not being patience enough.
So yesterday i turned my laptop on to find out it wasnt booting up past the grey screen. Later on i did some trouble shooting and finally got it past to the main desktop screen. Now, recently i had just uninstalled and deleted my Windows 7 Pro partition i had put onto my laptop a while back but when doing so, when i tried getting my hard drive back to full storage amount by deleting the partition,it gave me some error. I believe i figured out the error and was able to use my laptop from then. Once my computer was letting me get to the desktop screen, once i would click on an app it would often give me the pin wheel and stop me from clicking on anything else for a good minute.
Today,i had backed everything up and thought that i would just reformat and re install OSX to remedy the whole issue. This was not acheived. I had been able to get to the desktop screen a few times but still got the pin wheel situation going on. A couple tries later im stuck here at my grey boot screen. No Apple sign showing up, just stuck. Im usually a very computer savey person but this is kind of just making me wonder. I ordered a new hard drive (which i was going to upgrade anyways)but wanted to know if this even could possibly be the issue. I upgraded from my stock hard drive about 6 months after i had gotten my laptop (mid 2009 model). The last 3 years ive been traveling very often, flying frequently and using it often for playing my DJ gigs. Im wondering if alltitude and hot clubs could take a tole on a hard drive when its running hot?
Info: MacBook Pro, Mac OS X (10.6.8), 2.2 C2D,8GB RAM,320GB WD 7200RPM HD
I just tried to update my 2008 Macbook from Leopard to Snow Leopard. Install went fine but all of the sudden I got an error message, accompanied big yellow triangle with a black exclamation mark telling me that the install has failed without any further info. I rebooted and Snow Leopard was trying to install again. I thought 'why not' and continued. Then, when I had to pick a disk to install on, my Macbook harddrive couldn't be found. I thought 'screw this I'll stick to Leopard' and rebooted. After that it just stuck on the grey screen with the Apple and the loading animation. How I can fix this or at least save my files?
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
So all of the sudden my mbp will not boot past the spinning wheel/apple screen. I have not let it try for longer than 15 minutes but I don't see the point. I tried to boot in safe mode(hold down shift) but the bar only went to about 1/3 and stopped/disappeared...so I don't know what to do. This shouldn't be happening after a couple months of light use.
Just for extra info:
I am able to boot into windows 7 via boot camp. Cannot boot from cd or go into safe mode.
24" imac. leopard system. the system was frozen (which was the first time in two years) a couple of days ago, so i turned the power off to reboot the system. then it's stuck at the grey screen. to make it worse, i have a dvd inserted in the drive. please tell me what seems to be the problem and how to solve it.
Macbook Pro was purchased in mid-late 2009 and is running on OS X 10.6. Today is suddenly stopped responding and so I turned it off. When I turned it back on it opend to the grey screen with the Apple logo and the loading icon and that is where it stayed. I have been searching for the answer on different forums but have yet to find a solution. My hard drive is appearing in the Disk Utility but not in the box when I try to reinstall OS X.
Turn on Mac goes to grey apple screen cog wheels spins but its stuck there tried control option p and r doesn't do anything tried turning it on while holding shift key to try and get it in safe mode but that does not work either.
