My mouse cursor is stuck on a spot on my screen. When I move it the pointer springs back to where it was stuck in a second. Can't do anything. Shut the Mini and restarted but still same problem. Cannot get to sys pref to check anything. Running the latest Lion build. Trackpad and wireless keyboard. Also tried with USB mouse with same result.
Info:Mac mini, Mac OS X (10.7.3)
I did some reading online, and know that the flashing question mark basically means that there's either a problem with the OS installation or the hard drive itself. I borrowed a friend's Snow Leopard installation CD (mine didn't come with the CD) to try to boot from it, but it refuses to boot from the CD.
The only keyboard bootup control that does anything so far as I can tell is the alt key (using a windows keyboard), which results a long delay while booting, followed by a blank screen with a mouse cursor. Everything else just ends up with the flashing question mark. If I try to hold C to boot from the CD, it sits there for 3-4 minutes with the occassional CD whirring sound, then ejects the CD and goes to the flashing question mark.
When I wake from sleep, my mouse cursor is a beachball that is NOT spinning. I can use my mouse like normal, move it, and click on things, but its still a beachball. I beleive it stays like this until the mouse is actually supposed to be a beachball (when I open a few programs at the same time and the computer starts "thinking"), then it starts spinning and after that it goes back to the normal black arror cursor.
Might be a problem from the 10.5.3 update? anyone else experience this?
I know that the general consensus here is that the Mighty Mouse is a piece of shit. That notwithstanding, I'd appreciate posters refraining from engaging in further elaborations on that concept when replying to this topic (i.e., no comments like "Buy a new mouse," please).
At any rate, I purchased a wireless Mighty Mouse about a month ago and was very happy with it until the batteries apparently died. One day the pointer simply stopped responding and the green light on the bottom of the mouse was flashing. I replaced the batteries and the mouse resumed normal operation. Then, a few days later it happened again. I have yet to re-replace the batteries and have reverted to using my now eight-year-old Logitech dual-optical mouse (possibly the finest peripheral I have ever owned). Has anyone else encountered this issue?
Is this mouse having internal hardware or software issues or is it normal for it to devour batteries at this rate? System Preferences says that Bluetooth is maintaining the connection properly, so I am ruling that out as an issue. I would just say to hell with it, and use my Logitech mouse full-time, but my wife hates it and I payed seventy goddamn dollars for the Apple product.
my USB mouse often freezes on the left corner of screen. Rebooting is not working. Sometimes the system comes backup a day later. Sometimes it does not. I tried different mice on different ports, not working at all. I found that when this issue happens, all usb ports are not working.
Info:Mac OS X (10.7.2), all usb ports are not working
I am using an Apple Wireless Mighty Mouse, and have been since i got my macbook about 9 months ago. I love the mouse, but i have noticed a lag in the cursor. At random times, the mouse cursor starts to lag. When this occurs, i will either clean off the lens or turn it off and back on. Most of the time, these alternatives do not work. I then just wait and it eventually turns back to normal.
View 2 Replies View RelatedEver since installing 10.5.7 I have been experiencing problems with the mouse cursor. On my intel iMac's primary display (but not my external display)... the mouse cursor will disappear while moving the cursor, then reappear after the movement is over, so it looks like the cursor is flickering rapidly when it's in motion. This flickering problem will happen with a normal cursor only intermittently (usually when the cursor is over a scrollbar), but it always happens when the cursor changes to a crosshairs for screen capture (command-shift-4). As mentioned above, this only happens on the internal LCD, not my external monitor.
View 2 Replies View RelatedI'm switching over from Vista so still trying to get used to snow leopard. Couple of things that are bugging me:
1) The trackpad seems to lag slightly when I select text or re-position windows on the screen. What I mean is that when I double click and drag to select some text for example, when I lift my finger from the trackpad (which should end the select procedure) and move the cursor elsewhere, text selection still happens. The only way around this is to not touch the trackpad for about a second before I can move the mouse cursor elsewhere. Is there a way to get rid of this 1 second lag?
2) When I'm typing, and want to move the key cursor over my text, when holding down the arrow keys, the cursor still moves over text very slowly. Is there a way to speed this up?
on certain web sites my mouse cursor just disappears sometimes does this happen to anyone else. huffingtonpost is on that it happens on often.
