OS X :: Tiger On An IMac G4 800 Mhz?
Dec 4, 2005
I have an iMac g4 800mhz, 768 mb of ram 40 gb internal HD and 250 gb external HD. I plan on upgrading to Tiger this wednesday. Also, my mac has been a bit quirky over the last year or so. The internal HD seems to almost spin constantly. It spins and spins....spins down, then right back up again. Weird. Once in a while the apps act strange as well. So, I plan on doing a clean install of Tiger. Everything is backed up on the external HD.
My question is, does anybody know how Tiger will run on my system? Will doing a clean install eliminate these "quirks"? And finally, will quicktime 7 finally run smooth with the upgrade? Right now, Quicktime isn't as smooth as it used to be with Quicktime 6.
View 11 Replies
ADVERTISEMENT
May 14, 2012
I have the CD version of tiger and am trying to install it to a recently purchased iMac G3. The Installer installs disc 1, resets, but doesn't boot up to install disc 2, it simply asks again to install disc 1. The Mac for some reason will not boot from the installed software and therefore I cannot complete installation. Can anyone figure out why the mac refuses to boot from the HD in order to install disc 2?
Info:
iMac, Mac OS X (10.4)
View 4 Replies
View Related
Dec 25, 2010
I got a G4 iMac with a 1ghz powerPC and 512MB ram for Christmas - it came with Leopard.
It's not horrible slow but you can tell it's trudging along quite choppily at times (when I try to load anything in flash or youtube it can't handle it).
Would I be better off going to Tiger? I've never used Tiger before - would my experience on Tiger be horrible compared to Leopard?
View 6 Replies
View Related
Nov 3, 2009
Looking to upgrade the OS in my G4 iMac to Tiger. I've been told that I have to be sure that the OS disks are for my particular machine? Any truth to this?(Pardon my ignorance on the subject)
View 5 Replies
View Related
May 10, 2012
I just bought a G5 iMac 17" that had no hard drive. I have an old 160 gig drive to install, but there is something wrong with the optical drive and I can't insert an install disk. What I thought I could do is connect the 160 gig to my MacBookPro (OS X 10.7.4) and install Tiger to the USB drive. No go! I get a message that PPC is not supported. I tried booting from the install disk but my Mac bypassed it and booted into 10.7.4. What else can I do to get a compatible OS on the drive?
View 2 Replies
View Related
Feb 20, 2007
is it possible to install Tiger on a iMac G3 with you iPod. Im in the process of selling it & i want to do some maintenance on it, so that its nice & speedy. Can i install Tiger using my Ipod Nano 2G? If so what is the process of going about doing so?
View 11 Replies
View Related
Mar 4, 2007
I've got a flat panel G4 iMac, currently running 10.3.9. I'm having ongoing problems: frequent kernel panics, weird things happening to the display (display breaks up into a jumble of lines on occasion). I've done the usual troubleshooting: disk utility, apple hardware test, reboot in Safe. I want to try reinstalling the OS to see if this helps.
Problem: I don't have the install discs for OS 10.3.9 - about a year ago the logic board was replaced and I had the service swap in a new hard drive at that time and they loaded 10.3.9 when they did this. I don't want to buy 10.4 at this point - with Leopard coming out soon from what I understand, also want to make sure I can get the computer running properly again before I throw any more money at it. I've tried using borrowed discs to install 10.4, but I keep getting a message stating: "you cannot install this software on this computer". This has happened with 3 different borrowed install discs. Two of the borrowed discs were for iBooks, one was for a G5 iMac.
View 14 Replies
View Related
Aug 20, 2007
Is it possible?
View 16 Replies
View Related
Jul 4, 2008
so i want to install tiger on my G3 600 mhz 256 mb RAM imac that has no dvd drive.i looked around the net and found that apple used to accept tiger DVD's and exchange them for CD's for a 10$ fee but thats no longer the case....
i also found that i could install tiger from another mac with a DVD drive using firewire disk mode...so i looked around my things and found an old firewire cable and hooked both machines up (imac and my mbp) and restarted the imac holding down the t key and so then the firewire symbol shows up on the imacs screen...well from what i understand the imac's HD is supposed to show up on my mbp desktop...this never happens.And ive tried it multiple times...so i dont know what the problem is..and ive tried it using OS 9 and 10.0 the OS's the machine came with..
