I am using mac OS X 10.6, during the time to create a installation disk using disk utility by mistake I have selected my partition drive and after that I couldn't find any data in that drive, how to get it back data.
Info:
iMac, Mac OS X (10.6)
I tried to install Ubuntu (don't ask me why) onto my G5 dual core 2.5 Ghz PowerPC and after the installation not working as I had hoped (it worked fine on my netbook btw) I switched off the mac using a hard-shutdown from the power button as the whole system became completely unresponsive. I then tried to reboot and found that on my reboot rather than booting into the user screen as per usual I got the dreaded "circle with a cross through it". After fiddling about with a hell of alot of boot options I managed to get into the open firmware (option,o,f) terminal style screen up. from this screen it would seem that on my internal hard drive that pretty much all of my files are still on the hard drive. As I couldn't open them from the open firmware I was then told by a friend that I could run disk utility from the install cd provided with mac os x and I managed to find my internal hard drive using disk utility.
It seems as though during the ubuntu install I've deleted all partitions on the hard drive and therefore on the "partition" section under "current" it has no partitions set up and I have the option to set one up. It also gives me various different formating options; Mac os x Extended, Mac os x Extended (journalled), Mac os x Extended (Case sensitive journalled), Mac os x Extended (Case sensitive), unix file system and free space. I think it was originally on Mac os x Extended (journaled) but I'm not certain. Before I hit that re-partition button do u think that this is the right thing to do and if so which formatting option should I use? Presuming that the re-partitioning goes well, will I then have to re-install os x? Also will I loose all the data on the hard drive? Although I have the vast majority backed up there are still a few odd files that I wouldn't mind keeping if at all possible and obviously I didn't think to back up those hundreds of apps I've acquired over the years.
An embarrassed Dc
Power Mac G5 dual-core at 2.5 GHz (OS X 10.4.11)
Internal Hard drive: Serial ATA Maxtor 6B250S0
As I was trying to install Arch Linux on my Mac (dual-booting), I accidentally deleted my Mac partition! To add insult to injury, the version of linux I downloaded was the wrong one, so I couldn't even have that. I reintalled Mac 10.5 (I have the 10.6 cd, just haven't reinstalled that one yet), and now I want desperately to recover from the old partition.
View 10 Replies View RelatedToday I went to plug in my Lacie 250 GB USB external hard drive into my 13 in. MacBook to get a shirt template for a design I am making. I discovered that the hard drive just would not mount and show on the desktop, and I remembered that this happened a few days before, but all I did was unplug it and plug it back in, and it worked... except that today, that didn't work at all. I tried the other USB port, and the hard drive showed up on the desktop for about a second, and then disappeared. I kept on replugging it back into both USB ports, but nothing happened.
Then I tried to see if it would work on the PC beside me, and it was recognized as an external device; however, a message came up telling me the drive was malfunctioning. I am guessing this is from ejecting it incorrectly (because I am in a hurry to head to my next classes...I use this laptop at school), but I have incorrectly disconnected it before in the past and this problem never happened to me before.
Every single project I have ever created for my design career is on that hard drive, and all I want now is to get my files back. All I need it to do is show up on the desktop for just the right amount of time for me to copy my files onto my computer.
I read online to put it into the freezer for a while and it should mount, but that didn't work. I tried using Disk Warrior, Data Rescue 3, and Tech Tool Deluxe, but the hard drive did not show up on any of those apps.I tried plugging the hard drive into an iMac as well, but it did not show up either.
Is there a way I can access a laptop drive's contents from the harddrive via USB to USB (similar to Macs' Firewire-firewire) to recover the harddrive? An Asus laptop i'm using doesn't get into Vista and I tried Safe mode but it doesn't work..
View 2 Replies View RelatedA friend emailed last night saying he had a drive that had been 'acidentally formatted' (that's a lot of accidental mouse clicks if you ask me), that it took 2 seconds to format so it should have not actually wiped any data on there.
I've used Disk Warrior in other circumstances but never tried on an initialised drive. Nor would I know how to get a copy of such old software.
Does anyone have any ideas as to what software from that time might recover the data?
Long story short I dropped my 500GB Maxtor external HD (which is really just an internal HD in a chase). The drop was about 3 ft. It was not on so I don't think there will be much damage to the disk, but it no longer mounts. I was wondering if anyone could think of a way to get the disk to mount so I can recover files saved to it. I have Tech Tools, and Data Rescue II to recover the drive but as long it is not being recognized by the computer those applications are useless.
