Hey guys, I was just wondering if its possible for me to upgrade to snow leopard using the 10.6.7 grey install disk? A friend of mine is willing to lend me his but I'm not quite sure if it can. So my question is, can I use his grey install disk with version 10.6.7 to upgrade to snow leopard or do I need the retail snow leopard disk?
Info:MacBookPro, Mac OS X (10.5.8)
Pretty smooth sailing until I had to reboot my mac pro. It just stops at the point where you have the grey Apple logo and the spinner.
I have a Snow Leopard Install Disk for the 13-inch Macbook Pro model.I also have a 21-inch iMac. I have OS X Lion installed on both. I have Snow Leopard installed as a partition on my Macbook Pro, which I installed via the install disk. I want to do the same thing for my iMac but I am unable due to (seemingly) my install disk is for a Macbook Pro and not for an iMac.
Info:
iMac, Mac OS X (10.7.3)
How do I launch disk utility from the Snow Leo install disk?
View 2 Replies View RelatedI am running Snow Leopard on a new MacBook Pro. I have noticed that often when I am typing, the cursor will jump to another location. So, I might be typing on a line and then suddenly, the cursor will jump to a line, usually above the line that I had been typing on.
View 8 Replies View RelatedI work in an office where we've picked up a few new MBPs. These machines have Snow Leopard and I'd like to install it on my machine running Leopard. Is there any way that I can install 10.6 on my machine using the Disks that came with the new machines?
View 1 Replies View RelatedDoes anyone know how many machines I am legally allowed to install 1 copy of snow leopard on?
What powers do apple have to trace 1 copy installed across multiple machines?
While upgrading from Tiger 10.4 to Snow Leopard 10.6 (Mac Box Set purchased from apple store) on my macbook pro the installation process froze up. Tried several times with same outcome. Even wiped the disk & reinstalled original software (tiger 10.4). No disk repairs necessary. So starting with a clean slate snow leopard still wont make it through the installation process.
View 2 Replies View RelatedMy HDD died recently and I cannot get booted into OS X. It just hangs on the grey screen with the apple. I am (was) running 10.6.8
I am having a lot of trouble trying to boot from my install DVD. First of all I purchased a new HDD which came with Lion pre-installed on it. This worked fine, except when I tried to restore my latest time machine back up it used up 200GB of my disk space but nothing is restored? No doucments or music anywhere, photos, nothing. There is no change at all except half my storage has disappeared. I had posted another question on here and the reply said to use setup assistant, which I could not locate in Lion? I then tried to install Snow Leopard back over Lion but it would not let me. I tried to boot to the install disk but it just hung at the apple screen again.
I gave up and bought another brand new HDD but it won't recognise it on boot up. I just get a flashing folder with a ? in it. I tried to boot into the install DVD and again it wouldn't do it.
I then went back to my original HDD, and tried to boot to the install DVD from that (I hadn't tried this first off as my install disk was elsewhere and I purchased the Lion HDD as a stop gap measure) and it STILL wouldn't do it? This is now the original disk with the original install DVD (10.6) issued with my macbook pro when I purchased it and it will not boot to the DVD. Why why why?! It is almost enough to make me bin the lot and switch to windows.
Info:MacBookPro, Mac OS X (10.6.8)
this isn't an isolated issue - there are threads about this over at Apple and InsanelyMac: I'm unable to install Snow Leopard. When I run the installer, it'll tell me that "Mac OS X cannot be installed on "Macintosh HD", because this disk cannot be used to start up your computer" (Macintosh HD being my OS X volume, obviously). I'm seeing this issue on a relatively new 1.8ghz Macbook Air with a 128gb SSD - however, as far as I can tell from the other threads, the problem also affects iMacs and Macbooks.
