I have been trying to backup my computer for the longest time. It has been stuck on (53.4MB of 62.5MB) for about 45 minutes now. Any ideas? It is on an ethernet connection.
View 3 RepliesI just updated to 10.5.8 and my Time Machine will not backup. It is stuck at "Preparing Backup". I tried rebooting and it did not work.
View 10 Replies View RelatedI am trying to create a backup of my hard drive with Time Machine, but every time I do it gets stalled. Sometimes it gets stalled during the backup, other times it just gets stuck during preparation. The reason I need this backup is because I want to update to Snow Leopard (so I can buy Mountain Lion when it is available) and I want to be sure I won't lose any data on my computer. I am using [URL] (2 TB). I have tried using Disk Utility to make a backup but that froze too.
Info:
iMac, Mac OS X (10.5.8)
Well TM is acting up. I get an error that reads: "This backup is too large for the backup volume."
Both the internal boot disk and the external baclup drive are 1TB. The internal one has a two partitions, the OSX one that is 900GBs and a 32GB NTFS one for Boot Camp. The external drive is a single OSX Extended part. that is 932GBs.
Both the Time Machine disk, and the Boot Camp disk are excluded from the backup along with a "Crap" folder for temporary large files.
Time Machine says it needs 938GBs to backup only the OSX disk, which has 806GBs in use with the rest free. WTFFF?
This happened after moving a large folder (128GB in total) from the root of the OSX disk over to my Home Folder.
I have reformated the Time Machine drive and have no backups at all of my data and it refuses to backup!!
Why would it need 938GBs of space to backup if the disk has "only" 806 GBs in use??? Is there anyway to reset Time Machine completely???
Some quick screenshots:
i have got an Apple minimac 80gb 10.5.7 with leopard and i bought a small drive of i think it is 116gb and time machine seemed to work ok,but i kept getting msg saying full,i did an erase on small drive and in finder i can see a drive called untitled,but if i click on time machine there are no backup dates?
View 6 Replies View RelatedMy new hard disk has used up some of it's capacity on unsuccesful back up attempts.Â
Info:
MacBook Pro
I'm in the midst of moving from a 2011 imac to a 2014 - I have/had 3 TM backups  1) before the 2011 crashed and was repaired - 2) from the interim 2014 imac that I restored and updated for the new computer and 3) a "carbon copy clone" of my current drive because the apple tech made me wipe the drive and start over and it failed. Â
My computer will be here next week and I wanted to prepare.  However since the restore of the repaired 2011 NO TIME MACHINE will back up on ALL 3 drives the same error happened.  It would start fine and say it needed 17-22 hours to "create new" or "inherit" and would start fine and then freeze somewhere around 15-20GB?????   I left it more than 6-7 hours and the freeze remained. Â
Need a TM expert...... this HAS to be a Mavericks OSX issue and I do not want to wipe another drive. Â
Info:
iMac (27-inch, Late 2013), iOS 7.1.2
It just says "Preparing Backup..." It stays like this forever until I stop it and I tried re-connecting the hard drive. Why won't this work? I tried re-starting...
View 6 Replies View RelatedSo I finally got around to getting a 1tb drive to hook up to my airport extreme to do TM backups. I have ~420gb to backup on my mbp's hard drive. To avoid an absurdly long backup, I did the initial backup via usb (took the better part of the day).
Just now I was excited because it finished - I hooked the drive up to the extreme, mounted the drive so that it would show up as an option in the TM pref pane for a backup disk, and thought I was good to go. However, when I tried to get TM to do a backup so I could see it work (by selecting Back Up Now from the menubar), it took a ridiculously long time "preparing" and I saw that it was trying to create a whole new TM backup on the drive based on my computer's network name. It even had the audacity to think that the previous backup file was ~2gb, which freaked me out because I thought it had deleted it. But sure enough when I canceled the new backup and hooked it up to my mbp again, the backup was the correct size.
I did a restore from a Time Machine backup. Now my iTunes Artwork screen saver isn't working. I'd try to do a reinstall from the Time Machine again to see if it still is a problematic, but I was an idiot and deleted it and backing up fresh. I've repaired permissions. I've gotten album artwork. My music folder reads like this. User/Music/iTunes. Inside are two folders. One "Album Artwork" the other "iTunes Media." Inside the "Album Artwork" folder is "Cache" and "Download."
View 2 Replies View RelatedI have a mid-2008 (June) MBP 15". Just upgraded to SL last night. I am having a serious issue with time machine. I've been using it with the same external HD since I bought my mac last year. No issues up until I installed SL last night. This morning (my first backup since upgrading), time machine started backing up (~ 9Gb) but just stops at around 300Mb. The clock keeps spinning, but there is no change in the amount backed up.
I'm reading that other folks are having this issue as well. Has anyone figured something out?I've run disk repair (nothing found), restarted my mac & external HD (several times each), and cancelled and restarted the time machine backup (several times). Each time it freezes at a different amount (i.e. 34Mb, 284.2Mb, etc...).
I was using a 1TB drive for Time Machine; I've now upped it to a 3TB drive. The new drive is an exact copy of the old one. But when I try to do a Time Machine backup, it's been stuck in "Preparing Backup..." for over 12 hours.
Info:
Mac OS X (10.7.3), 2.5 GHZ Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
So I am sending my Air to Apple for a warranty, and of course I need to wipe the HD prior to sending it. Now how do I do a time machine backup and restore (when I get it back) of my air to have a correct copy of the previous mac without hints that his was a previous install.
The reason why I am asking this is I've done TM restores before, and they would duplicate the files. Like there would be an "old mac" folder where all the old applications are.
