MacBook Pro :: Can't Transfer Stuff To External Hard Drive (NTFS Formatted)
Aug 25, 2014
My Seagate hard rive is saying that it is formatted NTFS when I plug it into my new mac. I have only ever used it on a mac and it didn't ever say this when i used it on my old computer.. Im not quite sure what to do because I have no where to put all my stuff to reformat it?
Also I made sure when I bought the hard drive that it was both windows and mac compatible...
I just bought my first mac (yay!) and am trying to transfer my files off of my old pc. The problem is that I stored all my personal files on an external hard drive, which is of course formatted for windows. My mac will open it, but it is "read only." I tried plugging it back into my pc and using the Migration Assistant to transfer my files over, but it was not detected (rest of the pc was).
However, the second time I tried plugging it in to my pc, it told me it would need to be formatted first. Obviously my mac has changed something on it, and now all my personal files are on a hard drive that is unusable by either my old pc or my new mac!
I have two external hard disks, one formatted as FAT32 and another formatted as NTFS .Both cannot be seen in Finder when plug in. Only another one formatted MAC OS extended can. how to dispay my drive in the Finder (I don't want to reformat it as I have lot of contents and need to be read in my window computer.)Im running Mac OS 10.7.3 on my iMAC
when I insert my 'FAT' formatted external hard drive (Samsung M3) into my mac book pro it comes up with the error message that says "the inserted disk is not readable by this computer" and I therefore cannot access the files. The story (potential further details):Â
1. I had a problem with my mac where it took hours to load each time I turned it on, would only work when power was plugged in etc. so I had to reformat my mac hard drive (when I tried to veriify it said repair, that wouldn't work). So i'm starting with a recently reformatted, clean mac.Â
2. Before doing this I reformatted my external hard drive (whilst on windows machine) to FAT32 (so I can use on both windows and mac) so that I could back up my files.Â
3. I then transferred files from mac onto external hard drive and then also put them on a windows machine.Â
4. After reformatting mac hard drive when I then tried to transfer files back onto the mac I get the 'not readable' error.Â
I pretty much made the switch to all MAC a few months ago. I have a few external drives that i use with Media players and they prefer and work better when formatted to NTFS problem is, MACs can only read and write to FAT32. I have Windows 7 on my macbook ( though my movie collection is on my iMac ) via bootcamp, so that isn't a option. I heard and read about some programs and what not.. but what is the fastest and easiest way to transfer files from my iMac to a NTFS formatted HD? I have movies ( some over 4gb in size ) on my iMac.
I am trying to access a PC formatted external hard drive, however when I attempt to mount it I get a message saying the drive is not recognized and if I want ti initialize, which i believe if I execute will remove the files I am trying access..Is there a way to access the files on the external hard drive...it is a avi file i need to edit.
I'm having difficulty with my external hard-drive, here's the info on that one:Â
Disk Utility won't allow me to mount the drive, I've tried using a number of softwares to read it (working under the assumption that it's an NTFS drive), including Tuxera and Paragon. I have too much stored on the hard drive to empty it back onto my old computer, and so I'm not able order to re-format it.
I try erasing it again and making sure it is formatted for MSDOS and still no luck. So I try partitioning and that is also no luck. 1 part for mac, other free space because no windows option was present
I bought a new hard drive to use for both my windows and mac backup. I formatted the drive in NTFS using windows. But when connect it to my mac drive is showing only as Read Only.
I am running version 10.6.8 and the operating software is Snow Leapord. I want to upgrade to Lion but firstly I want to back-up my files just incase s*** happens. I've bought a used 500gb external hard drive and I understand it's in the NTFS (Windows NT File System) format. Although I am able to view what's on the hard drive as well as use it, for example, open photos, watch movies, I cannot delete anything on it. I could get a mac compatible hard drive but that's going to be at an extra cost.
I have a WD 640GB External drive and i would like to partition some for time machine and some for storing my files. i just have some questions:
1) If i partition the drive into 2, in the future can i join the two partitions together again? 2) does the whole external drive have to have the same file system like HFS or NTFS or can one partition be HFS + for time machine and the other partition NTFS to make it readable on windows?
I recently bought a Macbook and I have a external USB hard drive that is formatted NTFS. I copied all of the files off of external HD and pasted them on my Macbook. I slicked the external hard drive and formatted it as FAT32 so I could read & write on both a PC and Mac if I need.