Some people apparently attributed the issue to a PGP installation they had on their harddrive. Others found a file called backup.backupdb in their root - deleting it fixed the problem. However, most people don't have any of that installed on their computers and the upgrade still won't work. - if anyone has found a solution to the issue, please let me know :-( I'm stuck here. I don't have an external drive for the MBA and booting from a network drive has never worked on this particular machine - so I can't do a clean install, either.
I have a Macbook Pro with an inoperative slot-loading Superdrive. I purchased Snow Leopard today, planning to use my Mac Pro w/working Superdrive in Firewire Target Disk Mode to install the OS on my Macbook Pro. I can mount the Snow Leopard install via TDM, but the installer informs me that I cannot install Snow Leopard from "this volume" (presumably because the Target Disk Mode connection isn't recognized as an optical drive?). I've also tried to use "Remote Install OS X," but because my MBP is not an Air, it doesn't have the necessary firmware to select a network boot on startup by holding Option. Am I out of luck until I get access to a firewire external DVD drive?
View 7 Replies View RelatedI've been a long time lurker on these forums and you've helped me out numerous times when my computers decided to stop working.
I got my Snow Leopard disk in the post today but unfortunately my disk drive in my Macbook Pro seems to finally be well and truly knackered.
I should be able to borrow a usb/firewire disk drive from a friend, so would I be able to install ok from this external drive, and is there anything I would need to mess around with to make it work?
I have an early 08 MBP that shipped with Leopard. I upgraded it to Snow Leopard quite a long time ago. I feel like doing a clean reinstallation but my Leopard disk is spoilt.
Is it possible for me to do a brand new clean installation just using that Snow Leopard upgrade disk?
I am trying to upgrade from leopard to snow leopard on my MacBook Pro. However, every time I insert the install disk, the machine whirs for a moment, and then ejects the disk with no error message. I tested my drive with a different dvd and it works just fine. All of my other software is up to date.
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.5.8)
I have cracked my OS X 10.6.4 install disk, (which, it seems to mean that my iLife application disk wont work either). Is there any way to get a replacement? I don't always live near internet access, so Lion isn't really an option.
View 2 Replies View RelatedMy computer is corrupted and needs the intall disk to fix my issues but lost my install disk to my book 10.6.8
Info:
MacBook, Mac OS X (10.6.8)
I have replaced may Snow Leopard Family pack and have found that the replacement disk is also faulty. It stalls at around 40 minute mark and does not install. I have confirmed a general problem from two store sources. I also have similar problem with copies i bought from US. There is a noticeable defect along the outside edge of disk and swirling to a coma form of about a centimeter. Seems like a quality control issue at the disk creation instead of information burning. I have had no problems with the single versions of the OS.
View 1 Replies View RelatedI was upgrading from Tiger to Snow Leopard (I asked a worker in the Apple store and he assured me it was okay to do so) and about 15 minutes into the installation I got a message saying "Unable to install. Please retry". Then when I retried it says "The contents of this disk can't be changed. Mac OS X couldn't be installed on this disk."
I have a black MBP and it is Intel based and I fit the system requirements
can anyone tell me how do I set up my mac to auto install a software disk when I insert it.
Info:
MAC OS X, Mac OS X (10.6.4), imac
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible?
Info:
MacBook Pro (13-inch Late 2011)
My Macbook pro has just had a new 500gb hard drive in it and osx snow leopard had not been put on it because i never got a disk when i bought it. It still comes up with the grey screen with the flashing folder which i think would be normal because there is nothing on the hard drive. How do i install OSX Snow Leopard back on it the cheapest way possible? and easiest.
Info:
MacBook Pro (13-inch Late 2011)
I recently upgraded my Macbook Pro to Snow leopard. About 4 days later, my Mac crashed. When I tried to restart, it came up with the grey screen with apple logo and spinning disc. I have tried all of the resets. I then decided to try and re-boot from the SL install disk. When it asked me to choose a destination volume, however, there was none available. I tried disk utility, but there was no disk available there either. I then went back and tried to use the original install disc that came with the Mac...same results. It appears that my internal hard disk has disappeared. I wonder if i am going to have to replace the hard drive?
