OS X Server :: Tiger / Leopard And External Hard Drive?
Feb 8, 2008Can Tiger or Leopard server be installed on an external hard drive?
View 7 RepliesCan Tiger or Leopard server be installed on an external hard drive?
View 7 RepliesI just purchased a free agent go 500gb and tried plugging it into my powerbook g4. It was detected but i tried to mount it and failed. I then unplugged the external hdd. Now I plug it into my Mac and it does not detect the drive! Here is what is written in the log.
Mount of "disk1s1" failed
Verify and Repair disk "disk1s1"
** /usr/local/bin/ntfsfix has been disabled because of volume corruption issues.
** If you still want to try fixing your volume, use /usr/local/bin/ntfsfix from the command line...
Error: The underlying task reported failure on exit
Disk Utility stopped repairing "disk1s1" because the following error was encountered:
The underlying task reported failure on exit
1 non HFS volume checked
1 volume could not be repaired because of an error
I then reformatted the drive on my windows to ntfs (it came pre-formatted in NTFS). I plugged it in but the same thing still happens! Btw all this is done with macfuse + ntfs-3g. I have another external hard drive written in ntfs and it reads fine on my mac.
Having been burning off my photos onto CDs for the past few years, I have been told it would be better to back them up onto an external hard drive (to speed up my computer and to have another back up... I am a heavy, heavy photograph user). My questions are:
1. Is it possible to completely back up my hard drive, and then use this hard drive in an ongoing capacity (sorry, I don't know the technical term!) on a daily basis using photoshop/bridge? Would this be incredibly slow?
2. What does partitioning (a word I've stumbled across in my googling) do/is this how I should be doing the above? My main objective, other than having an external back up, is to take 'bridge' and all my photographs off my internal hard drive.
For the moment I have my OS back up (10.3.9 )cloned to an ext FW HD. I have a 10.4 install or unpgrade disc (not sure which, nor if the disc is any good and would prefer not to risk screwing up my int.HD). Could I install Tiger directly to my ext.HD, thus being able to use the two systems depending on where I boot from. (if the install works?) Asking this because I'm not sure if I have enough free space on my Int HD (7GB) to do an Install and Archive, where as on my Ext HD I have about 11GB free space on the partition. Then if it all works could I CCC it back to my Int.HD?
View 13 Replies View RelatedMy system is MacPro 2009 with 10.6.8 server and Apple RAID card. Last week, RAID util just notified me of one drive is not viable, so i decided to replace the drive today. The configuration of my system is... There is an Apple Raid Card for HW Raid system Bay 1 = 640 TB drive with Mac OS X 10.6.8 server installed Bay 2, 3, 4 = 1.5 TB drives set up as RAID 5 below is what I did to replace the degraded Bay 4...
1. I shut down the system
2. replaced the corrupted drive with the new hard drive
3. tried start the machine again.Now my machine refuses to start up with the blinking question mark... I guess that the system fails to recognize the new drive or cannot find the system files...
4. So I put back the degraded drive...
5. The machine still won't start...
6. I tried to use the 10.6 server installation disk to boot up the machine to check if I can fix the system via disk util; but, everytime I do this, I got kernel panic...
7. resetting PR Ram didn't help, cannot boot up via safe mode as well (since the system file is not accessible now, I guess...).
8. booting via 10.6.2 server installation DVD still gives me kernel panic...
Why would my system corrupt by just replacing one degrade drive? The Mac OS X is not even the part of the Raid system... How am I supposed to fix this issue with out the installation disk?
Info:
Mac Pro, Mac OS X (10.6.8)
I have successfully connected a couple of times to a firewire external hard drive connected to my dad's iMac over the internet (AFP server) for the purpose of backing up some files, but now it doesn't show up at all as a volume when I connect to his iMac through finder/go/connect to server. I don't believe that any settings were changed, so don't understand why it isn't showing up. Currently when I get info on the drive 'shared folder' is checked, everyone has permission to read and write and 'ignore ownership on this volume' is checked and file sharing is enabled in system preferences/sharing.
