OS X :: External Hard Drive Does Not Appear On Tiger
Jan 17, 2009
I just purchased a free agent go 500gb and tried plugging it into my powerbook g4. It was detected but i tried to mount it and failed. I then unplugged the external hdd. Now I plug it into my Mac and it does not detect the drive! Here is what is written in the log.
Mount of "disk1s1" failed
Verify and Repair disk "disk1s1"
** /usr/local/bin/ntfsfix has been disabled because of volume corruption issues.
** If you still want to try fixing your volume, use /usr/local/bin/ntfsfix from the command line...
Error: The underlying task reported failure on exit
Disk Utility stopped repairing "disk1s1" because the following error was encountered:
The underlying task reported failure on exit
1 non HFS volume checked
1 volume could not be repaired because of an error
I then reformatted the drive on my windows to ntfs (it came pre-formatted in NTFS). I plugged it in but the same thing still happens! Btw all this is done with macfuse + ntfs-3g. I have another external hard drive written in ntfs and it reads fine on my mac.
View 2 Replies
ADVERTISEMENT
Sep 11, 2010
Having been burning off my photos onto CDs for the past few years, I have been told it would be better to back them up onto an external hard drive (to speed up my computer and to have another back up... I am a heavy, heavy photograph user). My questions are:
1. Is it possible to completely back up my hard drive, and then use this hard drive in an ongoing capacity (sorry, I don't know the technical term!) on a daily basis using photoshop/bridge? Would this be incredibly slow?
2. What does partitioning (a word I've stumbled across in my googling) do/is this how I should be doing the above? My main objective, other than having an external back up, is to take 'bridge' and all my photographs off my internal hard drive.
View 3 Replies
View Related
Jan 29, 2010
For the moment I have my OS back up (10.3.9 )cloned to an ext FW HD. I have a 10.4 install or unpgrade disc (not sure which, nor if the disc is any good and would prefer not to risk screwing up my int.HD). Could I install Tiger directly to my ext.HD, thus being able to use the two systems depending on where I boot from. (if the install works?) Asking this because I'm not sure if I have enough free space on my Int HD (7GB) to do an Install and Archive, where as on my Ext HD I have about 11GB free space on the partition. Then if it all works could I CCC it back to my Int.HD?
View 13 Replies
View Related
Feb 8, 2008
Can Tiger or Leopard server be installed on an external hard drive?
View 7 Replies
View Related
Feb 16, 2009
how to partition a hard drive, so I can boot a my Leopard image-file from a separate partition. who has enough patience & time to guide me through to complete this common task. I did the follow things so far to make a separate partition for my disk-image (Leopard Installer):
1. Launched Disk-Utility on Tiger 10.4.11 OS X.
2. Clicked on my hard-drive (149.1 GB).
3. Selected "Partition" in that menu (seen above the Volume Information).
4. Selected "2 Partitions" from the "Volume Scheme drop-down menu".
View 4 Replies
View Related
Apr 27, 2009
Does anyone know if I can partition a hard drive to put Tiger on the new MBP along with leopard. I want to maintain funcitonality of my old Minolta Film Scanner that only works with Tiger.
View 1 Replies
View Related
Mar 5, 2012
I have an iMac Intel Core 2 Duo running Tiger. What I would like to do is install Lion on an external hard drive and have the ability to boot up using either Tiger or Lion as the occasion arises. Reason being, I have some software apps that would no longer run on anything higher than Tiger and would require $1200 worth of upgrades. While I plan to eventually make such upgrades (and perhaps buy a new Mac to put it all on), for now I'm seeking an interim solution. In short, I want to take advantage of what Lion has to offer in the way of increased speed and flexibility (especially with internet surfing) while at the same time being able to boot up part of the time in Tiger to continue to run my older apps when needed. So, can it be done? Install Lion on an external HD? Or do I need to install Snow Leopard first, then upgrade to Lion? Or is none of this possible without buying a new computer and just keeping my old machine to run Tiger with the older apps?
Info:
iMac 2 GHz Intel Core 2 Duo, Mac OS X (10.4.11), 20-inch flat panel, 1 GB 667 MHz DDR2 SDRAM
View 7 Replies
View Related
Sep 3, 2009
Ok, this is the setup: got an external hard drive hooked up to an airport extreme via USB. I have a macbook that's a few years old with the intel core duo processor and running OS 10.4.11.
I want to be able to see/backup to this hard drive wirelessly from my macbook while on my home network. Basically, everything I've found online makes it look like I have to have my extreme on an 802.11n connection or whatever, which my macbook isn't capable of (intel core duo processor), right? The reason I say this is that all the instructions on how to turn this on circle around options that I don't see in my airport admin utility program.
