OS X Server :: Intel Xserve - Serial Console

Nov 12, 2007

Since I'm newly registered on this Forum I can not deal with on my own. We have about 20 intel- based Xserve (headless). Everything works fine except of serial console - there is no way to connect to it. There are only few random characters displayed on system start and thats all. I've tried all connection settings that are mentioned in Apple documentation (57600 8N1, 9600 8N1 etc.. ) with no success. I'm using ZTerm and PL2303 based USB RS232 adapter- no problem with serial console on sun, cisco, brocade and many more . Connection with older xserve's is also possible. I have to put all machines into production, but I can not do this without reinstalling Mac OS X - Raid 1 on OS slice is required. I can not start OS installation with no graphic card or serial console

View 3 Replies


ADVERTISEMENT

OS X Server :: Xserve Intel Setup - Unable To Configure Remotely

Dec 9, 2006

My new Xserve started up and I was able to configure it remotely via Server Setup Utility then after I input all of the settings it hung on finishing the setup for about an hour. I then restarted the Server and now I cannot see it.

View 2 Replies View Related

OS X Server :: Finding Information About Apple XServe For Web-server?

Jul 25, 2006

Is it just a server? and how much do they go in retail shops / stores??

I would like to find out as i have a mac mini, g5 quad and a macbook.. just a fan of apple mac lol. I do alot of webdesigning for many clients, could the xserve be a way to i don't know host these clients or something if it is a webserver?

View 7 Replies View Related

OS X :: Finding Usb To Serial Console Cable To Administer A Linux Box

Sep 1, 2010

I have a MacBook Pro (MacBookPro5,3) and a Via Epia based Gentoo Linux Box (motherboard: MB Jetway J7F4K1G5S A 1500MHz Mini-ITX ) and I would like to be able to administer it using a serial console (if -for example- ssh etc fails) as I don't have a monitor and / or keyboard.

In order to do so, I ordered an USB to Serial DB9 (male) cable from eBay [URL] which uses the PL-2303 chipset. I used the 64bit driver from github to get the cable working on Snow Leopard.

In order to connect the cable to the COM1 port of my Linux box (which is also male), I used a 9 Pin Female Serial RS232 Gender Changer Adapter as seen here: [URL] and I have setup my Gentoo Linux box to enable the console by adding "s0:12345:respawn:/sbin/agetty -L 115200 ttyS0 vt102" to /etc/inittab and ttyS0 to /etc/ttysecurity.

After reboot (or issuing 'init q') the serial console should work, however I am unable to connect to it from my MacBook Pro.

View 2 Replies View Related

OS X Server V10.6 Snow Leopard :: Mac Pro Xserve 10.6.8 AD And SMB?

Feb 13, 2012

I have configured Mac OS XServe 10.6.8. This Server is joined with Windows 2008 AD Server. I have done coming below: 

1. Server Admin.app

2. File Sharing -> careated new share folder "test". This folder is located this path "/Volumes/Macintos HD/test"

3. Under Permisstion tab i have clicked + button, then i got new tab "Users & Groups". Their i can see all my windows AD users.

4. I have selacted my user name and two more users full access.

5. Then i have enabled AFP and SMB protocols.

6. Then i have saved the configrstion.

7. Then i went my mac book pro laptop i tryied connect to server afp://192.168.1.5/test

8. I can access the share Folder.

9. Then i have tried smb://192.168.1.5/test

10. User Name and Password not autendicating. 

Info:
Xserve, Mac OS X (10.6.8)

View 2 Replies View Related

Hardware :: New Mac Pro Server Configuration To Replace Xserve?

Nov 5, 2010

Apple on Friday added a new server option to its Mac Pro lineup Friday, with a $2,999 system that is designed to replace the Xserve hardware which will be discontinued in early 2011.

The Mac Pro Server comes with one 2.8GHz Quad-Core Intel Xeon "Nehalem" processor, 8GB of RAM, and two 1TB hard drives. It also has Mac OS X Server unlimited with a client license, and an ATI HD 5770 graphics card with 1GB of GDDR5 memory.

The new configuration starts at $2,999 and ships in 2 to 4 weeks. Apple's previously available quad-core and 8-core Mac Pro systems ship within 24 hours, while the 12-core model takes 3 to 5 days to ship.

The new Mac Pro Server can also be upgraded, with custom build-to-order options offering up to two 2.93GHz six-core Intel Xeon "Westmere" processors, for a total of 12 processing cores at an added cost of $3,475. Users looking for the best possible system can also add $3,400 to the price and get 32GB of RAM.

The new hardware became available Friday after Apple quietly announced on its website that it would no longer offer its Xserve rackmounted servers after Jan. 31, 2011. New Xserver orders will be accepted through that date, and the hardware will be backed by Apple's standard one-year warranty.

Apple also issued documentation aimed at helping customers transition from Xserve to Apple's remaining server options, the Mac mini Server and Mac Pro Server. Apple's guide notes that the 12-core Mac Pro with Snow Leopard Server meets or exceeds the performance of the baseline Xserve hardware.