View 1 Replies View RelatedI would like to capture some videos from my screen and use them as part of a video I am going to edit. The video would be of me accessing an application, letting it run and then capturing all of this. Yet I would like it so that the mouse doesn't appear while you are doing this. Is is possible to hide the mouse cursor at will, so that it is invisible?
View 5 Replies View RelatedHas anyone had this issue upon waking up the mac, the mouse cursor isn't visible yet you can still click on things. It takes a few mins before the mouse cursor eventually becomes visible.
View 5 Replies View Relatedi have a 13 inch macbook pro running 10.6. Every so often (a few times a day) my mouse cursor will disappear off my screen. It still works because things are hilighted on the screen and I can still click things when i move the trackpad around with my finger, there is just no pointer on the screen. This only started happening this week and I have had this computer for about 7 months.
View 7 Replies View RelatedThe mouse cursor on my G4 (see specs below) is frozen. The mouse I usually use is a standard apple mouse purchased about seven years ago. I have tried another mouse (no success) and rebooted using the installation disc in the hope of a disc repair, but again no mouse cursor movement. I am at a loss as to what to do next.
View 6 Replies View RelatedThis bug has been annoying me since I bought my MBP last summer. Mavericks / Yosemite. I made a video to show what I mean - [URL] .....
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
My keyboard and mouse is not responding my 3.06 ghz 24" iMac. A day prior I ran the leopard dfu fix script and it worked fine. I was able to jailbreak my iPhone and everything was okay. Earlier today I used the comuter and it was okay. Othing seemed wrong. I turned it off and just now I tried to turn it on and the keyboard and mouse is not responding. Does anybody have a solution?
View 7 Replies View RelatedMoisture built up inside closed laptop. Screen came up when opened. Keyboard unresponsive... And computer is "searching" for keyboard or bluetooth device. After 5 or so minutes screen went blank. Don't know if it's in sleep mode or just out.
Info:
MacBook Air, iOS 5.1.1
This Imac 7.1 2ghz, 20" is less than a year old. I switched because it promised friendlier functioning especially for my wife. I use Parallels for XP/Quicken only. What drives me crazy is a 2-5 second delay for almost anything I do: scroll, copy, move cursor, any art or photo ops and TYPing. I read all the things to reduce the Pinwheel and did them. Finally I added 2 more Gigs of memory (total 4) and it made no difference. Activity monitor shows tons of free memory.
I cannot believe that I use my tiny Asus to type most of my stuff now because on the iMac I can type something then in the middle of a word, count 'one thousand 1-3 then sometimes get a pinwheel for 2 counts and it resumes typing. It does not seem to matter much if I close everything else (wow that eliminates all that handy windows stuff Apple is famous for).
I am be watching a movie on my iMac, or just do other tasks, and everything would all of a sudden freeze up on me, with the mouse cursor the only thing moving around. The system wont let me do anything, and I have to hold down the power button to shut it off.
View 7 Replies View RelatedI have funny problem, well more of an annoyance than a problem. On my MBP, after maybe a day or two without rebooting (ie. just closing the lid), the mouse cursor drop shadow disappears and the cursor gets jaggy/aliased edges (imagine the cursor from Windows XP, but black). A reboot will bring it back.
The MacBook Pro is a stock late 2009 17" - 2.8Ghz, 4GB etc. with Mac OS X 10.6.3 (this annoyance has happened since 10.6.1). I have the graphics mode set to performance as 90% of the time I use the machine, I'm plugged in.
I've tried to see if there's a pattern to it, but it's seemingly random. Sometimes it's the same day as a reboot, sometimes I go a whole week without rebooting and still have the proper cursor. It's pretty weird. I originally thought it may have related to opening the lid while on battery power, however it's happened a couple of times when I've opened the lid while plugged.
Edit: Another interesting point.... if I plug an external display in, the cursor gets back its shadow, but then when I unplug the screen, it will return to the jaggy look (until a reboot).
Is there a utility that I can use that will allow me to have the same precision and accuracy with a mouse in mac OS as I have in windows? There is a very different feel when using a mouse in OS X, and I just don't like it.
