OS X :: Pictures On My System Slowly Corrupt?
Oct 15, 2006
I've started to notice that pictures on my mac slowly corrupt for some reason. I am 100% positive that these pictures were fine when I put them on my computer, and in fact I have intact copies of them on my external. But every so often a couple of pictures get screwed up. I've put an example of what happens. In almost all of them, bottom 3rd of the photo gets discolored and shifted over. I've cropped the heads in this photo and only the problem area is shown.
View 12 Replies
ADVERTISEMENT
Jun 15, 2009
In all my years of using a modern computer (with hard drives) I've never once had a corrupt file. For most of that time I have used PCs.One thing that struck me when posting here, is how many people advises me on keeping an back up (as opposed to a raid mirror). I know back-ups make good sense anyway (and I do for my most important files) but it just made me wonder... how many of you have encountered a corrupt file whilst using a Mac/OS X?
View 4 Replies
View Related
Aug 19, 2010
a few days ago i unplugged a USB cable from the back of my MacPro 1,1 and the screen turned all blue (like an overlay) and the machine crashed. Since then the computer has been running extremely slow? it takes 15-20 minutes to start up (if not more) and once booted, every action is delayed as the computer is "thinking". I can type about three letters into a search box per minute as an example.The machine has moments of clarity where I can open a window or start launching a program, then to begins to pause again.The machine as of now is unusable. I have been able to get the process manager open and did not see anything unusual.
View 5 Replies
View Related
May 13, 2010
I just installed a second eSATA card to my system. The connected drives mount very slowly (long delay) and eject even more slowly (more than 2 minutes, sometimes hang, sometime kernel panic).
View 14 Replies
View Related
Oct 30, 2008
Ok the patient here is a new 2.0 Ghz Macbook. I just woke it up- or tried to. the sleep light was on solid, not pulsing with as it does when sleeping. It didn't respond to key presses of track pad presses. It did power back on after pressing and holding the power key. The desktop was greyed out and a metered progress bar came up and it slowly booted bakc up then resumed as normal. Is this that deep sleep mode, or is this something else?
View 5 Replies
View Related
Dec 10, 2014
Problem Description:
1. System prints PDF files very slowly, about 50 seconds per page, a text only page. Sometimes will just continue sending data to printer as indicated by flashing green light on printer – does not stop sending and printer does not print. Problem also present when try to print PDF files as sent by others over internet (eg TD Bank statements).
2. Unable to cause double sided printing using IMac – no problem with PC.
Trouble shooting:Took the same one page text only file that was very slow in IMac, transferred to PC using a memory stick – connected printer to PC using same USB cable – page starts printing in about 1 seconds – no problems.No difficulty in printing Word files other than no double sided. Think the problems started with OSX Yosemite upgrade and the companion Safari upgrade. Auto update for software is on and no new updates. Old drivers removed and new one installed Tried Apple internet chat to resolve problem – was unable – the user forum indicates others have had difficulties with printing PDF files.
SystemIMAC 27 INCH, LATE 2013Processor 3.5 GHZ INTEL CORE I5Memory 8 GB 1600 MHZ DDR3Serial Number C0*8J4OS X Yosemite Version 10.10.1SAFARI VERSION 8.0 (10600.1.25.1)Adobe Reader XI Version 11.0.09Printer HP LASERJET 1320 on wired USB connectionDriver HP Version 19.8 Word Microsoft for Mac 2011 - Version 14.1.0.
View 7 Replies
View Related
Apr 3, 2012
My system runs very slowly at times and returns "not enough memory" messages. I have run the HW test and have 4GB avail, what could be wrong?
Info:MacBook, Mac OS X (10.5.8)
View 1 Replies
View Related
Apr 7, 2009
What i did was open the ipod through mycomputer (windows XP) and cut the folder that contains all my music and pasted it into mydocuments so i had full amount of memory on my ipod to use it as a memory device. I gave it to my friend to put some videos into my ipod again through mycomputer. He didnt allow the ipod to sync on his itunes. Now i have it back i plugged it into my pc and my itunes couldnt pick it up and neither can mycomputer. I left it plugged in and restarted my pc when it booted up i opened itunes and it was sort of froze, after leaving it for a minute or two my ipod cam e up on itunes but it said it was corrupt. I ran the restore over night as it was taking along time and when i cam back this morning it was still doing it! Whats wrong with my ipod?! is there any other way to system reset it? do you think my mate should have synced it with his pc?