Anyways, once the external hard drive was formatted I tried moving all of the files back to the external but I keep getting and error code once I paste the files on the external drive. It says: "Sorry, the operation could not be completed because an unexpected error occurred. Error code 0"
Now I'm not sure if the files are locked or what but I need help. I want to move them back to the external drive. It actually copies a few files to the external but nowhere near what all I need. They are just some .doc files that are on there
After a lifetime of owning PC's I finally purchased a MacBook Pro running OS X. I installed Parallels Desktop 5, Windows XP, and several Windows apps to have dual functionality. Now I need to write to my NTFS ext. hard drive where I backup everything. It has 800gb of space left, so it would be a shame to get a new one just b/c I have a Mac now. I first installed MacFuse and then NTFS-3G. Now when I reboot, the ext. HD won't mount at all. What have I done wrong?
I accidentally formatted my external hard drive when I was creating a Windows USB install disk with Boot Camp It was a HFS+ formatted drive with a GUID partition table and 2 partitions: one clone of my Macbook OS, and one with personal data. I'm not worried about the OS clone, I'm more concerned about getting my personal data back on the second partition.So far I've used Stellar Phoenix and Data Rescue 3. I reformatted the hard drive from FAT to HFS+ before I did these scans. Not sure if it was a good idea, but the programs wouldn't scan properly otherwise.Stellar finds my files with the original folder structure, but I can't open any of the files, even though the file sizes seem to be correct. Data Rescue partially finds the original folder structure, and also has a "Reconstructed files" section which has all my files sorted by file type and without the original file name. I really want to avoid going through all my photos, videos, etc. one by one to sort them out.
Can I still recover my files in the original folder structure? Why can Stellar find all my files basically intact, but I can't open anything? In the meantime, I'm going to try scanning with Disk Drill and FileSalvage with fingers crossed...
I can't manage to format my Seagate 500GB external HD correctly so it can be readable with my Macbook. I formatted like six times already in Windows 7 and XP to NTFS and still my macbook won't read it...only my Windows computers can read/write it. What am I doing wrong?
I am in need of assistance with backing up my macbook pro using time machine. I am running Mac OS X leopard 10.5.8. I have attempted to backup to a network share folder on a Windows machine, but the backup abruptly ends. So, I decided to attach an NTFS external drive, connected via usb. The external drive was formatted on a Windows 7 machine (not quick format); so, it currently has no space occupied. I installed MacFuse and NTFS-3G. Then, I rebooted and attached the NTFS external drive. I set the preferences in time machine to backup to the aforementioned drive. However, Console is reporting that the backup failed with error 19, and time machine is reporting that the storage location for backups cannot be found, when i command time machine to backup now.
Is there something I'm missing? I have seen at least one other thread on the Internet where a mac user was able to get time machine to work with an NTFS external hard drive. Do I need to create a separate sparse bundle image and copy it to the external drive, similar to the method used to get time machine to copy to network shares on Windows? If the ironclad rule is time machine ONLY recognizes HFS+ drives, then a sparse bundle image is a good workaround. But then what is the point of MacFUSE and NTFS-3G. What is its purpose, as it relates to time machine?
I wanted a larger Windows partition so I went into Boot Camp assistant and deleted the Windows partition, made a new one and proceeded to insert my Windows CD. It went through the installation process and i selected the right drive/partition to have a quick NTFS format. After the format, my MacBook restarted and stalled. Needless to say, Boot Camp ran a quick NTFS format on the entire drive.
Now, is there any way to recover any of the files that were quickly formatted? Is there any good software out there that may be able to recover anything?
I have an external hard drive that I use to watch movies on a Nintendo Wii and some of the movie files are over 7GB, which means when I format the drive to FAT32 I cannot copy the larger files. What are my options for getting around this problem? I have VMware fusion but I cannot easily see my external drive in XP. Is it possible to format the drive in XP and then transfer everything via VMware on XP?
I can't transfer from my external harddrive on to my mac for some reason it's unable to complete the transfer of 78.6GB of music there is over 400GB of free space on my mac as it's only one day old!Â
I just bought a Western Digital 1TB My Book Essential Edition external hard drive. I have a lot of videos, stored as disk images, from my HD camcorder on my MacBook that I want to copy onto the external hard drive for storage and also transfer to my other MacBook. The problem is that this hard drive is setup so that it will not transfer any file over 4 GB. A lot of these disk images are over 4GB and thus will not transfer. Is there any way to reformat this external HD to a system that will allow transfer over the 4GB threshold? If so, can someone please explain the process to me in as much detail as possible? If not, can someone recommend an external HD that does not have transfer limits?
I had to get a new hard drive put into my macbook pro because it was failing. So, I moved all my data onto an external hard drive so I would not lose anything. But now I cannot get iphoto or imovie back onto my computer. It says I cannot open it because it is a time machine back up. I don't want to have to purchase iPhoto and iMovie again just because I had to replace my hard drive.
I had no issues taking files from my external hard drive and transferring them to my new macbook air. However, I cannot download the photos I just added from the macbook air to my external hard drive.I do not want to erase my external hard drive as it has many many files on it from computers past. Â