View 1 Replies View RelatedProblem: Was surfing on my Mac Mini when the cursor starts acting erratically, when I try to move it, either freezing or it jumps all over the screen. I have tried repairing permissions using disk utility, resetting the 'pram', used clamXav to scan for virus. starting in safe mode to repair permissions. Don't think it is the mouse its self, used it on Macbook and it's fine.
View 5 Replies View RelatedI just got a used iMac (running 10.5.8) with the metal keyboard and mouse. I unpacked the box, plugged in the computer, hooked up the keyboard and mouse.The computer screen came up. I can move around a little via the keyboard's arrow keys but the cursor will not move via the mouse. I got it to move a little by swiping my thumb across the back but that is it. I switched my older, working, keyboard and mouse to the newer machine and it didn't work there. I switched the newer metal keyboard and mouse my older iMac and they worked just fine. What could be going on with the new (but used) computer? I have tried every port for the mouse, keyboard as well as every back port but nothing moves the cursor.Â
Info:
iMac, Mac OS X (10.5.8), Computer was shipped from CA to NY.
mouse cursor not working properly, when i go to my hidden dock it will not appear unless i left click, and when i try and drag and drop whatever i pick up gets stuck to cursor and i have to power down, and when i go to the tool bar at top, and highlight a particular section the highlight does not follow my cursor nor will it change from file to edit to view etc. without me actually clicking each individual section, i have done 3 fresh installs, and run the boot cd live and still have the same problem running to boot cd live.
I have no idea what is causing this problem, i have run hardware test, both using memtest for mac and macs own internal test holding the D key down on boot, memtest ran with not errors, but the mac test came up with two seperate issues the first was using the quick test the second was using the extended test: 4MOT/1/ 40000003: HDD-1363 and the second was 4MOT/1/40000003: HDD-1429,Oh the machine is a intel based 20" imac, with the core 2 duo 2ghz processor, 2006 i believe and its running osx 10.5.
Info:
iMac, Mac OS X (10.5.8)
My O/S cannot find my mouse; cursor won't budge. All batteries are new in mouse & keyboard. Options?
View 3 Replies View RelatedI have a few accounts on my Mac (Mavericks) that I use to train, operating my Mac with Airplay mirroring for demonstration. While in my primary account, Airplay (AppleTV3) works fine. Until recently it also worked fine while in my other accounts (all Admins).Â
About a month ago, Airplay with the secondary accounts no longer shows the mouse cursor. I can see the effects of the mouse (Dock magnifies, apps still open, etc.), but I can't see the actual cursor moving around the screen. My primary account continues to show the cursor during Airplay.Â
I created a new user account (Admin), and the new user account also is missing the cursor during Airplay. Updated all software, restored the AppleTV.Â
Ever since I updated to snow leopard, whenever I boot into my windows partition, it loads fine I just can't type anything nor move the cursor with the mouse at all. I've tried to insert the snow leopard disc while in windows and it doesn't really do anything.
View 7 Replies View RelatedI starting having problems with my MacBook this morning. After being asleep I started using it again and I wasn't getting a responce from mouse or trackpad clicks. The cursor will still move but I can't select anything. Â I did a hard restart once and it went back to normal. After it happened again I did another hard restart and it wouldn't boot up again. I did two hard shut downs/restarts and it finally booted up again. Although it's still not responding.
Info:
MacBook Pro (15-inch Core 2 Duo), iOS 5
I have a macpro 2008 Running Lion. Mouse stops responding to left click. Restart does not always solve. Have reset PRAM and installed a clean updated copy of Lion still regular problem Â
Info:
Mac Pro, Mac OS X (10.7.3), Mouse fails even after reboot. Rese
My macbook is frozen. Keyboard and mouse not responding. No spinning beachball. Just frozen. Pressing the power button and combinations of cmd+cntrl+esc and cmd+opt+pwr yield no results.
Info:
MacBook
The mouse cursor on my iMac has a weird habit of jumping around. Eg, I'll be about to close a window, and then the cursor will suddenly jump to the bottom of the screen.This happens with both my Mighty Mouse, and a Microsoft one...
View 8 Replies View Related