MacBook
os x 10.4
120GB
Intel Core 2 Duo
2.16 GHz
1 GB
my mac was getting really slow so i wiped and reloaded the hd. it was zippy for a couple hours, then started bogging down again. i saw huge amounts of data being written to the hd when i wasn't using my computer, 10+ GB over a couple days i was only checking email. how can i find out what program is writing to my hd?
I have 1.9TB on one drive, 645GB on another; I want to copy all that data onto a separate 6TB drive....
What's the fastest way to do this? I have already begun w/ 2 cp -pR commands, running in different Terminal windows, but seem to be getting lower disk activity numbers in Activity Monitor than I was with a brief test of a Finder copy... is that possible?
Any suggestions? Also looking for a (relatively) efficient way to verify the copied data after the fact.
I use robocopy (command line copy utility built into windows) to sync ~150GB of data between multiple windows machines. I've never had any issues, it will run and check the data to make sure it is synchronized, if there are no changes it can check the 150GB in a few minutes.
Now I have a Mac 10.6 that will have a copy of the data on an HFS partition. I'm connecting to the Mac from a Windows 7 machine via file sharing in Mac to Windows. I have robocopied the data onto the Mac system. However when I re-run robocopy all the files show up as Older or Newer time stamp so it will have to recopy everything making it useless for synching just changes.
I've tried the /fft switch for use with fat32 and file systems that don't store the time as precisely as NTFS
I've tried the /dst switch to check and see if Daylight savings is messing it up.
Anyone else have this issue?
Can you suggest any utilities that you use to sync large amounts of data between mac and windows?
I was just wandering if there is any software that people use for copying large amounts of data, or whether you just drag and drop/copy and paste with Finder?
View 2 Replies View RelatedI have a 13" MBP running 10.6.2 and for some reason I randomly get Mail bringing in like 3,400 messages and i have not been able to figure our why. I have the following Mail accounts:
1. Work - this is pop and I know it can not be this account causing it as I only leave 1 day on server so there is not that many in there
2. .Mac - (mobile me) however i only have 2,784 messages in it so the numbers dont match up
3. gmail - this account only has 26 messages since i only use it for GV and syncing an Android phone
It does this very quickly for supposedly bring in that many messages and when it finished nothing has changed and i notice nothing new in my Mail accounts?
ive got a decent sized itunes library, 20,393 songs/125.5 gbs of music in the program, but over time as i have added files a lot of times id get duplicate files so i would delete those, and when i deleted them i didnt always press the move to trash button, and just for what ever reason would sometimes press the keep file button, so now at this point after doing this for a while i now have a music folder that is 168gbs of music, when i really only have 125 in itunes so is there any program or way to automatically delete those duplicates, because it would take a rediculous amount of time to go and find and delete each one individually obviuosly.
View 1 Replies View RelatedLike the title asks? How can this be done? I have my iMac and I want to transfer the large library of songs over and ethernet cable connected between the two Macs. I remember seeing this be done. How would I go about doing this?
View 6 Replies View RelatedPrinttool is taking up large amounts of CPU and System Memory resources.
Info:
iMac (27-inch Late 2009), Mac OS X (10.7.3)
I have a problem when I'm transferring files from my powerbook g4 to external hard disks such as lacie or ipod. It keeps popping up "the finder cannot complete the operation because some data in file AVI could not be read or written. (Error Code -36). This happens just for certain files, not all of them. I don't know whether the hard disk has an issue or the file is corrupted and if the file is corrupted I hope there is a program that can restore it.
View 1 Replies View RelatedWhen ever I try to move a file from an FTP server to my desktop I always get an error saying some data cant be read or written. I have tried it with like five different FTP's and I get the same error. Here is a grap of the error.
View 3 Replies View RelatedI've done a search for this and cannot seem to find a definitive solution. I've just upgraded to a larger Verbatim external drive and when I go to take files off my existing external drive across to it, it keeps coming up with the error: The Finder can't complete the operation because some data in *** can't be read or written. This only happens in certain folders. I am able to copy some folders across, but some I get this error. I've tried verifying both drives, formatting the Verbatim one for FAT32, repairing, but nothing seems to work. Some points that may be worth mentioning:
- The original external drive is formatted as MAC OS X Extended Journaled.
- Some of the folders I am having trouble with may have been originally created on a PC.
I would like to keep the new drive as FAT32, so I can use it on a PC if I need to down the road. I read something about using dot_clean via terminal, but I can never seem to get the path correct to my external drive. (The name of the external drive is MASTER HD) Would appreciate if anyone else has had the same problem could tell me what they did to solve it? Not sure why some files will copy over and some wont?
My Macbook pro wouldn't turn on. I booted to the installation DVD and installed OS X to the external drive. Once the installation was done, I was able to access my laptop without any problem and I retrieved all my files from the USERS Folder. I tried to copy my old files to the external disk, before formatting the system’s internal drive and reinstalling OS X.
However, at every attempt, I’d get “some data can’t bet read or written (Error Code -36)”. I ran a Verify/Repair Disk Permissions and this is what I got:
I am running osx 10.5.4 on a brand new macbook. I have an old, crappy external hard drive that works intermittently with a bunch of large files on it that I am copying to my new, fancy external hard drive. Problem is, more than half the time, finder will report "unable to complete the operation because some data on 'filename' could not be read or written. (Error Code -36)"
This would be no problem, as I could then just cancel the copy and try again. But Finder freezes the copy window open, and it will not close by clicking on the "x" in the copy window. The only way to try again is to relaunch Finder. I do not want to force finder to quit every time I try to copy a file to my new drive. Is relaunching finder repeatedly bad for my system or hardware? Seems like a glitch. Is there a way around this?