View 2 Replies View Relatedmy imac crashed last week but thankfully i had back up of all my files via my western digital my studio hard drive. thankfully right? well i royally screwed up and while trying to fix my crashed hard drive on my imac, i guess i accidentally reformatted my external drive, deleting EVERYTHING
I am pretty sure that I can go to a vendor and have them restore the HD correct? If so, what does something like that cost? I had probably 50 gigs lost, mostly photos, MP3, AVIs, and programs.
An external hard drive, 4TB Iomega...connected via eSATA cable...had a power outage and the drive won't be read by OSX now. (Yes, it was on a surge protector and no I did not have a backup. I was actually preparing for the process of creating a backup when the power went out!) Anyway, I have tried using Data Rescue 3 and DiskDrill to try and recover data from the drive. I can recover the first 1/3 of the drive, but it ejects when either app tries to access the bad block. how/what software to use to recover the data? I know there are programs that will avoid the bad block but I've only found them for Windows. Are there any that will do such a thing in Lion? I can not afford a data recovery service. Trying to do this on my own.
Info:
Mac Pro, Mac OS X (10.6.8), early 2008, 2 quad-core Intel Xeon
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
Our old Toshiba External Hard drive has failed ( approximately 3 years old ). It powers on and the blue light comes on, but the fans don't spin and you can't see it in the finder or on my computer ( we tried on both PC and Mac ).
Any ideas as to how I can retrieve the data... without going to a specialist and pay ���, or would that be the only option
My computer had frozen up so I had to restart it by holding down the power button. After I had done this, I kept getting a recurring kernel panic error. I had taken my MacBook the Apple Store and the tech who looked at it said that my hard drive was no longer good and that I would either have to replace it or purchase a new laptop. Regardless of whether I replace my hard drive or just purchase a new laptop, would there be any way to get my data that I lost off my old hard drive. I have some stuff backed up, but not recent data.
Info:
MacBook
My friends iBook hard drive has crashed and I'm in the process of replacing it. However, he had a lot of important data on that hard drive that he needs recovered. Is there any software that you can recommend (for Windows or OS X) that will recover data from corrupt/bad hard drives? I have software for NTFS/FAT32 but don't know of any good ones for HFS.
View 14 Replies View RelatedMy iMac G5 is basically dead. Logic board failure. Apple is going to replace it by giving me a credit toward the purchase of a new iMac but that is a different story. I need to send my G5 back to them. Can I take the internal hard drive out and transfer the data to a PC and then get that data off the PC onto an external HD?
My friend has a black Macbook that is extremely slow. It takes about 10 min. to boot up (literally), and when it does finally boot up, the good ol' beach ball comes up whenever I click on anything to do anything.
I then tried hooking up to a new iMac as a target drive. I was able to read some of the hard drive, but the User folder was empty, so I could not retrieve any of the data. Also, trying to access the target drive and trying to eject it made the new iMac slow way down.
And the hard drive was making a faint chirping sound, and then it turned into a crunching sound (much like that of the old 4200RPM hard drives of years ago).
I tried resetting the PRAM and also reset the power management. I also did a Safe Boot...all to no avail.
The DVD burner does not work. So, I could not do a hardware test or an archive and install. However, since the hard drive is most likely failing, an archive and install would not help any.
So, I'm guessing that the hard drive is going since the hard drives in Macbooks have been known to fail (it happened to a daughter of a friend of mine).
Is there a software out there that will allow me to retrieve the data from the drive? Trying to avoid having to go to a data recovery place.
I had mounted my drive to a G5 tower and it was severely frozen and would not let me shut down. I forced the computer off while the drive was still running and now when I try to mount it it, every computer tells me that the drive I inserted is not readable, and it gives me the option to initialize, ignore, or eject. I don't want to lose any of that data, is there anyone that knows how to recover these files?
View 10 Replies View RelatedI have a student who put most of her project work for the past few semesters on an Western Digital hard drive which was in a I/O Magic shell. It was dropped and immediately started a grinding noise. She took it to the local mac guru who has been unable to recover any of the data. My gut tells me it's a goner but I wanted to run it by the gurus here to see if they might recommend anything that we might try before giving up.
View 8 Replies View RelatedI had achived data from another computer (windows platform) and I decided to back up my data of my mac book from using time machine. After I did that I lost all the data I had before. how do I restore the old data back I had in it?
Info:
MacBook, Mac OS X (10.5.8), External hard drive
How do I revover an accidentaly deleted partiton from an external drive? Actually how do I do it without thirty party software, just using free or testdisk?
I am just not shure what I did, but I replaced my external HDD partition with a blank one. I didn't do/copy/erase/modify anything from the drive after that, so I think it would be easy to restore the partition.
