OS X :: Can Toast Titanium Read Written Files
Jan 11, 2010when i put my cd or dvd in the cd/dvd drive it reads the files fine but when i open toast it doesn't seem to show them.
View 5 Replieswhen i put my cd or dvd in the cd/dvd drive it reads the files fine but when i open toast it doesn't seem to show them.
View 5 RepliesI have access to many microsoft software packages from my school and some classes require me to have certain software and some is PC only. So obviously i need windows on my mac. So they have Windows 7 Professional.
View 1 Replies View RelatedHow Toast Titanium lets me put a 4.37GB DVD-R in my powerbook G4, then lets me drag like 20 AVI files into the Toast screen, then when I press record it starts encoding and takes forever to encode each one, and then when it's all finished after about 12 hours of encoding... THEN is when it chooses to tell me:
"Not enough space on the DVD-R"and aborts the whole burning process.What in the HELL. Is there any way to have Toast tell you how many AVIs you can put on one DVD-R BEFORE encoding them?
I am running Toast Titanium v. 8.1 (112). When I burn a DVD from standard files, such as an AVI, it encodes the file and then burns it to disk. The last time I was doing this, I checked the disk space on my HDD before and after burning; the difference was more than 3 GBs. Where does Toast store the files the result from the encoding? Having burned a couple dozen DVDs, I have reason to suspect that there are tens of gigabytes on my hard drive taken up by these encoded files which I will no longer use.
View 1 Replies View RelatedMy Macbook pro wouldn't turn on. I booted to the installation DVD and installed OS X to the external drive. Once the installation was done, I was able to access my laptop without any problem and I retrieved all my files from the USERS Folder. I tried to copy my old files to the external disk, before formatting the system’s internal drive and reinstalling OS X.
However, at every attempt, I’d get “some data can’t bet read or written (Error Code -36)”. I ran a Verify/Repair Disk Permissions and this is what I got:
how to back up to a CD, from where to back up and how to reload the back up to the hard drive. I'm particularly concerned because it seems that I lost several months of Quicken data from my hard drive.
View 2 Replies View RelatedI had Toast 6, and it worked fine on my Pioneer DVR-112 for the last couple of years.
I just upgraded to Toast 9 Titanium, and it's now rejecting almost all the blank DVD-Rs that I try to record to.
"insert blank media."
But I know the spindle of Verbatim DVD-Rs ARE blank, and good quality.
Going back to Toast 6 works fine. It's just Toast 9 that complains.
So I've got an .iso with AUDIO_TS and VIDEO_TS folders in it. How can I burn the .iso to the DVD so that it will play back on my DVD player?
View 3 Replies View Relatedwhen I go the DVD-Video section I put all the videos I wanted in and the chapters/Menu I wanted etc.
Then it said that I had a mixture of both PAL and NTSC (or however you spell it) which I already knew and was fine with because I wanted to test out what my PS3 could read and could not between files of .mkv, .avi, and .mp4 (ironically it play/read everything but the .mp4).
I followed the directions on this website:[IRL] It didn't play in my DVD player because they say to burn it as a data disc. I dont know that if I used the Video TS option that subtitles will still work.
View 1 Replies View Relatedwhy Toast Titanium increase file size? I'm trying to put a few episodes of an anime onto a regular DVD disc. Now the file is 563.1MB, but when I put it in Toast in the DVD-Video section, it tells me that 1.99GB on 1 disc.
View 4 Replies View RelatedHaving problems importing audio files from itunes to toast. When imported the file becomes distorted and impossible to listen to . Sound file is fine in itunes but something is happening in the transition.
View 1 Replies View RelatedI bought Roxio Toast Titanium 5.0 and downloaded the 5.2.1 update so I could burn some DVDs on my iMac (which is about 2 months old). I set it to record a video_ts file from one of the DVD discs that I've ripped to the hard drive. It records the files and verifies, then it says that the DVD was burned fine. The problem is that when I try it on any DVD player, the disc will not play. It won't play in a stand-alone DVD player, on the iMac nor on my PC. I checked what was burned, and all the files were recorded fine. I've gone through 6 discs with the same result. The only time it recorded anything viewable, was when I set it for "disc copy" and even then, the entire DVD was not recorded because of some error and when I popped it in the player, the portion that was recorded was very pixelated and unwatchable.
I have a .mov file from iMovie that I would like to burn on to a DVD. I am using the latest version of Toast Titanium 8 (which I bought as an update from Toast 6 in the hope that it would fix the problem) but I keep coming up with Error messages.
View 7 Replies View RelatedI am trying to burn a Dual Layer DVD with my new MacBook Pro 15"
i have been using Toast Titanium 10.
( Brand : Memorex DVD +R DL 8x )
It keeps telling me Error after 5 minutes of burning!
What is wrong ?
Here is 2 screen grabs of the Error....... :
I just got a copy of Toast Titanium 10 and want to back up my dvds. The first one i tried said that the disc is copy protected. How can i get around this or can I? I just want to have the files so i can watch them on my computer and store them on my hard drive so i can watch them whenever wherever without the disc.