View 3 Replies
View Related
Jan 17, 2009
I recently acquired an original iMac G3 from my Uncle. I put a 80GB PATA drive in there, and installed OS9 without any hitches (apart from the fact that it doesn't recognise the HD because I think I have the jumpers wrong, it still boots eventually though). Anyways to my question, does this version of iMac support OSX? I am hoping to install Tiger onto it, regardless of the speed that the machine will be. I had a Graphite iMac so I'm used to slow speeds baha. I'm guessing the main problem would be in regards to the CD drive, it isn't a DVD drive.
View 24 Replies
View Related
Dec 13, 2009
I have a macbook pro 13".. the HD crashed and i had to send it out for recovery (the platter was f'd up) and the optical drive stopped working.
i have a thingy i use where i pllug in the internal HD and it becomes a USB on my imac... can i run Tiger and install it to that specific HD and format it as well? then when i plug the HD back into the macbook it will work?
View 7 Replies
View Related
Jun 8, 2010
I might be getting a iMac G3 (for surfing and maybe itunes) and I was wondering if I should put tiger or panther on it? I had tiger on my iMac G4 before it died and I loved it. I was used to leopard before though (my imac G6). I don't know the processors or anything yet... but since I'm getting two of them for free I'm not really complaining. How much iMac G3 suck. I think they are adorable
View 13 Replies
View Related
Jul 19, 2010
I have an imac g5 2.1ghz (isight version). The previous hdd completely broke, so with great struggle I managed to open it up and put in a 500gb hdd, I'm now looking to fresh install OS x. I put tiger in the imac and hold 'c', it boots to a grey screen with a folder and an exclamation mark. I put the disk in and hold the option key, it goes to a menu where an hour glass appears for about 3minutes before my tiger install disk is found. The install disk has an image of a disk with a small cross in the bottom right corner (i thought it was supposed to have an image of cd itself, but at least its recognized) I click the cd to install and it goes to a white screen with the apple logo, after a brief minute, a spinny wheel appears and spins for about 3-5minutes.
The apple logo then changes to a cancel or stop sign but the spinny wheel is still spinning below...I left it for about 40minutes and it didnt go any further. I've tried several times with the same result, I've also created a bootable usb with tiger on it and had the same result after using a command on the open firmware comand line to boot the usb, a friend tried to create a usb with leopard on it, but after trying to boot it..i get a message saying "Load-size is too small" Here are some pictures (click the tabs to see all 4) [URL]
View 1 Replies
View Related
Mar 7, 2012
I just bought a used iMac g4 with the following specs: 1.25 ghz, 160 gb HD, 1 gb of ram, with a 20" screen (USB 2.0). It has OS X 10.3.9 installed. I have retail copies of tiger and leopard. The problem is that I can't get either to install. When i load the disk, the computer restarts, but then returns back to home screen. I've tried holding down "c", but that does nothing for me. I've also gone to start up disk in utilities, but all that is listed on there is my G4 hard drive and "network". The superdrive isn't listed on there. I know the super drive works; i've used it several times and i used it to open up the install disk. What am I doing wrong.
Info:
iPad 2, iOS 5
View 4 Replies
View Related
Apr 27, 2012
After installing osx 10.4.11, boot time has increased. Sometimes it will not boot at all, but when at main screen, folders and some applications cannot be opened. Ive been trying to install an older os, but it will not allow that. how to format and start over fresh.
Info:
iMac, Mac OS X (10.4.11)
View 1 Replies
View Related
May 20, 2012
I upgraded an iMac G5 to Tiger. Safari crashes often and does not support many new web sites, particularly those requiring Flash. I have tried Opera and Camino both of which have problems when Flash is required.
Info:
PowerMac, Mac OS X (10.3.x)
View 1 Replies
View Related
Dec 22, 2008
My MBP came with Tiger when I got it almost a year ago. I upgrade the Ram to 4gb a few weeks ago. If I put Tiger back... Would it run better?
View 10 Replies
View Related
Dec 7, 2009
I'll finally be selling my circa-2005 iMac to my sister and buying one of the new ones. But I was wondering if anybody could point me to a really simple tutorial on how to restore/clean install my computer. I know how to get all my stuff off of my iMac and onto the new one. But I cannot locate the Tiger disc and only have the iMac install discs. Can I do a clean install with just these discs?
