OS X :: Insterted The Tiger Disc It Would Tell That It Was Unable To Install Mac OS X On Computer?
Jun 8, 2010
I recently purchased a MacBook 2.1 running 10.4.11, however the seller of the item sent the computer to me with a lot of his own data on so I decided to delete this and start fresh.Whenever I insterted the Tiger disc it would tell me that it was unable to install Mac OS X on my computer so I decided that the best thing to do would be to erase the hard drive, however in doing so I erased the operating system and now whenever I try to boot the computer from the disc I am faced with a folder with a question mark flashing at me.
It appears to do something when I insert the disc that my housemate got with his MacBook Pro which runs Snow Leopard but still tells me that it is unable to install OS X.
View 3 Replies
ADVERTISEMENT
Feb 7, 2009
so I have a very unique, bizarre problem. A friend brought her G4 1.67gHz 15" Powerbook to the office to have it looked at as it wasn't working properly. I took a look at it and found that one of the RAM chips was shorted out. I took it out and ordered her a new pair (since it was like $26 for 2gb, and with the one removed she was running on 512). Here's where it gets bizarre: I installed the new RAM and it was freezing regularly. I then took one out and it was still freezing regularly. I booted it from my Utilities partition (I have a bootable firewire drive set up to fix problems and recover data) and ran Disk Warrior, TechTool, and a whole heapin helpin of other fixin and optimization apps. I got it to fix all the reported errors, TechTool reports no hardware errors, everything should work perfectly. So now, the laptop boots to a blue screen. I can't boot it from a retail Tiger install disc, and I can't boot it from the hard drive, it just boots to the Apple logo, the Unix spinner, and then goes blue and freezes. So I set it as a firewire target drive and was able to do an archive/install of Tiger using my G5. It recognized and installed fine and it booted my G5. Ok, so it's not the drive. I restart and nothing, apple/unix logos then blue screen. Same with the Tiger DVD. I replace the original 512MB stick (the working one) and still same result. So finally I go back to my Firewire repairs disc and everything boots fine, all tests come out fine, drive is recognized and works fine, etc. What could cause a computer to boot, a drive to be bootable, but a computer not being able to boot on any installed drive?
View 2 Replies
View Related
May 11, 2009
I have an ibook G3 dual usb which was running Tiger but after an update to 10.4.11 I think it is, was running very slowly and the browser (i tried safari, camino and firefox) was constantly crashing. I have a back-up copy of retail Tiger on DVD as my original disc is scratched and no longer reads.I erased the hdd in hope of a clean install, but when I tried to boot from the dvd it just showed up with the flashing ? I know the disc will boot as it works in my G4 powerbook.
View 5 Replies
View Related
Aug 27, 2009
Though users of older Intel-based Macs were led to believe they would have to spend $169 to migrate from Tiger to Snow Leopard, new reports state the $29 upgrade disc will work just fine.
In his review of Snow Leopard, Walt Mossberg of The Wall Street Journal, Mossberg reveals that those who have been hesitant to upgrade their Mac will be able to take advantage of Snow Leopard's bargain price, without the need to install the intermediate Leopard operating system first.
"For owners of Intel-based Macs who are still using the older Tiger version of the Mac OS, Apple is officially making Snow Leopard available only in a "boxed set" that includes other software and costs $169," Mossberg said. "The reasoning is that these folks never paid the $129 back in 2007 to upgrade to Leopard. But here's a tip: Apple concedes that the $29 Snow Leopard upgrade will work properly on these Tiger-equipped Macs, so you can save the extra $140."
Wired also confirmed that they were able to upgrade a system directly from Tiger to Snow Leopard. In addition, it is possible to completely erase a hard drive and install Snow Leopard without a pre-existing operating system in place, enabling users to bypass the possible headaches of an upgrade and go with a clean install instead. Wired said many users upgrading from Tiger should probably consider backing up their files from Tiger and doing a clean install instead.
"Of course, the transition isn't guaranteed to be as smooth as it would be from Leopard to Snow Leopard," the report said of the Tiger to Snow Leopard upgrade, "and that's because some older, Tiger-only third-party applications need to be upgraded to newer versions that work with Leopard or Snow Leopard."
Originally released in April 2005, Mac OS X 10.4 Tiger is more than a little long in the tooth at this point, especially considering the astounding success of its follow-up, Mac OS X 10.5 Leopard.