View 1 Replies
View Related
Jan 31, 2009
I inadvertently clicked something and my whole i photo with 9,000 pictures on it disappeared. I cant find it anywere
View 1 Replies
View Related
Jun 26, 2008
A clean installation took about 13 minutes from start to finish, which is a world of difference from the hour or so that a clean 10.5 Leopard install takes. Other then the time involved, there are very few differences between the 10.5 and 10.6 installation processes at this time.Once you're up and running, it feels very similar to Leopard. I don't know how much this will change through Snow Leopard's development, but don't expect a terribly different interface. The subtle changes to the current Aqua definitely look good though.
View 24 Replies
View Related
Apr 13, 2012
System preferences stalls when loading pictures on desktop/Screensaver tab - only way out is force quit - already re-installed OS
Info:
MacBook Pro (15-inch Core 2 Duo), Mac OS X (10.7.3)
View 2 Replies
View Related
Apr 10, 2012
Is there a way to get pictures that are part of the library on my iphone on to my macbook. I find it completely unbelievable that Apple has purposely made it impossible to be able to get 4 YEARS OF PICTURES off my Iphone and back onto my computer.
Info:
MacBook (13-inch Early 2008)
View 1 Replies
View Related
Jul 5, 2009
I changed the default folder view settings to increase the thumbnail size of the file in the folder, then I clicked the button to make these settings default. All was good until I opened another folder and the view was all "jacked". The folders were overlapping each other even when the screen was maximized, I have to right click and click on "Clean up" before the files jump back to normal. I tried to change the default setting back to normal but the folders are still messed up when I open new folders.
View 1 Replies
View Related
Jan 3, 2010
Somehow my Arial font has gone corrupt. Firefox and any other program that uses Arial now replaces a Space character for every Arial character.
View 2 Replies
View Related
Jun 22, 2014
Messages keeps switching the conversation view from "Show Names and Pictures" to just "Show Pictures". This is in the menu under: View > Messages > Show Names and Pictures. I have to change it multiple times a day, including every time I open the app from a closed state.
This is very confusing in group iMessage conversations where all the iMessages are coming from the same grey silhouette icon. The issue is only happening on my Mac mini. It's not happening on my MacBook Air. Both are running Mavericks 10.9.3...So I keep changing the setting here, but it somehow just switches back to Show Pictures only:
View 9 Replies
View Related
Apr 15, 2009
I ran out of hard drive space. 7 gigs left out of 85. So I wiped and reinstalled, to try to speed things up, get rid of any fragmentation, etc. I have yet to install Photoshop, and I think I may have a few .plist files left to transfer over, but right now, with ALL of my data back on it, I have 35 gigs free. That's 28 more then I did before.
View 6 Replies
View Related
Aug 11, 2009
iMAC G5 System 10.5.8
"The Identity cannot be opened with this version of Entourage"
Removed and reinstalled MS Office 2008 and I still get the error and cannot open Entourage and it is affecting Word, Excel and PowerPoint
I have rebuilt the database but still get errors:
ERROR: Failed to open database [Head]
ERROR: Corruption opening database [16003:""]
View 2 Replies
View Related
May 7, 2008
I have been beating my head against a wall for weeks trying to boot into Windows. So after weeks of searching for a solution and many attempts of re-installing both Windows and OSX. I am at the mercy of some of the very MAC wise folks here. So I will try and be as brief as I can.
I have a first gen Mac Pro that has worked great since I bought it in 2006. I have bought a Gforce 8800GT 1st gen upgrade video card. Bought it the first day it shipped, like a lot of other people. I followed the the thread that pushed apple for a upgrade for us early adopters. And am glad that apple listened to their customers and made a compatible ROM for the card.