View 5 Replies
View Related
Jan 28, 2010
I have an iMac G5 17" with 2GHz PowerPC G5 processor , originally had 512 MB RAM and has been upgraded to 2Gb RAM. The HD has been erased apart from the Tiger OS. I assume there is now 1Gb RAM in each slot ... not sure if the original 512 MB was split between two slots or if it was all in one slot. Have been using OS Tiger 10.4 up until now.
Recently I bought a RETAIL edition of Leopard 10.5.1 to install ( the one with the big X on the front) but after 10 minutes of the installation got the message "Install Failed ... Source Media Disc damaged" . I previously tried another Leopard installation disc and got the same message. I think it's unlikely that both installation discs are damaged; they are both new and came from reputable sources. I can reinstall Tiger without any problems. I have tried erasing the HD volume using Disc Utilities at the initial install stage but still get the same message .
A colleague has now advised me there have been problems with some iMac G5 machines with upgraded RAM when trying to install Leopard ... the Leopard installation disc does not like upgraded RAM.
Before I try and source some RAM to the original spec. ie 512MB, and then try again with Leopard, can anyone advise me if it might be worth taking out just one of the existing 1 Gb RAM modules ( I assume there are two there, I dont know for sure because the upgrade was done by a Mac Repair Shop ) and then trying the Leopard Install with just 1Gb RAM ? Or do I need to go back to the original 512Mb module(s) ?
View 4 Replies
View Related
Jun 5, 2010
I know this concerns an older machine, but I was hoping to get some solid advice on this subject. I have retail copies of both Tiger and Leopard for my G4, and my OWC order just came in the mail, and after tearing it down, cleaning it up, and throwing a new 160Gb drive and 1Gb of memory into it, the machine is feeling extremely responsive under Tiger. My question is thus: everyone seems to think Tiger's days are numbered, which I can understand when you consider it's age. But how numbered are numbered? Safari and iTunes are still supported up to the current versions, Camino is still supported on 10.4 so when Firefox drops Tiger support I'm not without a Gecko based browser, and the other software I plan to use on this machine (iLife 06, OpenOffice, JDarkRoom and some old games, primarily) are all still good for Tiger.
My primary concern stems from the web browser issue, but more importantly, internet security on this machine. It's on a wired connection behind an AirPort Extreme so I don't know how worried I need to be, but last I checked security updates are not coming down for Tiger anymore from Apple, thus would the iMac become a potential target running Tiger? I don't want to be running bare arsed to the wind, if you'll pardon the expression. So I was hoping someone with a better understanding of software security could explain differences between Tiger and Leopard and wether or not that's a huge deal. I'm tempted to stick with Tiger, because now that the upgrades are in, it's lightning fast. Almost as fast as the MacBook fast, which is impressive from an eight year old machine.
View 7 Replies
View Related
Jun 19, 2010
I have an iMac G4 running 10.4.11. (not intel). When I turned it on today, it was all pixilated, little white squares in between the colored ones. I can hardly make out what is on the screen so I can?t really choose anything using the mouse. Everything else seems normal except for the the screen.
View 1 Replies
View Related
Jun 30, 2008
I recently did some work to a 15" 700mhz G4 iMac I got as a gift. I put in a new hard drive, DVD burner and an airport card. Now I'm at the point where I need to install Tiger. I have the original owner's disks, but the only form of input I have for the iMac is an old USB keyboard which was used for the PlayStation 2.
I tested the keyboard on my MacBook and found that it works fine, but only after I had to run a test to recognize what kind it was. I'm pretty sure that since I can't plug and play with this keyboard (without running a test) I won't be able to use it to install Tiger.
So this is where I'm stuck. Is my problem as easy to fix as borrowing a more modern, made-for-a-computer keyboard? And if so, does it have to be from Apple, or will a Logitech or Dell work nicely?
