I have a Canon Pixma MP620. It used to work fine but now when i try to print i get error number 306. How can i fix this? Setting up the wireless setting the first time took hours so i would like to avoid doing that all over again if i can.
View 1 Replies
I have a Canon 780 installed which seemed to print fine for a while, but now when I try to print I get:Error Number : 306 A communication error has occurred. Make sure that the printer is plugged in, powered-on, and properly connected to your computer. Then try printing again.The printer is connected via a USB Hub, but plugging it directly into the USB Port doesn't seem to help either. I've also made sure I "woke up" the printer, plugged, replugged, etc.If I mess around plugging and unplugging, it eventually will work.
View 2 Replies View RelatedI added a friend to my contact list and wanted to send him an imessage. I got the error this number is unregistered. How can I register his number so I can imessage him?
Info:
iMac, OS X Mavericks (10.9.3)
I just opened a FC project in 6.0 from an XML file for the first time. The project originally came from 6.0.6 and I was happy to see that this kind of reversion was actually possible. Unfortunatly after doing a little work I started getting "general error" messages whenever I tried to save the project or render any transitions.
If I remeber correctly, I opened the XML and was asked to save a new project. I saved the project and started working. I dont remeber if any saves or rendering had worked in the new project before I got the error messages. Maybe none of them worked, I am not sure.
I recently ran a ‘verify’ scan in Disk Utility as a precaution after Word crashed. An ‘incorrect number of file links’ error message showed up, as well as a prompt to repair this using Disk Utility from the Recovery HD. However, when I do a scan from the Recovery HD version of Disk Utility, no error messages or repair prompts appear.
My questions… Is this something to be concerned about? How can it be fixed? Would it be best to do a clean install of OSX? I only lost a little bit of data so I was pretty lucky.
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1), Disk Utility
Both the mac and HP Photo printer are online. My printer is listed but when I print I get: The printer is not responding or the printer might not exist.
Info:
MacBook Air
I've got two printers - one at work and one at home. They're both HP, if that's any help. When I try to print to either of them - either connected on USB at home, or over the network at work, the document seems to spool ok - (the printer icon appears is doc), but then it never prints.
If you open the Job queue for the printer, the job is listed there with a status of "error". I can't seem to find any more useful info - sorry. Feel free to ask me for stuff if it'll help you help me. The printer is detected as online - it says Printer Ready in the box. I can post screenshots if it'll help.
Been using Print Therapy but problem still unsolved.Â
Mac OS 10.6.8
Printer HP Laserjet CM1415fn
Info:
iMac (27-inch Mid 2010), Mac OS X (10.6.8)
I have an HP Photosmart printer connected, via USB, to a PowerPC Mac. The Mac has Bonjour on it and it acts as a print server to a Mac laptop and a Dell laptop. Until recently, everything was working fine. Now, however, when I try to print from the Dell laptop, I get a pstopdffilter error message. I can still print from the Mac laptop. Any thoughts?
View 5 Replies View RelatedI have a HP Officejet 6210 plugged in to my Windows machine, and set for sharing.My other Windows machine can print to the networked printer, but my iMac cannot.I have the latest driver available on my iMac for my printer and I can "find" the printer, but when I print I'll get an error "There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or stop the job and try again."
When connected directly to the iMac it will print, and my Windows computer can see the printer, but I cannot select the printer to use.I spoke with Apple Support and they couldn't help me out. They said my best bet was to purchase the Airport Express. I don't want to go out and spend 100.00 for the airport express...there has to be something else.
I have recently upgraded from Snow Leopard to Mavericks and am now having problem with my hp 4500 office jet printer. The print icon tends to stay on the dock after the print job is done and then mess up the print queue. Even worse if I forget to cancel it manually then when I put the computer on 'sleep' the printer starts up again and the whole job is rerun unless I get to cancel it quickly on the printer! Â
It does not always do this (the print icon disappearing as it should do), but for 90% of the time it does.Â
Error message when I try to print: unsupported document-format"application/vnd.cups-command". I recently had my hard drive replaced in my early 2010 21" iMac.
View 7 Replies View Related-OSxÂ
-Processor: 2.4 GHz Intel Core i5
-Memory 4GBÂ
Only the number keys on my keyboard are malfunctioning besides the number 0. For example when I press 1 it appears as q1. When I press 2 it appears as w2. Â
I am not sure if I accidentally pressed something on my keyboard that has changed the functioning of my number keys. I've tried fidgeting with the keyboard settings in System Preferences and holding down the f6 key but nothing has worked.Â
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Does the logic board serial number match the computer serial number?
My reason for asking is that 4 months ago my sisters G5 17" logic board supposedly got replaced with a new or refurbished logic board but it seems by the workmanship of the board something fishy is going on.
Is there a way to force Safari to print what I see on a webpage, and not default to the print style? I'm trying to print a graphically-rich site and the print.css doesn't cut it, making everything look like trash (unformatted text, etc.).