View 2 Replies View Relatedwhen you have TC or AEBS and have a usb hard drive hooked up to it. What is the difference between going to Finder and doing a Connect To Server to map the drive versus having it show an AirDisk?
Somehow I just cannot have my external drive show up as an AirDisk.
Is it possible to install Snow Leopard from a disc image on an external drive?
View 7 Replies View RelatedLooking to upgrade to Lion but want to back up to external hard drive first. I have OS X 10.6. Time capsule vs another plug in? I already have wirless via internet service so is Time capsule worth the $ vs another plug in product?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
I have an external hard drive which I first used with my pc. It is formatted for NTFS. Now with my new MBP, I want to back up data, and I am having no luck. The external hard drive is a Verbatim brand, 500GB. On their website FAT32 download dosnt work! I have tried disk utility with no luck. What am I missing?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
in mac book air how can we use external hard drive as storage of actual hdd.
View 3 Replies View RelatedI am looking at getting an external hard drive ...but before that, someone suggested i could use the second internal hard drive...but how do i find out if i do?If i don't, can someone recommend a good external hard drive?
Info:
iMac, Mac OS X (10.5.8)
I have new folders related to the ex.hard drive that call for further steps (i.e. tabs that ask to Back Up Files or Set Up Drive).
Does this mean there are 2 different kinds of backups? One to TM and one to the external hard drive?
Info:
iMac, Mac OS X (10.5.8)
Can i Boot Leopard From an External USB Based Harddrive ?
the harddrive is powered with an external power supply and is not bus powered...
This is a major issue for me, as I feel like I'm going to end up damaging my hard drive.
I am downloading a legal torrent to my external hard drive, however when I quit Transmission and try to eject my external drive, nothing happens. Snow Leopard doesn't even say it is in use like it is meant to. It just does nothing to eject the drive.
So I end up having to yank the USB plug out.
What gives? It ejects normally as long as I don't download to it.
I have no id� whats wrong, I want to install Snow Leopard(from the external) on my Core2duo Macbook pro, which is running Leopard at the moment.
I have a Snow Leopard image, and I have used Disc utility to partition the external hard drive (GUID), and I assume the partition and install went well on the external, because in Disc start the external appears as OSX 10.6.
Then the problem: The macbook wont boot from the newly made external it just gives me this sign (of course without the colours).
I have tried to start the macbook normal, and with the option key held down were the external pops up.
I have also tried to chose the external in disc start and reboot with no luck.
I have tried to start the Snow Leopard install(external) within Leopard where the install start fine, but when it reboots and wants to continue the install, the sign appears.
The external harddrive is a 5400rpm 40gb 2,5" which is only powered by the usb port maybe thats the problem?
How to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion?I would like to use the external on a permanant basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
Has any one used Disk Repair on an external hard drive? Does it erase everything?
Info:
Mac OS X (10.6.8)
How to adapt an external hard drive with Snow leopard (from my sold Mac Pro) to my Mac Book Pro with Lion? Any hints on where to start? I would like to use the external on a permanent basis as it has 2T without deleting a lot of the programs.
Info:
MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
When I was copying my picture folder to external hard drive I stopped it now I dont see my orginal files on my computer. Say hidden files
Info:
MacBook Pro, Mac OS X (10.5.8)
I've been having this problem for a while now and its only with images and videos when i try to open any picture or video this msg comes up "The file couldn’t be opened because there is no such file" and i can only open it if i copied the file from my hard drive to my computer.when i open the info for the same picture (one in on the hard drive and one my computer) the one on the hard drive has nothing under "more info" while the one on my computer has a lot of details under "more info" .
Info:
MacBook, Mac OS X (10.6.8)
I have installed my hard drive from a previous but terminally I'll iMac that was running Snow Leopard into a Sata to USB enclosure. This is displaying on the desktop of my new iMac running Lion as an external Hard drive,also system preferences sees it as a start up source.My question is , is it safe to restart into Snow leopard without causing a kernel panic and if it does boot will it be fast enough to use as it as a USB drive.