View 39 Replies
View Related
Nov 25, 2008
I installed a new 250GB WD ATA hard drive in my 450mhz Sawtooth G4. The computer sees the drive, it works in target disk mode but nothing will install.
When I try to install Tiger from the DVD or the 4xCD set it gives an error after a minute of installing and says to restart. The Tiger disks crash my G5 as soon as I try to boot them. When I try to install Leopard via target disk mode from my G5 it says it cannot be installed on this computer.
This isn't one of the computers that has to have the OS installed in the first 8gb of the drive partition is it? I don't want to install 10.3, too much of my software isn't compatible with it. It was running 10.4 fine on the old 30gb drive.
View 5 Replies
View Related
Jan 28, 2009
I've searched google but cant find an answer to my question.
I have an external HD, partitioned into 2 volumes, where 1 volume is empty and I want to install Tiger onto this volume.
Trouble is when I boot into the install CD and try to install on this volume it says that it 'cannot install on this volume.Mac OS cannot boot into this volume.'
I found on google that when partitioning the whole ext. HD, there is an option about a GUID or something which allows the drive be bootable.
This would be useful but it would wipe my whole drive, including the other volume.
I do not want to do a clone of my int. HD, and SuperDuper! it onto the ext. HD.
View 3 Replies
View Related
Sep 26, 2010
I have an Imac 17" Intel Core 2 Duo (5,1) 2ghz late 2006 model. Just recently the superdrive has perished for what ever reason & I have read that some times if you reinstall the original operating discs that came with the computer, the superdrive may or may not come back to life.
Leopard 10.5.8 with all the updates is the current set up on the imac & I want to put Tiger 10.4.7 back on it. So I'm connecting the Imac to my Mac pro 15.4" (late 2007 model - 2.2ghz 4gb ram intel core 2 duo) via firewire & use the Imac as a target disk. I put the install disc into my mac pro with the imac connected, power down - reboot holding 'C' to boot up the Tiger install disc. The apple logo & spinning wheel appear, but then the screen darkens & a 'You must turn off your computer or hold the power switch for a few seconds appears'
Now I've tried resetting the PRAM,NVRAM & SMC also decreasing the amount of RAM there is in the laptop.But the error is always the same? However if I put leopard 10.5.6 disc in that starts ok, snow leopard 10.6 that starts ok too. But tiger 10.4.7 & leopard 10.5.1 won't start at all? How can I get Tiger 10.4.7 back onto the imac using my mac pro?
Yes the only other way is to replace the superdrive, but I'm not in a position to get it replaced at the minute & if reinstalling the original operating discs rejuvenates the old superdrive, then there's no point.
View 11 Replies
View Related
Dec 20, 2010
I'm trying to install Snow Leopard with my "Mac OS X install DVD" to my friends's Mac, I have a MBP and he has a MB, will it work?
View 2 Replies
View Related
Jun 9, 2012
replaced hard drive in my macbook and have os 10.6 install disc but the computer keeps shutting down after i choose installation disc?
Info:
MacBook, Mac OS X (10.6)
View 10 Replies
View Related
Nov 4, 2008
i have tried to re-install leopard into my macbook but it is just all a mess. i inserted leopard cd (original copy) into macbook to do a clean install to my new(to me) used macbook. the computer message after choosing language says "cannot install mac osx on this computer".
1. used disk utility to reapair disk...did no work
2. erased hd..still did not work.
3. made partition to install from external hd...now just made a total mess with computer.
4.i try to start computer from dvd drive with original leopard cd...still does not work. says cannot install mac osx to this computer...
i have macbook intel core duo 1 gig ram and enough memory.
please help i dont know what to do!!!!!
love my mac. buy i messed it up....
View 7 Replies
View Related
Nov 18, 2010
I have an aluminum macbook, from made around January 09. The issue is I need to repair the hdd using the osx install disc. The problem is that when I try to do so, boot using the disc, it just restarts to the hdd, it will not boot from the disc. I try holding c and I have tried setting the disc as the startup disc and it just goes in this never ending circle of restarting and restarting. I've never seen this before.
View 3 Replies
View Related
Nov 27, 2010
My late-2007 Macbook's hdd got screwed and I bought a new one.
Now I try to install Snow Leopard 10.6.0.0 but Macbook won't boot from the install disc.
It spins the disc a couple of seconds and then ejects it.
Key commands don't help. Startup manager won't show up if I keep pressing the option key during startup and same goes with pressing c for booting.