However, while Mac mini with Snow Leopard Server is much less powerful than Xserve, Apple's smallest desktop footprint has been the company's most popular server system since its introduction in the fall of 2009.[ View this article at AppleInsider.com ]

View 39 Replies View Related

Mac OS X Lion Server :: Which System Software For A Xserve G4

May 21, 2012

which system software for a Xserve G4?

Info:
Xserve

View 2 Replies View Related

OS X Server V10.5 :: Reset Xserve Administrator Password?

May 24, 2012

My Xserver 10.5.7 has spontaneously lost its Administrator password so it will not let me in to give it a new one. I don't have the Server Installation disk any longer, is there anything I can do to get back on the Xserver computer?

Info:Xserve, Mac OSX (10.5.7)

View 1 Replies View Related

OS X Server :: Breaking Xserve Software RAID Mirror?

Jul 28, 2006

I want upgrade our xserve from 2 x 250GB mirrored discs running Mac OS X 10.3.9 on xserve to running 1 x 250GB system disc (keeping other as spare) and 2 x 500GB mirrored data discs. (Then upgrade to Tiger).

Can I break the software mirror with:
diskutil destroyRAID /dev/disk{x}
or does this destroy the data too? Would I be left with two working, bootable discs or just two RAID slices? If the latter, how can I convert them into 'normal' bootable discs?Would it be better to upgrade to Tiger first? Or not make much difference?

View 1 Replies View Related

OS X Server V10.6 Snow Leopard :: Xserve Sharing Over Two Networks?

Apr 13, 2012

We have an Xserve (intel) with two ethernet ports running on OS X 10.6.8 server. It is connected to our network and sharing files with local users and authentication from our PDC (over an AD network). I need to setup a private network so that we can keep a few PCs off of our primary network (primarily to keep them from getting updates pushed or malware). Using the two ethernet ports, this should be do-able. It's practically automatic on a couple Windows boxes we have setup. However, when I plug a small router into the second ethernet port, I instantly lose the PDC communication on the other. I'm not sure if there are other issues at this point or not because there hasn't been a time when I can bring the system down (yet). 

View 4 Replies View Related

OS X Server :: How To Get The Enable Access Control Lists On This Volume Option On Xserve

Sep 25, 2007

How can I get the "enable access control lists on this volume" option on my Xserve to not be greyed out?

View 1 Replies View Related

Mac OS X Lion Server :: Can't Log In At Console With Any ID

May 10, 2012

So I picked up a client two months ago with a mac server (10.6.8). It had been sitting there un-used for 9 months.I created the network and configured services and users, in particular VPN. I got it all set up at the beginning of April. Mid-April I tested VPN again just to make sure it was working (it was).Hadn't heard from them until today when they could not log into the CONSOLE. Not the app or whatnot, but the console.It shakes like a wrong password with the administrator user and does nothing with other users.(all UID/PWD were correct)I was not able to VPN either but after a while I was able to once and saw the symptoms myself via VNC.(I lost the VPN session and was no longer able to VPN back in???) 

I am able to SSH into the server with a user ID and SU to administrator (not able to ssh as administrator directly???).I checked the update history and it has not had any updates since my work in April, nor is the command line update tool reporting any new updates available.It has been running 10.6.8 since last year (again, just sitting there).I checked the servermgrd is loaded.I read another dissucsion that says the resolution to the problem is upgrade the OS to 10.7.3 or newer? And isn't that a paid upgrade?(seems fishy at best if that is the case).I don't see an OS update when I check system updates.

Info:
Mac server 10.6.8, Mac OS X (10.6.8), can't log in

View 1 Replies View Related

OS X Server :: OS X Server 10.3 Serial Retrievable?

Jan 13, 2008

Can somebody tell me how to pull a CD KEY from a OS X Server 10.3 already installed ?

View 3 Replies View Related

OS X Server V10.6 Snow Leopard :: Can't Use 3TB Drive In Xserve Drive Caddy?

Jun 14, 2012

I am using a 2006 Intel Xserve (10.6.8) at home for storing lots of multimedia. My 2 TB user drive, which is inside of one of the Xserve's drive caddies is nearly full. I purchased a $157 3 TB Seagate Barracuda (Model No. ST3000DM001) from Amazon and put it inside the caddy. It is not being recognized at all. Looking around for solutions I am getting a hint that trying to restrict the data rate to 1.5 GB/s might help, which is documented for some of Seagate's older SATA drives, where one puts a 2-mm jumper clip on a header next to the SATA connector. This 3 TB model has the same header, but the manual only speaks of data rate autonegotiation. I'll be able to try out the drive with the jumper clip in place tonight and will report back. Curiously, in my Thermaltake USB-2 interface (toaster style), Disk Utility shows the drive as "801.57 GB Generic External Media," which is being discussed in a Leopard Server discussion thread. Last I saw, there was no good explanation for this symptom. 

Info:
Xserve, Mac OS X (10.6.8), Apple has made quite a bit of money off me over the years.

View 2 Replies View Related

Mac Mini :: Finding OS X Server Serial?

Nov 30, 2010

I can't find the Server Serial number in the Mac Mini package. Can anyone tell me where it *should* be?

