I am switching from an iMac to a Macbook. I'll be selling my iMac later. I also have an external hard drive. My iMac and Macbook both have Snow Leopard. So we're good there. With an external hard drive, how do I "switch over" from Mac to Mac? Obviously I won't want to startup from the external hard drive. So just configure Time Machine on my Macbook and restore, just hand-selecting what I want transferred after going through the OS install on my new Macbook? Both computers have a different version of iWork though. So basically, how can I switch all of my programs/files over to my Macbook without overwriting the iWork-related programs? What's the best way? Hand-select Time Machine files/applications?
I am a new convert to Mac, and loving every minute. I use a 21.5 iMac and my wife uses a MacBook. I am trying to figure out the best way up set up an external harddrive system that will automatically backup both Macs. But I am also trying to figure out if I can store and access music through iTunes for both Macs.
i am very interested in buying a Mac. But I need an external hard drive for my stuff. What are the best 1TB or higher external hard drives for a Mac Book Pro?
I am relatively new to Macs, have been using it for 5-6 months. I already know how to do everything but share folders and drives using my network connection. I have an iMac and a Macbook Pro. I have a 120GB Hard Drive hooked up to the iMac via Firewire. How can I share that Firewire External Hard Drive with my Macbook Pro? What are the steps I have to follow to connect both macs? Is there a way that I could also share my iMac's desktop files with my Macbook Pro? I already have a wi-fi connection between both computers, I just don't know how to share that hard drive between both simultaneously..
I just bought my first Mac (arrives wednesday or something).. I wanna backup most of the stuff i have on my current PC (Win 7) - and i have a external drive for that. How do i ensure that the Mac will be able to "see" (read) the backup on this disk. I'm gonna format my PC and sell it, so not being able to read my only backup would pretty much suck! The drive currently formatted in NTFS (pretty sure it was when i bought it) and it's a WD My Passport Essential..
Do Macs get slower as you fill the Hard Drive like PCs? The reason I?m asking this question is because I just transferred 40gb of files from my external hard drive (to use this HD with time machine) to my computer so I ended up with 80gb in my MacBook and I?m afraid that this will affect the performance since the HD is only 160gb. This usually happens with PCs.
Ok, was excited to get a refurb Mini today to setup as a Media Center using Boxee. I've got a 1TB WD External Drive used to store all my media, and I figured sharing that drive between the Mini and my Blackbook would be a cinch. WAY not the case. Both computers are running 10.5, fully updated.
These are the steps that I thought it would involve: - Connecting the Drive to the Mini - Turning on File Sharing - Adding the specific folders on the Drive I want shared, and setting permissions accordingly (Don't know if its relevant (or a stupid idea regardless), but I have the same user name and password setup on both of these machines as the admin) - Connecting to the Mini in Finder on the Blackbook..............
I'm running SL. I have a MBA, an iMac, and a LaCie external drive. I want to plug the MBA into the USB port on the external drive and the iMac into one of the Firewire 800 ports on the external drive. (On the LaCie, I have two backup partitions for each of the computers -- one for ? backups and one for a CarbonCopy clone of the computers.) When I connect them this way, the iMac can see the drive, but the MBA can't. The MBA will see the drive only if I unplug the iMac from the drive. Is there some sort of trick for getting both computers to see the drive at once? I don't care if they see all four partitions; I'd just like the MBA to be able to see "its" TM and CCC partitions on the LaCie and the iMac to see "its" partitions.
I just ordered my new MacBook Pro. I will transfer my current hard disk in my old MacBook Pro (Unibody, 17") to my new MacBook Pro (Unibody, 13"). Will the current OS X installation and the programs "just work" given the change in hardware (17" unibody to 13" unibody), or should I expect any problems?
I've converted to Mac about 6 months ago and I'm loving it. When I was running windows I periodically cleaned out my hard drive. I would like to do the same on my Mac, but don't see any applications?
I have a Mac at home and one at work. They are both Panthers and about 4 or 5 years old (still run great). The two machines are sort of growing apart from one and other as far as the data contained on each machine. Some is very similar and some isn't. Like I said, they are growing apart. Is there a way I could sync them by using an external drive? I would not want to lose data in the process.
I am trying to simultaneously connect a FireWire HDD to my MBP (running SL) and a PPC G4 (Tiger). It has 2 FW ports but it will not let me mount on both desktops. As I recall, there was a way to easily do this?
The default behaviour of Macs seems to be to wake up from sleep whenever a USB device is disconnected or switched off. This is not very helpful for how I like to operate. I want to keep most of my files on an external USB drive without power-down feature so that I have fast access to them at the click of a mouse button (don't want to wait for the drive to spin up as can happen frequently if your drive has the power-down feature). However, I like to sleep my Mac several times a day, and when doing so would like to switch off the external USB HD until I get back. So you see the annoyance, but perhaps there is a way to disable this wakeup feature of Leopard. I'd be happy to learn it from you!