View 3 Replies
View Related
Aug 13, 2007
The computer asked me to log in. This is odd, because he has the computer set to automatically log in. Anyway, I input his username and the new password. The computer rejected the new password, which I am absolutely sure was spelled and typed correctly. I tried entering the password using both his short name and long name. Neither worked.
View 3 Replies
View Related
Feb 10, 2009
I bought OSX 10.5 Leopard about 3weeks ago and still have not been able to install it onto my macbook. When I put the disc in for the first time I went through the standard procedure of clicking install OSX and then restart when it restarts however it goes to the Grey screen with the apple and the spinning loading symbol and just sits there forever.
I thought it was the disc so I took it back and ended up with the exact same problem. I then thought maybe I should just use my factory disc and wipe out everything on the hard drive. It gave me the same problem as trying to install Leopard.
Then I thought maybe it was my CD/DVD drive. Nope! It perfectly played a DVD and I was able to install Photoshop CS4 through the CD/DVD drive as well.
A Month later I am stock with a Macbook that won't budge. I am no longer under warranty so I am trying to see if there is a way that I can fix this problem first before taking it to the apple store where I know I will get charged...I love Apple but I must confess this task would be easier to complete on a PC.
I tried going to disk Utility and erasing the drive and that did not work either because it doesn't give me the ability to click the erase button when I click the Hard Drive. I got this computer from my friend's sister and apparently I am finding out that she had the computer's Hard Drive partitioned and running Windows XP on it on the TIGER OS.
I am not sure if this has anything to do with it but I think it may be a factor as to why the OS disc both Leopard and Tiger (factory disc) will not write to the hard drive. I'm thinking maybe there are some permissions or something not allowing it to write to the drive or something to that nature.
My idea is to wipe out the Hard Drive completely I don't need anything that is on it I already backed it all up. But how would I do this? Is there a program I can use? Can I take the hard drive out and take it to a computer repair store and they hook it up to something erases it all? or should I buy a $40 HD from eBay for the macbook?
View 6 Replies
View Related
Aug 26, 2009
I am trying to load a clean valid copy of OSX on my older clamshell. It will take up to 10.3 and that is what I'm using. I keep getting this error " Startup Disc was unable to select the install CD as the startup disc" error (-2). This occurs after the software requests restart to start the process.
View 7 Replies
View Related
Sep 22, 2007
I just got a Power Mac g4 from my school and i dont know much about it but it didn't come with an operating system. I bought a full retail version of mac os x and pop the disk in and it will only eject the disk. I tried holding option when its installing but the computer wont recoginize the disk it will only eject it.
View 5 Replies
View Related
Jun 24, 2009
I'm sending my 13" MBP in to Apple to have a minor mechanical issue repaired and so I'm installing a fresh copy of 10.5 just for security reasons. Yeah I know, paranoid maybe, but whatever. I have a time machine backup so it's really no sweat off my back. In any case, I thought I'd just use my retail 10.5 disc, but it gave me a bunch of grief. When the computer would boot up with the disc it would just go to a gray screen and sit there.
You'd hear the CD spin up and then stop and it just sat at the gray screen. I tried holding down 'option' before the full boot and it found the CD, but when you clicked it it would just freeze. I just put in the Leopard install disc that came with the computer and it's installing just fine. I guess I'm not too worried since I have the disc that came with the computer and I'll be getting Snow Leopard as well, but it'd be nice to know my retail 10.5 disc would work regardless.
View 4 Replies
View Related
Oct 11, 2009
My Macbook is starting to get really slow. I've tried Onyx and it told me that the startup volume had to be fixed. But I can't boot my install DVD by pressing "C" in the startup.
Is there another way to repair the disk?
View 8 Replies
View Related
Dec 30, 2009
I made a backup image file of D2 LOD and im trying to install it again but the installer keeps telling me that i need to insert disc. So my question is, how do i mount this image so that the installer can use it.
Clarification: I lost the original cd so i just have this backed up image, so the image is legit.I just wanted to play this game and i dont wanna have to go buy the disk again.
View 20 Replies
View Related
May 8, 2012
I am trying to install Snow leopard 10.6.3 to my laptop from 10.5.8 version I have. I am get an error code saying I am unable to do so due to the disc not being able to be partitioned. I've tried going to disc utility to partition the disc but it says that I cannot due to the disc being a start up disc. How do I upgrade my software?