So now to my problem and why I think it maybe a EFI issue. While waiting and reading about the then rumored video card upgrade, I tried to use a PC version of the 8800 GT, same card with a PC ROM. Well If I would of read more first I would of known that it would not work, and was really just taking a chance and thought that somewhere someone would make this work. Boy was I wrong. So after taking out the card and putting back in my 7300 stock card, I can no longer boot into windows. I get a blue screen stop error 0X000000CA (0X0000002, 0X89A0B0C0, 0X00000000, 0X00000000). Didn't turn up much searching for that error. So the symptom I have is as follows: power on holding down the option key, click on my windows disk partition on a separate NTFS formated HD, the computer try's to boot into windows, but after just a quick flash of Windows XP splash screen then straight to the blue screen. Now fast forward a week. apple releases the upgrade, took the PC cad back, ordered the MAC upgrade hopping this would fix the problem, It didn't. So I do a total re-install. I totaly reinstall OSX on a fresh HD, run all updates for 10.5.2. I put in another fresh drive in and run Boot camp to install a fresh copy of XP. The CD installs the startup files to RAM, then enters the setup partition/format screen. I chose new partition select NTFS full option, the HD formats. Now windows loads the install files to the hard drive and reboots. Now I am back to where I started. OSX works perfect XP will not even install new, much less boot into the old partition that is on another HD that I have pulled out right now, I also went back to the 7300, no change. I can hit F8 and get the advanced menu, if I select safe mode it freezes and goes to blue screen. If I move either of the cards to another slot I get the same result but the Mac Pro reboots in an endless cycle after a quick blue flash. In the 16x slot it just freezes on the blue screen.
So after searching for someone with the same problem it seems I cannot find a solution other then what I have read about EFI and that it is basically emulating a BIOS so windows can boot up on the Intel hardware. So am I even thinking in the right area? Have I some how corrupted the EFI firmware? Any suggestions? I bought the Mac Pro to run Pro Tools in windows along with Windows only apps. I use final cut pro in OSX, but I spend most of my time in Windows using the awesome power of the machine. I like OSX but it is not a total OS solution for me, I really like having a hybrid, and VM's and such in OSX will not work with Pro Tools.
View 8 Replies
View Related
Apr 26, 2009
My iTunes library has decided to be obnoxious and while listening through a bunch of tracks, one song kept jumping like it was corrupt - as if half a second was removed and then spliced back together.
So, being a good little boy I accessed Time Machine, went back a few months, found the file in Time Machine and it wasn't corrupt. Then, just to satisfy my own curiosity, I went out of Time Machine and played the supposedly "corrupt" mp3 direct from Finder using QuickLook and it played fine.
View 5 Replies
View Related
Aug 8, 2009
I have a 2009 Mac mini, and since installing 10.5.8, my (fullscreen) screenshots (CMD+SHIFT+3) are corrupt - full of lines like a TV with bad signal. What is the matter?
View 6 Replies
View Related
Mar 20, 2010
I just recently got my hands on the Kodak Playsport waterproof 1080p shooting mini camcorder. Have pretty much loved the thing until this point.
I responded to a call to a pin-in accident yesterday with this little fellow strapped to my chest on my fire coat. It's the first time I've taken it on a run, and it turned out to be a pretty bad one. I hit record while on the truck enroute. We worked for about 35 minutes extricating the sole passenger, and when all was said and done, I returned to the truck and removed my camera. The record light was still on, the screen still showing a live preview, but the recorded time number had stopped at about 37 minutes. All the controls were unresponsive. Not even the power button worked. After about 5 minutes, I had no choice but to remove the battery to shut the camera off. I turned it back on, and was shown an exclamation point where the video I had just shot was. The video would not play. I removed the 8gb SD card and plugged it directly into my computer, and the file size of the last video shot was only 67MB, not nearly high enough for 37 minutes of 720p @ 60frames per second. I am still unable to get even that fragment to play.
Any ideas on how to either recover more of the movie from the SD card, if it is there (nothing more is shown in the finder, though), or how to get this fragment to play?
I've tried VLC with no luck, and File Juicer, Visualhub and iSquint to no avail.
Thanks guys. If I can get it to play, maybe I'll share the video with the MR community
View 3 Replies
View Related
Apr 13, 2010
It installed fine and worked, so i then decided to install a game (L4D2) installed about half way then BSOD!
I didnt mind to much until i realised I could no longer boot into OSX, windows works perfectly.
I have booted into Single user mode and have successfully managed to find all the files they all seem to be fine. I just cant figure out a way to back them up, I am unable to mount a usb drive whenever I use the MKDIR command in /Volumes/ I get the message 'file exists' or something similar.