Other than switching the backup hard drive between 2 Macs is there way the hard drive can be shared over the network for the purpose of using Time Machine? My external 1TB drive has two partitions. I'd use each one for a different computer. Right now I'm pulling the plug and switching it to the machine I want to back up. It would be nice if I did not have to do that.
I recently bought a new macbook pro which I had set up and was running just fine. I then switched my hard drive from my old macbook (2006 black) which was running snow leopard. The Macbook pro will not move past the apple logo screen while the macbook starts up and willingly installs snow leopard on the new hard drive. I switched them back hoping that the macbook pro would recognize its old hard drive but no luck. I have a feeling its the old software as i read some where that you should not install older software on your mac than what it came with.
I'd like to take one hard drive and back up 3 different Mac computers using Time Machine. The hard drive has the capacity greater than the 3 computers.
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
Looking for opinions or comparisons on performance between an internal mac hard drive vs an external firewire 800 hard drive or better. Is the performance on an internal MP drive or iMac internal drive much faster than connecting to a firewire 800 drive? I'm sure it depends on the drive, I'm wondering about apple factory installed internal drive vs say a WD external firewire 800
In other words... I have moved my music library to the external hard drive, as per an earlier thread I read here on the forums. It worked like quite well. Now that it is working perfectly, I am having a hard time leaving well enough alone. It is never a good idea for me to think too much...Can itunes be installed and run on/from an external hard drive? If so, how?
my mac has a pioneer dvd drive in it and it wont read my dvd+r dl and I am wanting to burn a mac os 10.5.dmg to it and install 10.5 but the dang thing is ejecting it. So what should I do to get it to work get the external dvd and run it from it or get a external hard drive and try it that way.
This is what im trying to do. I have a macbook with 120gb hard drive. thats not enough space from my music collection. So i was wondering how to make itunes run off a external hard drive. I looked around and found was for a PC.
I have an elderly Q950 with an external hard drive with everything backed up onto it. The external drive is a Micronet ADV1000E, with a sticker on the back saying it's Macintosh or PC compatible. I also have an iBook laptop, & PC Dell Inspiron 1300 laptop. As I have the 2 laptops, the Quadra hadn't been switched on for maybe one year. On the weekend I tried to get it to boot up (with & without the external drive switched on), but all it does is display a grey screen with an image of a 3.5" disk with a '?' in the middle. If I start up from a Norton 3.5" disk it still can't find the external or internal drive. If I try booting up with my finger in the shift key it doesn't want to know.
1. Any idea why the Quadra isn't seeing either the external or internal drive & what can I try to do? 2. Is there any way I can connect my external drive to either my iBook or Dell? At the moment I have no cables to connect the old & new - are cables available & if so any idea where from? I've looked high & low but so far no joy. 3. Is it possible to remove the hard drive from the Quadra or the external drive & put in an external drive enclosure, then connect that to either laptop? I see there are drive enclosures available which are Mac & pc compatible. This by the way would be a major undertaking for me. I'm by no means a computer dunce but would be wary of trying it.
when I went into the "get info" window for the G-Drive and switched the ownership/permissions dropdown from "read/write" to "no access". When I tried to switch it back to read/write, it would say read/write in the dropdown, but then I'd try to access the g-drive and I'd only get to the first set of folders--when I'd click on a folder, there would appear to be nothing in it. (Not sure if this is really related to my current problem.) I then tried ejecting and remounting the drive, but it didn't show up on my desktop. Stupidly, I assumed my computer didn't recognize it at all and unplugged the firewire without ejecting thru disk utility. When I did this I got the device removal error. I then plugged the firewire back in and tried repairing the disk in disk utility, but it said it didn't need repair. When I click on the G-Drive in disk utility the info at the bottom says:
Mount Point :/Volumes/G-DRIVECapacity :465.6 GB (499,973,603,328 Bytes) Format :Mac OS ExtendedAvailable : Owners Enabled :NoUsed : Number of Folders :0Number of Files :0
0 Files! I'm worried about losing all my stuff! I then tried DiskWarrior (v4.0). When I first opened it I think the info at the bottom said "This disk is a Mac OS Extended disk. This disk does NOT appear on the desktop." I'm not quite sure about that "not" b/c after rebuilding the directory of the G-DRIVE I know it now says "This disk does appear on the desktop." Anyway, it's definitely not appearing on my desktop. After building the directory it said "All file and folder data was easily located. Comparison of the original and replacement directories indicate that there will be changes to the number, the contents and/or the attributes of the files and folders." And later: "19 files (and 2 folders) had a directory entry w/ an incorrect text encoding value that was repaired." And:
I then clicked "Replace" whereupon it said it was successfully replace. But still it did not appear on the desktop even after ejecting, remounting, rebooting computer, etc.
If anyone has any advice I'd really appreciate it. I'm pretty desperate here! Thanks!
(FYI I already tried going into the Finder permissions and unclicking and reclicking the box for showing disks on the desktop. Also, I plan on getting DataRescueII in case that's necessary, but i hope it isn't)
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