Info:
MacBookPro, Mac OS X (10.5.8), want to upgrade to snow leopard
View 2 Replies
View Related
Jul 25, 2009
my mum has a mac mini core solo 1.5ghz. those cannot read the dual layer dvd discs so therefore i cannot upgrade the leopard to snow leopard directly. is there any other way i can do it? i checked to see if remote install was on the mac mini but it dosent come with it so anyone have any tips?
View 4 Replies
View Related
Apr 13, 2012
I'm experiencing some issue when I tried to reinstall my OS. It just keeps prompting me Mac OS X cannot be installed on this computer. You have to use your Time Machine to restore..... etc. But its a brand new hard disk. I have also tried using another hard disk. Its just keep prompting the same error.I also have deleted and recreate with 2 partitions, but problem still surface. Deleted and Erase at Utilities- Disk Utility, also can't help.
Info:
MacBook
Pro, Mac OS X (10.6.8)
View 3 Replies
View Related
Oct 13, 2009
Please take pity on a confused newbie. I'm running 10.4.11 (Tiger) on a 2 GHz Intel Core 2 Duo 13" Macbook with 1GB ram. My school requires me to run Bootcamp to take my exams. They told us that we need 10.5 minimum OS and must have our 'original system discs'. The installation dics that I have are for Tiger. If I buy an upgrade disc to Leopard/SL, will that contain the windows drivers I need to install after I install bootcamp? Or do I need to buy a full installation disc of Snow Leopard (since I think you can't buy the Leopard full installation anymore)? Another issue someone mentioned is that both Leopard & SL require 1BG ram minimum, which is what I have. I'm worried the os will run very slow, but I don't really have the money to buy new ram and get it install (and don't want to crack the fragile top case) now that I have to buy the new software too.
View 7 Replies
View Related
Jun 1, 2010
I have recently tried to run Onyx which has identified a problem which requires me to run disc utilities from the start up disc. The Snow leopard disc I have only appears to offer Install option.
Q1 Have I missed something?
Q2 Otherwise should I try to run Disc Utilities from an earlier version of OSX
View 4 Replies
View Related
Jun 2, 2008
Well, my question is very simple: I have a MBA and this other laptop from work, a crappy HP which is old as hell. I'm planning to use Remote Disc to reinstall my Leopard, since the upgrade to 10.5.3 really screwed things here, and I can't figure out why. Point is: instead of running all Leopard installation thru Remote Disc, I would prefer to share Leopard disc 1 over Remote Disc and restore it to a partition on my external HD, making a clone of it, which would install *much* faster. Has anyone tried anything like this? There's any Windows program which allows me to rip a Mac DVD to a Mac partition?
View 2 Replies
View Related
Sep 12, 2009
Now that it's been out for awhile, I was curious what people's success rates have been with just getting the Snow Leopard disc and not the box set to upgrade Tiger? Or is it still recommended to get the Box Set? I honestly rarely use either the iLife or iWork suites, so that's why I was wondering.
View 5 Replies
View Related
Jan 1, 2010
I just bought a new MacBook Pro. I'm trying to transfer my files from my old computer, which uses Tiger, to the new computer. But I can't use CDs because my computer is dented and the CD drive is closed (it asks me to insert Mac OS X Install DVD into my old computer).
View 1 Replies
View Related
Oct 27, 2010
I have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 Replies
View Related
Dec 7, 2009
I'll finally be selling my circa-2005 iMac to my sister and buying one of the new ones. But I was wondering if anybody could point me to a really simple tutorial on how to restore/clean install my computer. I know how to get all my stuff off of my iMac and onto the new one. But I cannot locate the Tiger disc and only have the iMac install discs. Can I do a clean install with just these discs?
View 5 Replies
View Related
Oct 9, 2010
I have a mac book pro with a 111.8GB internal HD (only internal hard drive). current state: 3 partitions (all very close to the same size) named: "HDD_tiger", "shared" and "other". As the name implies HDD_tiger has 10.4.11 on it. goal state: I want to join the "shared" and "other" partitions without ffecting "HDD_tiger". Other data that might be needed: I don't care what the other name of the partition is but I plan to move my iTunes files from an external HD to this new > 70GB partition. I have 66GB in my iTunes folder (hence the reason it's on an external HD). Date of Manufacture: less than 8 months after Apple went to Intel processors
Processors: 2.16 GHz dual core
RAM: (maxed) 2GB DDR2 SDRAM
Start up disc: HDD_tiger
View 8 Replies
View Related
