I have an HP Photosmart printer connected, via USB, to a PowerPC Mac. The Mac has Bonjour on it and it acts as a print server to a Mac laptop and a Dell laptop. Until recently, everything was working fine. Now, however, when I try to print from the Dell laptop, I get a pstopdffilter error message. I can still print from the Mac laptop. Any thoughts?
View 5 RepliesBoth the mac and HP Photo printer are online. My printer is listed but when I print I get: The printer is not responding or the printer might not exist.
Info:
MacBook Air
I have an HP Photosmart printer connected, via USB, to a PowerPC Mac. The Mac has Bonjour on it and it acts as a print server to a Mac laptop and a Dell laptop. Until recently, everything was working fine. Now, however, when I try to print from the Dell laptop, I get a pstopdffilter error message. I can still print from the Mac laptop.
View 1 Replies View RelatedError message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac.
View 7 Replies View RelatedI am not a mac user (please forgive me) but I have a friend who has a Mac and cannot print all of a sudden. From what I understand it is an I-Mac and the OS is OSX.
All of a sudden (after a few years without trouble) she is getting an out of memory message when she sends a job to the printer. Further, no jobs show up in the printer dialogue window when it is sent from the computer. The print jobs are not large, just simple emails. Even when she creates a blank message with the word test in the body it still wont print.
The printer is an HP D4160.
It is not sending any messages re: the status of the cartridges. The computer is communicating with the printer as it will print a test page when commanded to from the computer so this is truly baffling.
Any thoughts would be appreciated.
I've got two printers - one at work and one at home. They're both HP, if that's any help. When I try to print to either of them - either connected on USB at home, or over the network at work, the document seems to spool ok - (the printer icon appears is doc), but then it never prints.
If you open the Job queue for the printer, the job is listed there with a status of "error". I can't seem to find any more useful info - sorry. Feel free to ask me for stuff if it'll help you help me. The printer is detected as online - it says Printer Ready in the box. I can post screenshots if it'll help.
I am trying to burn a 4.2 GB project in iDVD. My project is saved onto an external hard drive, and when I start it burning, I get an error message that says "Not enough free disk space for encoding the remaining assets." It says I only have 825 MB available on my hard drive and 3.362 are needed for encoding, but I actually have 786 GB free! Any idea what could be causing this?
View 4 Replies View Relatederror msg: Unable to complete backup. An error occurred while creating the backup directory. - What can I do to fix this? I tried restarting.
Info:
Time Machine, Mac OS X (10.5.8)
After pressing the iPhoto icon, the software seems to be turning on but later an error message appears and I am unable to access iPhoto. I tried moving the .plist for iPhoto to Trash but this did not work.
Info:
iMac, Mac OS X (10.7)
I'm getting a "filter failed. 1 page " error while trying to print using a NEW Mitsubishi CP9550 printer. Since its a photo printer and claims to be Mac compatible I expected no issues. I have tried loading the driver (from Mitsubishi) a couple of times without success.
Info:
MacBook Pro (15-inch Early 2011), OS X Mavericks (10.9.4), Printer: Mitsubishi CP 9550 CW
Live functioning printer (Epson Stylist 9400FAX) stopped working with the error message
" Stopped – 'Filter' failed, 1 page" in the queue.
Info:
iMac, OS X Mavericks (10.9.4), iMAC3.2Ghz Core I5 24Gb RAM 3Gb F
I have a little problem with one of my applications. The application is very important for me and I need it nearly every day. But now it shows my an error message. 'JVM terminated. Exit code=-1' [...]
I'm using Mac OS X 10.6.4 and my system is up to date.
iMAC with OSX10.9.4 ; 8GB ram ; two partitions external disk formatted MAC jurnaled ; connected via Fire Wire or USB2 .
During Backup the sistem get stack and display into the "details window" Time machine was unable to complete the backup because unable to complete the backup folder.
This problem happens with USB and Fire Wire. The file backups.backupdb is excluded from virus scanning.
Also happens time to time that (without doing things) both the partitions of the external disk disappaire from the desk-top and a message "the disk must be ejected properly" is displayed.