Another problem is that the Quick Search of test disk is taking an eternity to finish. I'm imagining what would happen if I use the Deepr Search.
I saw videos of people doing it with other type of filesystems and it seamed so fast.
Info:
Mac mini (Mid 2011), Mac OS X (10.7.4)
My husband set up a partition on his MBP for Windows to run a program called TaskMaster for work. Well for some reason he was trying to use Time Machine last night and ended up deleting everything. He's at work, screwed and stressed out so I'm trying to be the helpful and supportive wife. Is there any way to recover Windows, the partition, and/or the TaskMaster stuff?
View 1 Replies View RelatedHow do I partition my external hard drive without losing the data already on it? I've been using it with Time Machine on my old computer, but want to use it as a regular drag-and-drop type back up on my new computer. Is there any way to basically split the hard drive so I can still access the Time Machine backups on my old computer, but also be able to use it with my new mac?
Info:
MacBook Pro, Mac OS X (10.6.8)
We have a client who has a MAC Mini running OS X. System is not booting into the OS, its freezing up during boot process. Data on the hard drive is critical to the user.
- The hardware utility on the OS X install cd says there's no problems, but when removed from the mini, connected to a PC, and tested using bootable cd IBM Drive Fitness Test and Seagate Seatools, the drive fails both tests.
- The drive has been connected to our data transfer system (running Windows XP) and unsurprisingly XP sees the drive in disk managment, but doesn't see the partition in Explorer.
- Research online led us to HFSExplorer, which dies see the MAC partition and file tree. But any attempt to extract files results in a Java runtime error saying that the source cannot be accessed. Once this error is received, HFSExplorer crashes and must be relaunched, and will not detect the MAC partition again until the computer is hard shutdown and restarted. THe physical drive vanishes from disk managment when the error occurs also.
- Further research led us to MacDrive, which mounts the drive (after reporting that it detected an error and asking if we still want to mount). We can again browse the file tree, but as soon as we attempt to copy anything, it fails and the explorer window with the MAC partiton vanishes. Again, the system must be hard restarted in order to restore access to the partition.
- Found a repair utility in the MACDrive program. Running that results in the error "80070002: The system cannont find the file specified."
- I'm out of ideas at this point.
I have a EMac with Mac OS X vs 10.3.9 Prior user erased hard drive. Took to ADR data recovery and they scanned the hard drive and were unable to recover any data. Looking for input on other techniques to recover data from hard drive or other companies that specialize in Mac data recovery.
View 6 Replies View RelatedSo I tried to install XP on my MacBook Pro via Boot Camp and it didn't go so well. To make a long story short, my OSX partition and Windows partition were both deleted so I re-installed OSX. When I went to re-intall OSX I could not choose a HDD to install it on, so thinking it was the right idea I created a new partition and continued the installation. After installation everything seemed fine so I went to restore from time machine, which I did. The only problem is I now have 100 GB of data on my computer, but it apparently doesn't exist as I can't see, or access any of it.
View 4 Replies View RelatedI was trying to do some tasks in Windows 7 in VMWare fusion and it was a little laggy, so I shut down the VM and restarted my mac. It took a little longer to restart than I'm used to, but when it came back on 99% of my main hard drive is now gone. All my bookmarks in safari, user accounts, most preferences are still here but all files are gone. How could this have happened and is there any way it can be reverted without a time machine back up? It's a mid 2010 21" iMac i3 8GB ram with Lion installed all newest updates have been done prior to this happening. I don't even know what to do, so much has been lost.
Info:
iMac, Mac OS X (10.7.3)
I have software that only runs under 10.4 on my older Imac. I would like to partition hard drive and run 10.6 on one and 10.4 on the other. Is this possible? Can I get instructions?
Info:
iMac, Mac OS X (10.6.5), Partition hard drive
Accidently deleted my iPhoto.How do I recover it?
View 5 Replies View Relatedis it possible to recover data from a crashed Mac hard disk on a windows platform.
View 5 Replies View RelatedI have a LaCie Big Disc Extreme that has failed. The drive indicator flashes continuously, and the disk utility can not see it. I have tried FW800 and USB to no avail.
Here's the problem: it is a 500 GB drive, but when I opened it, I found that it is actually 2 250 GB drives with an ATA interface. Is anyone familiar enough with these drives to know how they are formatted, and how to recover the data? I am running an early 2009 Mac Pro 8x2.26GHz.
recommend a trusted software program to recover a deleted excel file, or know of a way to recover a file without downloading an additional program?
View 2 Replies View Related