OS X :: Mouse Cursor Disappearing On Some Websites?
Nov 6, 2010on certain web sites my mouse cursor just disappears sometimes does this happen to anyone else. huffingtonpost is on that it happens on often.
View 1 Replieson certain web sites my mouse cursor just disappears sometimes does this happen to anyone else. huffingtonpost is on that it happens on often.
View 1 RepliesWhen I wake my computer half the time I do not have a cursor. Is anyone else having this issue?
Sometimes when I open apps and shake my mouse it comes back. I also usually use expose to start my screen saver and then shake the mouse to turn it off.
FYI: i7 iMac with Magic Mouse
My mouse cursor is dissapearing from the screen nearly all the time, SUP apple, it just works, huh or nuh. Seems to have been a problem for a while
Info:
MacBook Pro, iOS 7.1.1, disappearing mouse curser
Anyone come across this? I 've been having it a lot recently on my imac, not my pbook though, and I can't seem to find how to fix it... very strange behaviour, as soon as you start writing the cursor vanishes...make for some very hard writing I tell you...
Well, that's ms, they might even have it as an option somewhere that I cannot find...
I have this issue where my cursor just disappears on my screen. It still registers as there and I can click on things, but cant see the cursor until I bring it down to the dock, and it reappears. It happened a lot with my old mouse, even after I changed the battery, so finally I got a new mouse about a month ago... and now it's happening again.
Info:
iMac, Mac OS X (10.6.8)
I have a late 2013 Macbook Pro with retina display. I have had an intermittent problem with the cursor disappearing. It is extremely annoying and I haven't been able to stop it.
I reset the SMC, it worked for a while but the problem is back now.
Everything was fine. Then I ran the software update and there was Safari 4.0.5 and I decided to update. After my iMac had restarted, the OS went completely berserk. If I click the dropdown menus, they start to flicker and run trough over and over again by itself and I can't click anything. My mouse buttons do straight things, bring up the finder and then I can't even go through the folders. I can't write with my keyboard, it just gives me random letters and I can't delete them. I mean the computer went completely crazy. I've never seen anything like this and I've used this iMac perfectly now almost two years. Everything is just flashing, flickering, jamming, cursor disappearing and doing straight things, I can't do pretty much anything. This has to be a virus, right?
View 17 Replies View RelatedMy cursor (in all forms) on my macbook seems to be disappearing--it appears that every other column of pixels has gone clear as well as a clear border, leaving only a few black vertical stripes as the normal cursor. It's a black outline when it's the hand and it's a few colored stripes when it's the spinning wait cursor.
Interestingly, when you do the ctrl+zoom in a few degrees, the cursor reappears.
If anyone thinks it matters, I was in the middle of backing up via time machine when it disappeared...
Any suggestions are appreciated.
My cursor (in all forms) on my macbook seems to be disappearing--it appears that every other column of pixels has gone clear as well as a clear border, leaving only a few black vertical stripes as the normal cursor. It's a black outline when it's the hand and it's a few colored stripes when it's the spinning wait cursor.
Interestingly, when you do the ctrl+zoom in a few degrees, the cursor reappears.
If anyone thinks it matters, I was in the middle of backing up via time machine when it disappeared...
When I wake from sleep, my mouse cursor is a beachball that is NOT spinning. I can use my mouse like normal, move it, and click on things, but its still a beachball. I beleive it stays like this until the mouse is actually supposed to be a beachball (when I open a few programs at the same time and the computer starts "thinking"), then it starts spinning and after that it goes back to the normal black arror cursor.
Might be a problem from the 10.5.3 update? anyone else experience this?
Something weird happens to my mouse sometimes and it seems to only happen (I think) when Parallels is running. The pointer just disappears. It turns invisible. It doesn't only happen when the pointer is inside the Parallels window, it also happens when I am using Mac apps. I am using Version 2.5 (and can see no real reason to upgrade to 3) and yes, I have installed Parallels tools!