So is this possible, or am I gonna have to get a new macbook before I can do this. If I get leopard or snow leopard would I be able to do this with time machine, or do I need to be able to do 802.11n for that, too?
View 2 Replies
View Related
Jan 26, 2010
I have an intel iMac (non-aluminum) without an operating system. But there are lots of important files on the iMac's hard drive. Can I install OS X Tiger on it without erasing any files, and still have them be accessible on the computer? If so, how?
View 1 Replies
View Related
Jan 31, 2012
Would like to sell my old iMac, but have yet to figure out how to wipe it clean of my files, etc.. Have old operating system of tiger 10.4.11 IMac is from 2006. Do not have OS X install disc anymore.
Info:
iMac (24-inch), Mac OS X (10.4.11)
View 1 Replies
View Related
Feb 22, 2010
I'm fairly new to macs and am having some problems. Here's the situation:
I've got a 3 year old 13" Macbook - 2.1 Intel Core 2 Duo, 1.83 Ghz, 512MB memory, 60 GB hard drive - I bought it from
Apple directly - it was a ""reconditioned"" one from the factory.
It has worked fine for 3 years, but lately has been getting slower and slower (most programs), and even the home screen has been acting weird, and loading up funny, if at all sometimes, and I get the "spinning beachball of death" much more often and/or for longer periods. I have all my files copied elsewhere, and I just figured I would start over and reinstall the 10.4 Tiger OS that came with it - I have the original grey install/restore DVDs.
In case it matters, the two install/restore DVDs read:
mac os version 10.4.8
AHT version 3AA18
disc version 1.0
22691-5967-A
So here's what I've tried so far:
-I booted up with the install/restore DVDs and have run the hardware checker several times. It says everything is fine.
-Also through the Utilities on the restore disk, i checked/repaired the disks and the "permissions" which showed up in the Disk Utility as the "Mac hard drive" or something like that, about 5 or 10 GB, and the main part of the drive, the "55.9 GB Fujitsu MHV2060BHPL". That all seemed to check out fine as far as the computer could tell me.
-I tried installing Tiger from the restore DVDs, the first time with the "archive and install" option. It seems like everything is working with the installation, and it gets through the second DVD, but when its done, it states that there are "software errors" and to try to install it again. (And no it won't boot up at all on its own...) I tried it again with another of the install options, I think it was "Erase and Install" - same thing. I also tried the "first time install option" too - same thing.
Next, since I got all my info off the computer already, I tried reformatting. First I used the function that writes zeroes over everything, for both the "Mac HD" and the "55.9 GB Fujitsu" drive too. Then I tried all three different install options again, starting with the "initial install" one. I also went into Disk Utility and used the format (and/or partition?) function and the drive has been redone with the mac os "extended journal" format, always with the same result as before. The whole thing (including the DVD test that it runs) seems to go fine with the install, but at the end it always says there are software errors and to try the install again... Is this possibly a hard drive problem (even though it "tests" fine)?
What if I ordered one of these:
Would that work in my macbook? Could I just replace the drive and go for another "first install"? Or is it likely something else?
View 9 Replies
View Related
Nov 12, 2009
if i delete files off my internal hard drive (Macintosh HD), will it still be on my external hard drive or will it just add to it?
View 1 Replies
View Related
Dec 17, 2010
I try to securely erase big hard drive and Disk Utility in Tiger says Secure Erase. Pass 1 of 7. Estimated time 123 hours
Is this progress bar only for erase 1/7 or for all 7 passes (1-7/7)?
View 1 Replies
View Related
Oct 14, 2009
with cloning/copying the content one an external hard drive onto a new external hard drive. Basically, I have a 500GB FW400 drive which I use to store my media files. It's full, so I purchased a 1TB FW800 drive to replace it. Obviously, I thought I could simply copy and paste the media files from the old drive to the new one.I cannot copy the media files to my internal drive first as my internal drive is only 250GB and nearly full itself.I have used Disk Utility to attempt to close the old drive to the new drive, but keep getting "insufficient space" errors.