Info:
iMac, Mac OS X (10.7.2)
I went to make a copy of an important drive and accidentally re-formatted it (re-formatted mac journaled, originally mac journaled). The drive contained a bunch of important disk image files which I need to retrieve whole. I'm fairly confident that the files are still there and only the table information got overwritten, as the re-format took about 30 seconds. None of the recovery software I've seen however, can retrieve .dmg files, or such large files (these are up to 32 gb each in size).how I can retrieve these disk image files?
Info:
Mac OS X (10.6.8)
how to partition a hard drive, so I can boot a my Leopard image-file from a separate partition. who has enough patience & time to guide me through to complete this common task. I did the follow things so far to make a separate partition for my disk-image (Leopard Installer):
1. Launched Disk-Utility on Tiger 10.4.11 OS X.
2. Clicked on my hard-drive (149.1 GB).
3. Selected "Partition" in that menu (seen above the Volume Information).
4. Selected "2 Partitions" from the "Volume Scheme drop-down menu".
I admin a network of Macs that use a 10.3.9 based OS X Server machine as a backup server. There is an iDisk account the server uses for iDisk backups and once a month I run a manual full back to CD. Tonight, the CD backup failed to run since the boot volume was basically full. Upon further inspection, I learned the boot volume is 6GB on a 20GB drive. So, I'm looking to possibly replace the hard drive. I'm also considering replacing the entire server with more modern hardware but that's another discussion.If I were to replace the 20GB hard drive in the server now with say a 60GB (we're talking PATA/IDE here) what would be the best way of doing it? We're talking about the boot volume now so I would need to move the OS and MBR and everything to the new drive.
View 7 Replies View Relatedi was wondering if it is possible to install snow leopard without a superdrive or the remote disc utility, but from an external hard disk drive which the snow leopard files have been put on.i have already googled to the end of the world. no success so far.
View 12 Replies View RelatedI have a HITACHI touro desk 3TB external hard dive connected to my iMac OS X version 10.6.8 Every time i start up the system it stays on a grey screen until I unplug the usb of the external hard drive then the system boots up normally. I have tried connecting different usb cables, plug in to different usb ports, and nothing works. I have other external hard drives and they don't give me any problems. is a pain plugging and unplugging the usb cable.
Info:
iMac, Mac OS X (10.6.8)
Does anyone know if I can partition a hard drive to put Tiger on the new MBP along with leopard. I want to maintain funcitonality of my old Minolta Film Scanner that only works with Tiger.
View 1 Replies View RelatedI have an iMac Intel Core 2 Duo running Tiger. What I would like to do is install Lion on an external hard drive and have the ability to boot up using either Tiger or Lion as the occasion arises. Reason being, I have some software apps that would no longer run on anything higher than Tiger and would require $1200 worth of upgrades. While I plan to eventually make such upgrades (and perhaps buy a new Mac to put it all on), for now I'm seeking an interim solution. In short, I want to take advantage of what Lion has to offer in the way of increased speed and flexibility (especially with internet surfing) while at the same time being able to boot up part of the time in Tiger to continue to run my older apps when needed. So, can it be done? Install Lion on an external HD? Or do I need to install Snow Leopard first, then upgrade to Lion? Or is none of this possible without buying a new computer and just keeping my old machine to run Tiger with the older apps?
Info:
iMac 2 GHz Intel Core 2 Duo, Mac OS X (10.4.11), 20-inch flat panel, 1 GB 667 MHz DDR2 SDRAM
Ok, this is the setup: got an external hard drive hooked up to an airport extreme via USB. I have a macbook that's a few years old with the intel core duo processor and running OS 10.4.11.
I want to be able to see/backup to this hard drive wirelessly from my macbook while on my home network. Basically, everything I've found online makes it look like I have to have my extreme on an 802.11n connection or whatever, which my macbook isn't capable of (intel core duo processor), right? The reason I say this is that all the instructions on how to turn this on circle around options that I don't see in my airport admin utility program.
So is this possible, or am I gonna have to get a new macbook before I can do this. If I get leopard or snow leopard would I be able to do this with time machine, or do I need to be able to do 802.11n for that, too?