View 5 Replies View RelatedI've restarted the computer and it works again but it seems to do this quite often.
View 2 Replies View RelatedWhen I wake my computer half the time I do not have a cursor. Is anyone else having this issue? Sometimes when I open apps and shake my mouse it comes back. I also usually use expose to start my screen saver and then shake the mouse to turn it off.
FYI: i7 iMac with Magic Mouse
I am using an Apple Wireless Mighty Mouse, and have been since i got my macbook about 9 months ago. I love the mouse, but i have noticed a lag in the cursor. At random times, the mouse cursor starts to lag. When this occurs, i will either clean off the lens or turn it off and back on. Most of the time, these alternatives do not work. I then just wait and it eventually turns back to normal.
View 2 Replies View RelatedEver since installing 10.5.7 I have been experiencing problems with the mouse cursor. On my intel iMac's primary display (but not my external display)... the mouse cursor will disappear while moving the cursor, then reappear after the movement is over, so it looks like the cursor is flickering rapidly when it's in motion. This flickering problem will happen with a normal cursor only intermittently (usually when the cursor is over a scrollbar), but it always happens when the cursor changes to a crosshairs for screen capture (command-shift-4). As mentioned above, this only happens on the internal LCD, not my external monitor.
View 2 Replies View RelatedI'm switching over from Vista so still trying to get used to snow leopard. Couple of things that are bugging me:
1) The trackpad seems to lag slightly when I select text or re-position windows on the screen. What I mean is that when I double click and drag to select some text for example, when I lift my finger from the trackpad (which should end the select procedure) and move the cursor elsewhere, text selection still happens. The only way around this is to not touch the trackpad for about a second before I can move the mouse cursor elsewhere. Is there a way to get rid of this 1 second lag?
2) When I'm typing, and want to move the key cursor over my text, when holding down the arrow keys, the cursor still moves over text very slowly. Is there a way to speed this up?
I would like to capture some videos from my screen and use them as part of a video I am going to edit. The video would be of me accessing an application, letting it run and then capturing all of this. Yet I would like it so that the mouse doesn't appear while you are doing this. Is is possible to hide the mouse cursor at will, so that it is invisible?
View 5 Replies View RelatedHas anyone had this issue upon waking up the mac, the mouse cursor isn't visible yet you can still click on things. It takes a few mins before the mouse cursor eventually becomes visible.
View 5 Replies View Relatedi have a 13 inch macbook pro running 10.6. Every so often (a few times a day) my mouse cursor will disappear off my screen. It still works because things are hilighted on the screen and I can still click things when i move the trackpad around with my finger, there is just no pointer on the screen. This only started happening this week and I have had this computer for about 7 months.
View 7 Replies View RelatedThe mouse cursor on my G4 (see specs below) is frozen. The mouse I usually use is a standard apple mouse purchased about seven years ago. I have tried another mouse (no success) and rebooted using the installation disc in the hope of a disc repair, but again no mouse cursor movement. I am at a loss as to what to do next.
View 6 Replies View RelatedMy mouse cursor is stuck on a spot on my screen. When I move it the pointer springs back to where it was stuck in a second. Can't do anything. Shut the Mini and restarted but still same problem. Cannot get to sys pref to check anything. Running the latest Lion build. Trackpad and wireless keyboard. Also tried with USB mouse with same result.
Info:Mac mini, Mac OS X (10.7.3)
This bug has been annoying me since I bought my MBP last summer. Mavericks / Yosemite. I made a video to show what I mean - [URL] .....
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
This Imac 7.1 2ghz, 20" is less than a year old. I switched because it promised friendlier functioning especially for my wife. I use Parallels for XP/Quicken only. What drives me crazy is a 2-5 second delay for almost anything I do: scroll, copy, move cursor, any art or photo ops and TYPing. I read all the things to reduce the Pinwheel and did them. Finally I added 2 more Gigs of memory (total 4) and it made no difference. Activity monitor shows tons of free memory.