I'd like to transfer large amounts of data over the internet from my MacBook Air to my Mac Mini Server. Both are running 10.7. The Mac Mini Server is running 10.7 Server.I'd like to transfer 10GB + back to the server. How to setup server to better transfer files this way? Is there a way to setup FTP within OS X Server settings, or is there a way in File Sharing settings that I could accomplish this?
View 14 Replies View RelatedWhen i try to backup data or transfer large amounts of data, like 40gb or more, between drives, the process just stops without warning or explanation. It dowsn't matter when backup i use, Time Machine or WD Smartware.
Info:
iMac, Mac OS X (10.7.3)
I was running the Windows 7 upgrade advisor and it gave me a result for RAM that I wasn't expecting. My MacBook Pro has 4 GB of RAM. At least that's what I ordered, and that's what OS X says.
When I look at the RAM on Windows XP under VMWare Fusion, it tells me I have 512 MB of RAM.
Where I look at the RAM on Windows XP under BootCamp, it says I have 2.73ish GB of RAM (which doesn't even make sense).
I have a late 2009 21' IMac. it has 4 ports for ram 2 of them has 2GB in each. can I put 4GB in each of the two remaining ports? or does it need to stay consistent ??
Info:
iMac, Mac OS X (10.6.7)
Lately Safari has been hogging HUGE amounts of RAM after a while. After logging in on just this site to post this it has risen to 150MB! if I have several tabs open (2-4) it rises to about 600MB. This slows my system considerably as I only have 2GB total. Anyone have any ideas on how to fix this?
View 7 Replies View RelatedEg '4' in 'Inbox' and '54' in 'Drafts' which are not actually there? This is on Macbook pro in 'Mail'.Iphone seems synced OK.
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.7.3)
With Mac OS X Lion, System Information shows:
Chipset Model: Intel HD Graphics 4000
Type: GPU
Bus: Built-In
VRAM (Total): 512 MB
Vendor: Intel (0x8086)
Device ID: 0x0166
Revision ID: 0x0009
With Mac OS X Mavericks, System Information shows:
Chipset Model: Intel HD Graphics 4000
Type: GPU
Bus: Built-In
VRAM (Dynamic, Max): 1024 MB
Vendor: Intel (0x8086)
Device ID: 0x0166
Revision ID: 0x0009
Why is it different? How much VRAM do I have?
Info:
MacBook Pro, Mac OS X (10.7.5), MacBook Pro (13-inch, Mid 2012)
i'm getting ready to put less than 1gb on my 4 gb dvd. i want to be able to add more data later-what do i use?
View 2 Replies View RelatedWhen I create a DVD, it plays fine on DVD players, but when I insert the disc into my mac, it see's the DVD as a blank disc.
I've downloaded Mac the Ripper, Handbrake and VLC media player in the hopes that it could pull off the vob files, but nothing has worked so far.
i bought my macbook last thursday its my first mac and i love it but i have a question i thought the macbooks where suppose to hace 2gb 1066 mhz but when go to about this mac it says i have 1067 is this normal or is there something wrong?
also last night when i was about to shut down my pc i went to the little apple but there was something weird
every single thing was reapeated
sleep
sleep
restart
restart
shut down
shut down
etc
etc
what wrong?and its not there anymore
I used to be able to add files (pictures) to CD-R that was previously used. Now if I try to add more files to it, it tells me that CD can no longer be modified. Means that it was automatically closed. How can I continue adding files to a same CD without closing it after?
View 2 Replies View RelatedI recently purchased a MacBook Air. I can't figure out how to produce a document. Must I purchase iWorks separately? All the Apples and macs I've gotten before had the software already on them.
Info:
MacBook Air
I'm looking at replacing my ancient G5 tower with a new Mac Pro, and looking at the options, obviously I have to decide between the single CPU quad-core or the 2 CPU "eight-core" solution.
View 3 Replies View Relatedwhen i put my cd or dvd in the cd/dvd drive it reads the files fine but when i open toast it doesn't seem to show them.
View 5 Replies View RelatedI am trying to copy about 12000 songs from my internal HD to an external so I can wipe my drive clean and start again. The problem is that I keep getting this "disk cannot be read from or written to" every few hundred songs. The songs have come from all over, and there is no common thread to how I acquired any of them. I've actually got this error when trying to copy several different file types to an external HD and I've no earthly idea why. I'm sure the drive is riddled with irreparable errors which is why I want to wipe it, but I need to get a lot of these files over before I do so. Can anyone recommend some kind of utility that will identify and/or repair these corrupt files so I don't have to stop and start the transfer every 30 seconds?
View 3 Replies View RelatedHey how you doin? I went last night to re-sync my ipod to my PC and I got the following error box ...."ipod disk could not be read from or written to" I just synced it two nights prior to this problem, what exactly is wrong with my ipod and how can I fix it?
View 1 Replies View RelatedMy macbook keeps typing the letter ƒ instead of the letter f. Capital f is written as Ï. I'm not sure what to do.
View 8 Replies View Related