View 1 Replies View RelatedWhen I print multiple checks they print in the wrong sequence. If I have checks 401, 402 and 403 in the printer in that order, they print 403, 402 and 401. How can I change this to print not collated?
Info:
Mac Pro, Mac OS X (10.7.4)
I'm trying to print an Excel 2004 .xls spreadsheet file where I'm using to record attendance for the class I teach.I have my main Column A with Rows A-X and it shows up fine, I imagine because there is content in the boxes.
But I also have Columns B-L and rows A-X with nothing in their cells, but when I print it, they won't print.I need these blank because I'll check them off if the child in the first column attended the lesson. How do I make it so my many blank cells will print as well?
I have had difficulty in attaching my HP Photosmart C5580 printer to my new MacBookPro (OSX 10.6) through my Netgear WGPS606 print server. After much searching I found previous posts here which advised me to add the Gutenprint driver 5.2.6 which I did. That finally DID successfully attach the printer through the server.
However, there is a lag of many seconds (sometimes minutes) between the SEND command and the starting of the printer. Is this the new normal that I need to expect or is there a fix?
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm new to Mac OS X, but have been working with Linux for almost 9 yrs now. I have set up a Linux box with CUPS 1.3.9. I can print from the server, and from other Linux stations to that remote server. However, I can't print from a client MacBook.
I set up CUPS on the client Mac via http://localhost:631 and created a printer associated with the remote queue / printer on Linux (the URL I use on OS X is http://mylinuxserver:631/printers/hpprinter and the driver is RAW).
I have no problems sending a test page from the CUPS web interface on Mac OS X to the Linux server -- the test page gets printed OK. However, I can't see the printer I just defined from other Mac OS X apps, and neither can I see it from the Add Printer Dialog on System Preferences (it's empty).
I tried creating the printer at the Add Printer dialog, but it would neither let me specify an HTTP URL (as far as I know, I had to use the IP icon on the toolbar) nor specify "RAW". So I tried creating a "dummy" printer in the Add Printer dialog, with a basic config, and then changing it from the CUPS web GUI. This didn't work either, since when I went back to the Add Printer dialog, the printer was gone.
I'm using a MacBook, Mac OS 10.5.8. I've downloaded the driver for HP LaserJet m1319f MFP and the printer worked fine when I connect it directly to my MacBook (using USB connection).The problem is that printer is supposed to be connected to our office network users through a TP-Link Print Server (TL-PS110U). I've tried to use AppleTalk to connect to that print server but my MacBook only recognized that HP printer as a HP Fax machine and I can't print anything.
View 6 Replies View RelatedThe Excel program I'm trying to print Excel 2008, Microsoft Office 2008, identifies the problem as a 'driver' issu and thus will not print the spreadsheets.
Info:
iMac, Mac OS9.1.x
i'm trying to print some stuff off using adobe and some parts are printing, but some aren't. I've had this problem before i would print of some formula sheets for my finance class and basically if it wasn't a letter it wouldn't print it off but now it's taking out a lot more.
in the first picture you can see how i went through and wrote the stuff in, wasn't that big of a deal.
second picture is one page from the file that printed out fine
third picture, the entire top part is supposed to have a paragraph on it.
I'm trying to empty the trash on my iMac (running Snow Leopard) but I just get an error message: The operation can’t be completed because an unexpected error occurred (error code - 8003).Â
Info:
Mac OS X (10.6.8)
Is there any thing available that will allow me to print to a PDF file? I'm trying to export something to a PDF file that does not have the feature as standard. I know it can be done in Windows as there are a few Print to PDF applications. but I can't find a Mac one.
View 2 Replies View RelatedWhenever I hit the right or up arrow key on my macbook, it does shift either right or up but it also type either the number "8" for the right arrow key or the number "9" for the up key. How do I get this to stop?
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I have done this a million times before, making me wonder if there is a limit to the number of photos that you can have in your library?(Currently, 24,637 photos) System: just upgraded to iLife '09Mac Version 10.5.6 Same camera, same process...
But won't import photos as it says there are issues writing to my iPhoto library.
I am getting this error "The operation can’t be completed because an unexpected error occurred (error code -50)." when I try to transfer files from my Mac Mini to my External Harddrive which is connected to my Airport Extreme. " The error does not appear to happen all the time. It does seem consistent if I am transfering files and then try to transfer more.  Â
The files I am transferring are .mp4. It does not appear to care about the size of the file, it happens with small files and large files, I can transfer some large folders (2.54G). I can connect the hard-drive externally directly to the mac mini and it will transfer any file.
I am receiving an error 5.5.4 "Invalid Email address error code 17099 indicating that mail could not be sent for Account name: "Msn". I have recently moved from a PC laptop and have been sent email messages to this account on my iMac successfully for several weeks. The email address in question is actively sending and receiving messages. I can receive email from that account.
Info:
iMac, Mac OS X (10.7.4)
Whenever i try to send an email in entourage i get the error message error-17982.
View 1 Replies View Related