I wanted to burn a more than two hour long .avi file to a DVD using Toast Titanium 10. However, when I import the file in Toast, it says it's only 58 minutes!
View 3 Replies View RelatedI copied a cd on toast titanium 7 then dropped in a blank to make a copy. To my horror a grey-ish "curtain" descended across the monitor, dimming the screen. After a few seconds a dialog box in several languages came up "You need to restart your computer. Hold down the power button or press restart." I pressed the power button which shut it down. Started it in about 10 minutes and things SEEM fine.
View 3 Replies View RelatedI'm backing up loads of files to DVD, I dragged all the files into Toast and started burning, letting Toast organise the files across multiple DVD. On DVD 11 of 18, there were some drive errors, and Toast crashed.
View 2 Replies View RelatedToast 10 takes a while to open ... it gets to open after a bit ... I then can add files for it to burn on a dual layer DVD .... but when I press the Burn button ... the program ends up sending me continuous messages of it can not burn and repeats this message in a never ending cycle.
View 14 Replies View RelatedI have trashed toast preferences, repaired disk permissions anf have latest QuickTime, still it crashes
Info:
iMac, Mac OS X (10.6.8), 2.4 GHz intel core 2 duo
I am trying to copy about 12000 songs from my internal HD to an external so I can wipe my drive clean and start again. The problem is that I keep getting this "disk cannot be read from or written to" every few hundred songs. The songs have come from all over, and there is no common thread to how I acquired any of them. I've actually got this error when trying to copy several different file types to an external HD and I've no earthly idea why. I'm sure the drive is riddled with irreparable errors which is why I want to wipe it, but I need to get a lot of these files over before I do so. Can anyone recommend some kind of utility that will identify and/or repair these corrupt files so I don't have to stop and start the transfer every 30 seconds?
View 3 Replies View RelatedI have a problem when I'm transferring files from my powerbook g4 to external hard disks such as lacie or ipod. It keeps popping up "the finder cannot complete the operation because some data in file AVI could not be read or written. (Error Code -36). This happens just for certain files, not all of them. I don't know whether the hard disk has an issue or the file is corrupted and if the file is corrupted I hope there is a program that can restore it.
View 1 Replies View RelatedHey how you doin? I went last night to re-sync my ipod to my PC and I got the following error box ...."ipod disk could not be read from or written to" I just synced it two nights prior to this problem, what exactly is wrong with my ipod and how can I fix it?
View 1 Replies View RelatedWhen ever I try to move a file from an FTP server to my desktop I always get an error saying some data cant be read or written. I have tried it with like five different FTP's and I get the same error. Here is a grap of the error.
View 3 Replies View RelatedI've done a search for this and cannot seem to find a definitive solution. I've just upgraded to a larger Verbatim external drive and when I go to take files off my existing external drive across to it, it keeps coming up with the error: The Finder can't complete the operation because some data in *** can't be read or written. This only happens in certain folders. I am able to copy some folders across, but some I get this error. I've tried verifying both drives, formatting the Verbatim one for FAT32, repairing, but nothing seems to work. Some points that may be worth mentioning:
- The original external drive is formatted as MAC OS X Extended Journaled.
- Some of the folders I am having trouble with may have been originally created on a PC.
I would like to keep the new drive as FAT32, so I can use it on a PC if I need to down the road. I read something about using dot_clean via terminal, but I can never seem to get the path correct to my external drive. (The name of the external drive is MASTER HD) Would appreciate if anyone else has had the same problem could tell me what they did to solve it? Not sure why some files will copy over and some wont?
I have two Mac's -- roughly 2007 Mac Book Pro's. One is rather beat up. Both are running the latest 10.6.4. I got a CD with data on it from a film processing shop and put it into the Mac and the Mac eventually gave me the same prompt as you get when you put in a fresh, unburnt, writable CD. I asked the Mac to eject the CD which it did.
I went back to the shop and they could mount the CD just fine (I think they had a PC). I tried a second time on the Mac -- same thing. I then put it in an AIX system and it could read it just fine too. So, the CD is "ok" as far as AIX and Windows is concerned but the Mac sees it as a fresh new unburnt CD.
I am running osx 10.5.4 on a brand new macbook. I have an old, crappy external hard drive that works intermittently with a bunch of large files on it that I am copying to my new, fancy external hard drive. Problem is, more than half the time, finder will report "unable to complete the operation because some data on 'filename' could not be read or written. (Error Code -36)"
This would be no problem, as I could then just cancel the copy and try again. But Finder freezes the copy window open, and it will not close by clicking on the "x" in the copy window. The only way to try again is to relaunch Finder. I do not want to force finder to quit every time I try to copy a file to my new drive. Is relaunching finder repeatedly bad for my system or hardware? Seems like a glitch. Is there a way around this?
I used to be able to add files (pictures) to CD-R that was previously used. Now if I try to add more files to it, it tells me that CD can no longer be modified. Means that it was automatically closed. How can I continue adding files to a same CD without closing it after?
View 2 Replies View RelatedCan I use Toast 10.05 to convert avi files to dvd files and burn?
[G5, dual 2ghz, 3gb memory,GeForce 6800 GT]