View 1 Replies
View Related
Jul 27, 2010
Having some issues with mac mail at work. My mac mail is connected to our exchange server. It is working fine. Ran into a problem today. Mac mail quit for some reason and when I fired it back up, it walked me through the process of configuring mac mail to connect to exchange. The odd thing now is the only mail I see in mac mail is new mail, none of my old previous mail. I see my folder structure that I created (held on exchange), but I cannot seem to figure out why I cannot sync my mail to show my emails in mac mail. Is there a way to clean out the old stuff in mac mail and start fresh?
View 2 Replies
View Related
Apr 2, 2012
First some background info:
-Running a Late 2006 macbook 2,1 with original RAM (512x2) and original OSX installation DVD.
-2009 I upgraded the RAM to 2GB+1GB, and upgraded the HDD to a 320GB HDD.
-2011 First the battery died, then the 320GB HDD failed, making a clicking sound. I plugged it in an external bay and sure enough, still clicking. Macbook dead for 6 months.
-2012 So now I bought a new OCX Vertex 120GB SSD, along with a new battery.
I boot from install DVD and format the SSD to journaled. I install the original OSX tiger (excluding disk space pigs like printer drivers, language translation, and some large 'bundled programs' like iDVD, garageband etc) After OSX install, setting up the macbook etc, I am logged in and running fine. However, I have found through trial and error (I have reformatted and reinstalled the OS at least 10 times now trying to figure out *** is going wrong) that if I reboot, I get either (1) flashing question mark folder, or (2) kernel error, unable to find driver for platform ACPI, and the macbook will not boot.I then boot from install DVD and run disk utility.. and find that the SSD has an error: 'Invalid node structure. The volume needs to be repaired' however it cannot be repaired, it has to be reformatted.I have it working right now, and it will work until I go to reboot. And right now if I browse the SSD, there are files on it. 5GB are used, 107GB available. To check the SSD earlier, I even reformatted as ms-dos and stuck the SSD in an external bay and copied files back and forth using a windows machine no problem. then reformatted to journaled, installed OSX, and back to same 'invalid node structure' issue.I even tried different RAM. I upgraded last year, but to make sure I am starting from original system, I reinstalled the original 512MB chips that came with it when I bought in 2006.
Info:
MacBook, Mac OS X (10.4.8), Late 2006 macbook 2,1, 2.0GHz IC2D
View 1 Replies
View Related
Jun 24, 2014
I was editing a music video last night and finished the edit. I then began to do my color grading. I use Magic Bullet Looks and was using Neat Video Noise Reducer as well. Nothing out of the norm as far as my workflow goes. I got about half way finished with color and turned my computer off when i went to bed. This morning when i reopened fcpx the project loaded but showed a few spots of the timeline that needed to render (the orange bars). BUt once i clicked inside my timeline fcpx froze and i would have to force quit the program.. I have tried uplugging the drive that the events and projects are saved on and opening fcpx that way..it works and other projects from other drives are working fine but when i plug the drive with the corrupted project it loads the project in the timeline but still freezes every single time i click in the timeline and the render percentage is stuck at 0%....Every once in a while when i try it will render about 9 to 30 % then freeze again..
-USING FCPX 10.1
-2011 iMac
-2.5 GHz Intel Core i5
-4 GB 1333 Mhz DDR3
-OSX 10.9.2
View 1 Replies
View Related
Dec 26, 2008
Dear members I'm having problems with safari being very slow and i'm trying to resolved this problem.
View 5 Replies
View Related
Jul 9, 2009
I'm using a 2.4GHz MacBook, and Safari 4 takes 20-25 seconds too open up... Does it take that long for you? It's weird because no other application that I have takes even close to that long to open.
View 7 Replies
View Related
Dec 11, 2009
What the heck is that?
The speed of hard driver is so slowly
mbp985 15 (mid 2009)
View 8 Replies
View Related
Mar 24, 2010
Youtube works extremely fast while NHL Gamecenter and Hulu drag along. Netflix also runs perfectly fine, and I can download at a consistent 5MB/S on Itunes. Also, my 5 year old PC plays Gamecenter and Hulu just fine. I have the latest version of flash player.
View 6 Replies
View Related
Feb 11, 2012
my mail app is very slowly since the lion update 10.7.3 I need mor than 5 minutes to synchronisize my exchange account via mail 5.2.the same exchange mailbox is working fine on my iPhone/iPad.
View 2 Replies
View Related