View 9 Replies
View Related
Mar 31, 2012
Recently I bought 2 identical WD Scorpio Blue 1TB hard drives for my macbook pro 13 inch 2010. My aim is to replace the internal hard drive with one of the two I just purchased and use it as my system drive with Lion, Windows and Data partitions. And for the other hard drive I want to use it as a full disk back up for the internal drive (now 1TB hard drive). After I was done with setting up both windows and mac and data transfer, when I booedt into the recovery partition from the internal drive to clone the drive to the external drive, the disk utility gave me this error (Could not validate source - error 254). I also tried using Carbon Copy Cloner but it only could clone partitions, not the entire drive. Yesterday I downloaded a copy of Clonezilla. It worked fine until it had to clone an exFAT partition (my data partition). The exFAT partition appeared as 'RAW' partition in clonezilla. As a result, the whole partition appeared to be full and clonezilla had to copy every single blocks of data in that partition and the estimated time remaining was about 30 hours. So clonezilla is out too. Just want to ask if there is any program/application (bootable or not) which allows can do a full disk clone to an external hard drive.
View 1 Replies
View Related
Mar 1, 2012
I've had a lot of problems with my iMac G5 power supply and since I have newer computers I've decided to get rid of this computer.Â
I want to save the hard drive and put it in a case, then use it as an external drive on my other Macs.Â
What sort of case do I need to shop for? Should I look for SATA or what exactly is the proper nomenclature.Â
Is USB 2 the preferred choice, or Firewire, or what? Is there a USB 3? I use a mid-2010 27 inch iMac with the intel processor, and I needed to buy an adapter to use my older Firewire external drive. Is Firewire a dodo?Â
View 3 Replies
View Related
Apr 12, 2012
I need to back up hard drive to an external hard drive. How can I do this automactically?Â
Powermac g5
10.4.11
tiger
Info:
Mac OS X (10.4.11)
View 1 Replies
View Related
Aug 9, 2006
i have a power mac g-5 quad with an external dvd drive and a external hard drive and 2gb of ram. on my ext. hard drive i downloaded mac the ripper and that is where i put all my dvds, now today on my pmac i was using mac the ripper, popcorn, itunes, safari all at once and it froze up on me?why? could the ram be an issue? how may programs can i use at once with my pmac?
View 3 Replies
View Related
Jul 12, 2010
Looking for opinions or comparisons on performance between an internal mac hard drive vs an external firewire 800 hard drive or better. Is the performance on an internal MP drive or iMac internal drive much faster than connecting to a firewire 800 drive? I'm sure it depends on the drive, I'm wondering about apple factory installed internal drive vs say a WD external firewire 800
View 12 Replies
View Related
Aug 19, 2007
In other words... I have moved my music library to the external hard drive, as per an earlier thread I read here on the forums. It worked like quite well. Now that it is working perfectly, I am having a hard time leaving well enough alone. It is never a good idea for me to think too much...Can itunes be installed and run on/from an external hard drive? If so, how?
View 15 Replies
View Related
Dec 31, 2009
my mac has a pioneer dvd drive in it and it wont read my dvd+r dl and I am wanting to burn a mac os 10.5.dmg to it and install 10.5 but the dang thing is ejecting it. So what should I do to get it to work get the external dvd and run it from it or get a external hard drive and try it that way.
View 6 Replies
View Related
Jan 2, 2011
This is what im trying to do. I have a macbook with 120gb hard drive. thats not enough space from my music collection. So i was wondering how to make itunes run off a external hard drive. I looked around and found was for a PC.
View 2 Replies
View Related
Jan 29, 2008
I have an elderly Q950 with an external hard drive with everything backed up onto it. The external drive is a Micronet ADV1000E, with a sticker on the back saying it's Macintosh or PC compatible. I also have an iBook laptop, & PC Dell Inspiron 1300 laptop. As I have the 2 laptops, the Quadra hadn't been switched on for maybe one year. On the weekend I tried to get it to boot up (with & without the external drive switched on), but all it does is display a grey screen with an image of a 3.5" disk with a '?' in the middle. If I start up from a Norton 3.5" disk it still can't find the external or internal drive. If I try booting up with my finger in the shift key it doesn't want to know.
1. Any idea why the Quadra isn't seeing either the external or internal drive & what can I try to do?
2. Is there any way I can connect my external drive to either my iBook or Dell? At the moment I have no cables to connect the old & new - are cables available & if so any idea where from? I've looked high & low but so far no joy.
3. Is it possible to remove the hard drive from the Quadra or the external drive & put in an external drive enclosure, then connect that to either laptop? I see there are drive enclosures available which are Mac & pc compatible. This by the way would be a major undertaking for me. I'm by no means a computer dunce but would be wary of trying it.