I recently restored my iMac from a time machine backup and it looks like Messages didn't install correctly. Basically, the app is blank, displaying no messages or options in the menu bar (see album: [URL]). Looking for a possible solution without installing a fresh OS. Â
Info:
iMac, OS X Mavericks (10.9.4)
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files. Â
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup. Â
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.Â
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
Just wanted to check if he problem was unique to my MBA (Rev B, HDD) or you notice it too ;
My Time Machine backup takes up to 6 hours to do a backup of about 30GB. And each backup size is 31.5GB everytime !!
I have the following Config - 80 GB for OSX (53GB Free) and 40 GB (10GB Free) for Win 7 on Bootcamp. Sometimes I wonder if TM making a backup of Win 7 also everytime. (Does it mean - In a way its good, that means I should be able to restore the entire hard disk from TM including Applications, Win 7 , bootcamp and all the programmes installed in Win 7 in case I have a problem ?)
But the speed should still be fast... 6 hours to do a 32GB backup is torturous specially because then I have to leave the machine alone and cannot use it.
Is there a way to make a backup of your Time Machine backup on a 2nd hard drive? I want to be doubly sure that my data is backed up!Right now I get an error saying that the second hard drive isn't authorized to copy my Time Machine data from the original hard drive I have set up as my Time Machine.
Info:
iMac, Mac OS X (10.7.3)
I just replaced my HD on my 15"MBP. The install went well until restoring my data from Time Machine. The apps came over fine but none of my data did. Yes, I checked all the boxes on the "restore from backup" menu.
Of course now when I start up time machine the backup isn't there. How do I get Time Machine to recognize the backup? I have it on two places - a time capsule and a separate external HD.
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
anyone have this problem? how can i fix it?
my TM wil not back up! It states that this backup is too large for the backup disk. The back up disk requires 573.50 GB but only 225.23 GB are available. The TM needs work space on the backup disk, in addition to the space required to store backups. Upen TM perferences to select a LARGER backup disk or make the backup smaller by excluding file.Â
Okay I;m sorry but obvioulsy I dont get this. I've never called Apple for help! I have every product they sell practically including Protection Plans I never used and no one will help me with this. My MAC is starting to have black or white screens and i can hear it running but it will not do anything so i have to reboot it, it screws up Enturage and then I have to rebuild that ( 5 times this year) anyway... I would like to back everything up- can I delete everything on the Time Capsule or Time Machine; god I dont even know what it is called Im so MAD... help if you can please. I'm going to have to take this to the genius people at the store and probably buy another computer but like before they will not save my files.
Info:
Mac OS X (10.7.3), time cap or Time Machine
There are 3 macs:
A: an old macbook (the white one)
B: a modern macbook pro (retina)
C: another modern macbook pro (TBD)Â
I am giving away B now; I expect to get C in 2 months time; I keep A with me all the time.
The goal is to migrate all of the data from B to C. I have Time Machine backups of B.
Since the transition is a long time (2 months), I need to keep working on my data during this period. For this I will use A. This will generate new files, modify old ones, ...
Since A's HDD is much smaller than B's backup, I can move only part of them.
By the way, I have totally erased A and used migration assistant to restore part of my old data from B. So, when I use A now, I do it with my same account as in B (and the same I will use in C).
How do I manage my backups in such a way that, when I will get C, I can safely move all of the data I had in B plus all of the changes and modifications that I have done during the 2 month transition?
Can I just continue to use Time Machine (on A) to update the old backups? I am afraid that some mess could be created because the computers are different (before the backups were taken on B, while now on A), even the present data are different (because now A only contains a subset of the original B data, which I do NOT want to lose), the good point is that the user is the same.
Its connected wirelessly to my network, initial backup was done by ethernet..
Time machine works fine right now, but when its time to backup, its just stuck hopelessly on "Prepairing backup.." for long and it never actually starts the backup..
I tried to repair the permissions and the disk then restart but its still have the same issue..i have the latest updateds of airport utility, time machine and the latest build of leopard, everything is up to date.
I've finally gotten Snow Leopard on my Mac Book Pro, after jumping through hoops to get there - Disc not GUID, then when it was, SL not believing that the disc was bootable.
Due to this, I nuked the hard drive, installed SL and then restored all settings and apps from my latest time machine back up, whilst physically cabled to my Airport Extreme Base Station. Whilst I left it do that, it finished the restore, and also did a couple of hourly back ups. All hunky dorey so far.
Now that I'm using wireless, I notice that Time Machine kicks in as normal to do a back up. The icon starts whizzing round, and it starts calculating the changes to back up. But that's it. It progresses up to 99%, and then just sits there. I've left it like that for several hours, to see if it's actually going to complete, but nothing happens.
Is there something I can look at to see if I can prod it into action?
My backups go to a Drobo hanging off a Power Mac G4 on FW800, physically networked to the AEBS.
I have an external 500gb drive plugged into my brand new Time Capsule. The 500gb drive basically stores my entire library of music and my iTunes points to this external drive.
Is it possible to have time machine backup all information on the 500gb drive to the time capsule, so encase the external drive takes a dump, I don't loose my entire music library? Maybe time machine is already doing this, I am not sure.
I have a MacBook Air and a Time Capsule - both from november 2011.Using Time Machine is givning me som problems.It works fine for some days, an is backing up as planned.But at least 5 times since I got the Time Capsule, Time Machine is asking to make a full Backup, and when I look in Time Machine, it says that there is no "old backup". It has been runing since november 2011.When I start a new backup, as it ask for, it takes at least 24 hours to finish - some times even longer.Is this normal? If not, what do I do?
Info:
Time Machine, Mac OS X (10.7.3)