View 3 Replies
View Related
Feb 2, 2009
I had some great last night regarding the need to get a "Black" retail disk in order to install Tiger onto my iMac, I have searched on ebay and have found some grey disks which read - "For Mac Computers" on the left hand side. In small print at the bottom they have 'Mac OS version 10.4.10, AHT version 3a133, disc version 1.0, 2z691-6089-A'
View 3 Replies
View Related
Nov 4, 2010
ive got a Imac 17inch 1.0ghz with 215mb ddr ram. anyways, as Sheepy suggested, i upgraded her to a nice speedy 500GB 7200 Sata drive and dropped 1.5gb ram into her...... but lets take a step back. when i got her, she was full of dust and had tiger on her.. no dramas, tiger is good. anyways, i wanted to do a reinstall of tiger, and so grabbed my tiger retail disk and started her up, no dramas there either, ran disk util, repartitioned (the old disk) and started to install. the install never finished and then it just rebooted after about 80% through... The reboot came to the disk flashing with the osx face and a question mark. I try a few more times, with the same result, and also with Leopard, also with the same result, but the leopard install actually tells me after about 80% that "Install failed" try again? anyways, so i think its a shagged optical drive. i have a few lying around and i need to get in there anyways to upgrade the hard drive. installing the HD and the new Optical drive went fine, all works well.. and while i was there also installed 500mb ddr400 stick in the main memory non user slot. close her up, checked the heatsink matchup spots and there dry as a nuns nasty.. theres no paste on them, but kinda like a pad.. (which isnt even sticky either) anyways, i stick em back together (without) cleaning the pad stuff nor with applying any paste and boot her up. I insert the leopard disk to istall and it all goes fine, i re-partition the newspeedy 7200rpm sata disk and start the install. and again.... gets to about 90% and reboots. flashing smily face with alternating question mark.
View 9 Replies
View Related
Nov 27, 2010
I was wondering how would I do a system restore on my Leopard upgraded (from a Tiger OS) iMac? I have done several google searches and i keep getting various answers (which there are different ways but I just want to restore my iMac to factory setting) Would I use my leopard or tiger disk, and how would I go about doing a system restore? What I wanted to do was do a system restore on my mac and upgrade to Snow Leopard. There are alot of scattered unimportant photos, movies, and games on my mac and it feels like a system restore would save me alot of time.
View 1 Replies
View Related
Apr 24, 2009
how to keep my Tiger applications (relatively) functional when I upgrade to Leopard. I have Carbon Copy Cloner. The question(s) is/are:
1. If I make a selective backup, what folders other than Applications to I choose from my current Tiger HD?
2. Once I know which Folders to backup, can I save as a dmg?
3. If I can save as a dmg, how do I restore the Applications to the Leopard system without running into "issues."
View 3 Replies
View Related
Dec 3, 2009
I just ordered a new iMac and I'll be upgrading from a 1GHz TiBook with Tiger on it. I have some important music software that I'm not 100% sure will work with Snow Leopard, but my understanding is that it's already ok for Universal Binary. So I had the thought that maybe I could put Tiger on the iMac and dual boot. I've never dealt with a dual-boot system before, other than a couple times when I played around with Classic Mode when I still had Jaguar and/or Panther.
View 12 Replies
View Related
May 16, 2010
My iMac is fairly old. It's one of the white ones that has the isight and mic. I don't remember the generation. For basic typing and internet needs it's still runs great! However since I updated to snow leopard I've found alot of my software isn't compatible, thus I want to revert to tiger. Atleast with Tiger my software works.
View 8 Replies
View Related
Dec 27, 2007
Does anybody know if there is a USB parallel adapter that would work for my HP LaserJet 2100 to hook up to my new iMac?i read a couple of recommendations for other models, but not specific for this my printer and mac. They are all around $40 with no free shipping, so I would hate to spend money on it, and it not working, and i could have just invest in a new printer.Thanks for any advice.
View 6 Replies
View Related
May 18, 2008
Since I do development, I want to keep my iMac G5 at 10.4.11 (Tiger) while having 10.5.2 (Leopard) on an external drive for booting and customer support (in the meantime anyways - at some point, I may move the internal to Leopard and keep a version of Tiger on the external drive for customer support).Sounds none too difficult to achieve this. Attach external drive, insert installation CD, and follow instructions.
One thing that alludes me is the best way to make the applications available on the external Leopard boot. Can I just run them from the internal drive or will they need to be copied/installed on the external as well? Any really clear and useful resources on this type of thing?
View 2 Replies
View Related