Info:
MacBook Pro (13-inch Mid 2009), Mac OS X (10.6.8)
I run a computer business. My customer gave me a white macbook core duo. I upgraded to 2gigs of memory from 512mb. I then purchased a full copy of snow leapard and did a clean install. I setup garageband for the first time. This is all I want to use the computer for. I don't deal with macs in my business. I only work on windows. So, I thought this computer would be nice just to use to setup a small recording studio. I did everything by the book and now when I record I am getting the disk to slow error 10005. This happened after I recorded about five songs. I checked the we and it seems like this error has been around for years with frustration and no resolution. My question is this. Should I just buy another computer or waste my time trying to fix this error. I don't mean that in a bad way. Since this error has been around for so long, I don't to spend all my time working on the computer when I could be recording. What would you do?
Info:
GarageBand (Mac) '11, Mac OS X (10.6.8), Garageband
I got SMART warning about my hard disk, I got it replaced by a shop, but said I would do OS restore myself. (cant afford cost )Thought it would be simple - but it is anything but.  It appears my install DVD is damaged, so was not able to boot with Grey OS install disk - holding the C key.I managed to get iMac to boot up using the old disk - using firewire dock. However I was not able to restore old disk and OS to new disk, Due to IO read error.(this is why I had the SMART warning). So I am unable to get the OS on the new HD using the old disk or the DVD as these are both damaged.  The computer is running, so I thought I would try buying and downloading LION - then using the migration tool . The download is still running after 2 days.I went to apple store, and was told that they cannot replace DVD , so I should bring in the iMac = and pay for the restore. Dont wish to do this. As I have the computer and OS running, is there anything I can do to get a time machine restore from another backup disk (USB).
Info:
iMac, Mac OS X (10.5.6)
I just bought a slightly used 2011 MBP MD313LL/A that has Lion installed. This is my first macbook (I have an iMac) I need to take Lion off and install Snow Leopard to be compatible with my current software. Any suggestions to the safest way to do this? I will be installing VmFusion 4 to run my Windows XP.
Info:
MacBook Pro, 13.3" Macbook Pro MD313LL/A-4GB/750
My brother in-law has an older white macbook running Tiger.
I have an aluminum Macbook running leopard 10.5.8. My brother in-law was wondering if it is possible for him to use the leopard install disc that came with my mac to install on his laptop to use.
I didn't know if they one that comes with the macbook has special drivers or anything.
I have had a string of bad luck with my mac, a couple of days ago the screen started flickering and my mac froze (could still move trackpad mouse, not click). It started up fine again.. It did this a couple times more (had to restart pressing power button). Then it froze evereytime I put the power cable in it. I solved this problem with an PRAM reset.
But now it still freezes up, the screen will start flickering and i can only move the mouse. When i try to reboot it gets stuck on the grey screen. only once every 20 times Ill get into the os.
I have tried a pram reset, holding the power button, safe mode, hardware test (no probs found), starting up without external devices.
It wont boot from the cd if it is stuck on the grey screen...
Could someone may be tell me what to do? thinking about bringing it to the store tomorrow .
My MBP(#1) is stuck in grey screen. I've tried 4 or 5 of the steps suggested to get the computer to boot up. I used Target Disk Mode to copy hard disk files to my other MBP(#2), then inserted the Mac OSX install disk, then turned off the MBP(#1) and restarted with the C key held down. Instead of getting the OSX installation, it remained grey and gave me repeating 3-beeping sounds. What does this mean?
Info:
MacBook
Pro, Mac OS X (10.6.3)
IMac has snow leopard and does not boot has grey screen
Info:imac dual core 2.4 ghz, Mac OS X (10.6.4)
MacBook 10.6.8 startup goes to grey screen with apple, wheel and progress bar, and takes 5 minutes. This started only recently. What might be wrong?
View 1 Replies View Related