This two problems are independent une to the other. I have change the backup disk but both the problems persist.
Info:
iMac, OS X Mavericks (10.9.4), 8GB ram ; external backup HD
Does anybody know of any effective free spam filtering software for OSX Leopard...? Am running Entourage 2008 as my email client.
View 6 Replies View RelatedI'm trying to create a Smart Folder (OSX Mavericks) that selects files contained in a specific folder.
If I add a filter as "Document container" with any operator (starts with, contains, is, etc.) the search results is 0 files.
Info:
iMac, OS X Mavericks (10.9.4)
Is there a way to force Safari to print what I see on a webpage, and not default to the print style? I'm trying to print a graphically-rich site and the print.css doesn't cut it, making everything look like trash (unformatted text, etc.).
View 1 Replies View RelatedWhenever i try to send an email in entourage i get the error message error-17982.
View 1 Replies View RelatedI'm trying to print an Excel 2004 .xls spreadsheet file where I'm using to record attendance for the class I teach.I have my main Column A with Rows A-X and it shows up fine, I imagine because there is content in the boxes.
But I also have Columns B-L and rows A-X with nothing in their cells, but when I print it, they won't print.I need these blank because I'll check them off if the child in the first column attended the lesson. How do I make it so my many blank cells will print as well?
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I just downloaded Magnifique 2.1 for my Mac (Macbook, 13-inch, 2 gigs of RAM, Mac OS X 10.5). As soon as I open the application, I get an error message saying this:
Applescript Error
System Events got an error: Some data was the wrong type. (-1703)
The downloadable theme gallery won't show as well. This same message appears if I try to search for any themes and appears every time I type a letter or two into the search bar in the application. Is there any way to fix this? I have tried re-installation but it doesn't work.
i'm trying to print some stuff off using adobe and some parts are printing, but some aren't. I've had this problem before i would print of some formula sheets for my finance class and basically if it wasn't a letter it wouldn't print it off but now it's taking out a lot more.
in the first picture you can see how i went through and wrote the stuff in, wasn't that big of a deal.
second picture is one page from the file that printed out fine
third picture, the entire top part is supposed to have a paragraph on it.
i have a HP colorlaserjet 2840 (network)printer connected (fixed ip adres, cable) to a router. Have a windows laptop and an ibook (macOsX tiger) connected wireless to the router. Can print fine from the windows laptop to the printer. Internet and email work fine on both the laptop and ibook.
Can anybody tell me how i can get the ibook to print (wireless) to the printer. I allready downloaded the driver from the HP site and try to add the printer through Ip printing. This appaers to have gone allright but when i try to print nothing happens, I don't see a printjob in the cue.
Is there any thing available that will allow me to print to a PDF file? I'm trying to export something to a PDF file that does not have the feature as standard. I know it can be done in Windows as there are a few Print to PDF applications. but I can't find a Mac one.
View 2 Replies View RelatedThe message-printer is offline" keeps showing when I try to print.
Info:
MacBook Pro, Mac OS X (10.7.4)
When I was trying to choose print message from action menu from my .mac account, it is not opening a new window, for this reason I cannot print any message through safari. Knowing that when I tried to use the Firefox, it worked normally.
View 2 Replies View RelatedI can't get my Outlook to print a list of attachments when I print a message.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I have a Canon Pixma MP620. It used to work fine but now when i try to print i get error number 306. How can i fix this? Setting up the wireless setting the first time took hours so i would like to avoid doing that all over again if i can.
View 1 Replies View RelatedSince yesterday, I've been getting this strange error message when opening Mail. It happens on my two Macs at home as well as my Mac at work.
View 8 Replies View RelatedI cannot put anything into my trash bin, if I try I get the following messageThe destination mailbox ?Trash - (my e-mail address)? does not allow messages to be moved to it.To the best of my knowledge I have not altered anything to cause this message to pop up.If I create another Trash folder I can put unwanted mail into it and delete it, but I have to drag and drop every unwanted mail into the new trash bin first before emptying it which is a PITA!
View 4 Replies View Related