I cannot believe that I use my tiny Asus to type most of my stuff now because on the iMac I can type something then in the middle of a word, count 'one thousand 1-3 then sometimes get a pinwheel for 2 counts and it resumes typing. It does not seem to matter much if I close everything else (wow that eliminates all that handy windows stuff Apple is famous for).
I am be watching a movie on my iMac, or just do other tasks, and everything would all of a sudden freeze up on me, with the mouse cursor the only thing moving around. The system wont let me do anything, and I have to hold down the power button to shut it off.
View 7 Replies View RelatedI have funny problem, well more of an annoyance than a problem. On my MBP, after maybe a day or two without rebooting (ie. just closing the lid), the mouse cursor drop shadow disappears and the cursor gets jaggy/aliased edges (imagine the cursor from Windows XP, but black). A reboot will bring it back.
The MacBook Pro is a stock late 2009 17" - 2.8Ghz, 4GB etc. with Mac OS X 10.6.3 (this annoyance has happened since 10.6.1). I have the graphics mode set to performance as 90% of the time I use the machine, I'm plugged in.
I've tried to see if there's a pattern to it, but it's seemingly random. Sometimes it's the same day as a reboot, sometimes I go a whole week without rebooting and still have the proper cursor. It's pretty weird. I originally thought it may have related to opening the lid while on battery power, however it's happened a couple of times when I've opened the lid while plugged.
Edit: Another interesting point.... if I plug an external display in, the cursor gets back its shadow, but then when I unplug the screen, it will return to the jaggy look (until a reboot).
Is there a utility that I can use that will allow me to have the same precision and accuracy with a mouse in mac OS as I have in windows? There is a very different feel when using a mouse in OS X, and I just don't like it.
View 1 Replies View RelatedProblem: Was surfing on my Mac Mini when the cursor starts acting erratically, when I try to move it, either freezing or it jumps all over the screen. I have tried repairing permissions using disk utility, resetting the 'pram', used clamXav to scan for virus. starting in safe mode to repair permissions. Don't think it is the mouse its self, used it on Macbook and it's fine.
View 5 Replies View RelatedI just got a used iMac (running 10.5.8) with the metal keyboard and mouse. I unpacked the box, plugged in the computer, hooked up the keyboard and mouse.The computer screen came up. I can move around a little via the keyboard's arrow keys but the cursor will not move via the mouse. I got it to move a little by swiping my thumb across the back but that is it. I switched my older, working, keyboard and mouse to the newer machine and it didn't work there. I switched the newer metal keyboard and mouse my older iMac and they worked just fine. What could be going on with the new (but used) computer? I have tried every port for the mouse, keyboard as well as every back port but nothing moves the cursor.
Info:
iMac, Mac OS X (10.5.8), Computer was shipped from CA to NY.
mouse cursor not working properly, when i go to my hidden dock it will not appear unless i left click, and when i try and drag and drop whatever i pick up gets stuck to cursor and i have to power down, and when i go to the tool bar at top, and highlight a particular section the highlight does not follow my cursor nor will it change from file to edit to view etc. without me actually clicking each individual section, i have done 3 fresh installs, and run the boot cd live and still have the same problem running to boot cd live.
I have no idea what is causing this problem, i have run hardware test, both using memtest for mac and macs own internal test holding the D key down on boot, memtest ran with not errors, but the mac test came up with two seperate issues the first was using the quick test the second was using the extended test: 4MOT/1/ 40000003: HDD-1363 and the second was 4MOT/1/40000003: HDD-1429,Oh the machine is a intel based 20" imac, with the core 2 duo 2ghz processor, 2006 i believe and its running osx 10.5.
Info:
iMac, Mac OS X (10.5.8)
My O/S cannot find my mouse; cursor won't budge. All batteries are new in mouse & keyboard. Options?
View 3 Replies View Related