View 7 Replies
View Related
Jan 16, 2008
when I went into the "get info" window for the G-Drive and switched the ownership/permissions dropdown from "read/write" to "no access". When I tried to switch it back to read/write, it would say read/write in the dropdown, but then I'd try to access the g-drive and I'd only get to the first set of folders--when I'd click on a folder, there would appear to be nothing in it. (Not sure if this is really related to my current problem.)
I then tried ejecting and remounting the drive, but it didn't show up on my desktop. Stupidly, I assumed my computer didn't recognize it at all and unplugged the firewire without ejecting thru disk utility. When I did this I got the device removal error.
I then plugged the firewire back in and tried repairing the disk in disk utility, but it said it didn't need repair. When I click on the G-Drive in disk utility the info at the bottom says:
Mount Point :/Volumes/G-DRIVECapacity :465.6 GB (499,973,603,328 Bytes)
Format :Mac OS ExtendedAvailable :
Owners Enabled :NoUsed :
Number of Folders :0Number of Files :0
0 Files! I'm worried about losing all my stuff! I then tried DiskWarrior (v4.0). When I first opened it I think the info at the bottom said "This disk is a Mac OS Extended disk. This disk does NOT appear on the desktop." I'm not quite sure about that "not" b/c after rebuilding the directory of the G-DRIVE I know it now says "This disk does appear on the desktop." Anyway, it's definitely not appearing on my desktop. After building the directory it said "All file and folder data was easily located. Comparison of the original and replacement directories indicate that there will be changes to the number, the contents and/or the attributes of the files and folders." And later: "19 files (and 2 folders) had a directory entry w/ an incorrect text encoding value that was repaired." And:
Disk Info:
Files: 51,646
Folders: 18, 493
Free Space: 65.42GB
(etc)
I then clicked "Replace" whereupon it said it was successfully replace. But still it did not appear on the desktop even after ejecting, remounting, rebooting computer, etc.
If anyone has any advice I'd really appreciate it. I'm pretty desperate here! Thanks!
(FYI I already tried going into the Finder permissions and unclicking and reclicking the box for showing disks on the desktop. Also, I plan on getting DataRescueII in case that's necessary, but i hope it isn't)
View 7 Replies
View Related
Sep 4, 2009
So, I've been searching the forums, as I just had a 1TB (well actually a dual 500GB) external drive stop mounting and start clicking on me. I'm trying to find a way to recover files, and I know I've seen a lot of posts on DriveSavers, which. I was searching around, and I was wondering if anyone has ever heard of a company called "OneWorld Data Recovery." It was something I stumbled across, but I can't find any reviews, or nail down anybody who's used it.
Clearly, this seems fairly suspect, but I figured I'd check and see if anybody had ever heard of it or used it. Thanks!
View 2 Replies
View Related
Mar 8, 2012
My internal 1TB hard drive on my iMac is dead and I don't have the money to replace it at the moment. I have everything backed up on an external 1TB drive using Time Machine. As a workaround for the time being,Is there any way I can install the system on the external drive and use that as the boot drive without erasing the Time Machine Backups? It seems to me I would have to have two partitions for the external drive, one for the system, and one for Time Machine. But is there any way to add a partition without erasing the existing one with Time Machine only on it? Â
View 8 Replies
View Related
Jul 5, 2012
I was using Mail I have set up my email again, so I don't want to lose anything currently in my inbox, but want to retrieve old messages and addresses. Running 10.6.8 OS.
Info:
iMac (27-inch Late 2009), Mac OS X (10.6.8)
View 3 Replies
View Related
Jul 2, 2012
I would like to use FileVault to encrypt both my hard drive and time machine back up external drive. Does encryption noticeable slow down the computer.
Info:
MacBook Air (13-INCH, MID 2011), Mac OS X (10.7.4)
View 1 Replies
View Related
Sep 5, 2014
Basically I have a 750GB hard drive in my Macbook Pro and over 300GB is taken up with 'BackUp' data. This is more than the total of everything I have on the drive other than that. Time Machine has always been setup on an external drive and when searching all files on the Macbook there is nothing for backup files so don't know where it is coming from.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
View 3 Replies
View Related
Apr 8, 2010
I want to put my old 15" PowerBook hard drive into an external case. I pulled the hard drive out of the PowerBook. And I purchased a NexStar CS 2.5" SATA to USB 2.0 external case. But the connections don't match. What do I need to do? Do I need to buy some sort of adaptor? Hard drive is a Hitachi 120GB 5400RPM (model # HTS541612J9AT00) 2.5" Sorry, these photos are blurry as hell. Picture of hard drive pins:
Pins are in the following configuration (1's represent pins):...............
View 8 Replies
View Related