View 2 Replies View Related

OS X Server :: Serial Key For Mac OS X V10.5 Leopard Install?

Jul 14, 2008

any one can give me serial no Mac OS X v10.5 Leopard Install

View 1 Replies View Related

OS X V10.5 Leopard :: Find Server Serial Number?

Feb 11, 2012

I have a Mac Mini Server with OS X Server. I needed to reformat my disk and reinstall the Server OS. The disk was reformatted ok. Now when reinstalling from the original disks it asks: " enter mac os x server serial number". I do not have the server serial number (I did not know that I should have written it down from the about box before reformatting). I have kept all items that were shipped with the computer but I cannot find the serial number. It is not on the disk sleeves or any documentation that I can find.  How do I find (or get a new) os x server serial number?

Info:
Mac mini, Mac OS X (10.6.6)

View 2 Replies View Related

OS X V10.7 Lion :: Console Log Missing From Console.app?

Mar 17, 2012

In Mac OS 10.6, the Console.app had an option to show the "Console Log" which included what looks like the stdout/stderr message of running applications not explicitly sent to syslog. The option showed up as the second option in the system log queries/database queries list on the Log List.In 10.7, the only option is "All Messages" and there does not appear to be a way to view the "console log" as it was in 10.6. Is there a way to turn this on in 10.7? Does the Mac no longer provide a way to see the stdout/stderr messages for running applications (those run as .app and not from terminal)?see attached screen shots (left is 10.6/right is 10.7) with console messages option missing.

View 2 Replies View Related

Intel Mac :: Should Be Concerned About Console Message Regarding Flip4Mac?

Feb 21, 2012

I have a late 2007 intel imac with 10.6.8. I notcied for the last two days that I have gotten this message after checking Software Update [code] I have had problems with occasional freezing/crashes where I have to do a hard shutdown, especially after watching videos via safari (e.g. Youtube) and/or the imac coming out of sleep. This hasn't been too problematic laterly compared to the past (maybe once or twice a week now v. once or twice a day). I do not know if this freeze/crash issue has anything to do with this console message.

Info:
imac, Mac OS X (10.5.2)

View 1 Replies View Related

OS X :: Stopping Console Messages/Deleted Apps Creating Console Messages?

Jan 11, 2011

I was using a program which opened my console and then I noticed in my console had messages referring to a couple of programs I removed a long time ago by dragging them to the Trash. It seems to be reporting thousands of messages every minute for one of the programs with the message "User or app not found." recurring.

This must be using resources, is there any way to stop this?

View 7 Replies View Related

Intel Mac :: Console Icon Mysteriously Appeared On Desktop?

Mar 27, 2012

A console icon mysteriously appeared on my desktop. 

Info:
iMac, Mac OS X (10.7.3)

View 2 Replies View Related

Intel Mac :: How To Find Serial Number

Apr 7, 2012

I accidentally inserted an SD card into the DVD slot.Can someone tell me how to safely remove the SD card?Quest

Info:
iMac (21.5-inch Late 2009)

View 2 Replies View Related

Intel Mac :: How To Find The Serial Number

Apr 22, 2012

iMac slowed down, PowerPoint and word wouldn't work, I tried to switch users then shut it down and now it is frozen with a white screen.

Info:
iMac, iOS 5.0.1, I think that's the OS.

View 2 Replies View Related

Intel Mac :: Programs Keep Asking For Serial Numbers?

May 9, 2012

I recently purchased a new imac to replace my older imac. I transferred all the old programs and such to the new imac, Now whenever I open a program it asks me to reinput the serial key to get the program running. it constantly does this everytime I open a program even though I have already done it?

View 5 Replies View Related

Intel Mac :: Find The Serial Number?

May 16, 2012

i got a new IMac yesterday, so what i want to do is i want to transfer my pics and music from my mac to my New IMac 

Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.4)

View 2 Replies View Related

Intel Mac :: (Mid 2007) And Later: Find The Serial Number?

May 2, 2012

How do you open PDF files with IMAC

Info:
iMac, iOS 5.1

View 1 Replies View Related

Intel Mac :: Where To Find Serial Numbers Of Defective Seagate 1T HD

May 9, 2012

Where can I find the serial numbers of the defective Seagate 1T hard drives that were in iMacs? I tried Seagate site. Not the iMac serial #, I know about the recall program. We are looking at a refurbished (not Apple) iMac & it has a Seagate 1T HD, naturally, we want to know if it is one of the bad ones.

View 4 Replies View Related

Intel Mac :: Serial Number Is Not Recognized By Apple Support?

May 27, 2012

why Apple Support page does not recognize my serial number even if I do an edit copy, edit paste?

Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.2)

View 3 Replies View Related

Intel Mac :: Where Is The Serial Number For Pre-installed Adobe Photoshop

May 31, 2012

I bought a refurb iMac directly from apple 2 years ago.  It already came with Adobe Photoshop as well as many others.  I didn't start using the photoshop until recently.  Yesterday, I logged on, and asked me for a serial number.  Where would I find this or how do I obtain this since it came with the iMac? 

Info:
iMac, Photoshop

View 5 Replies View Related

IMac :: Does The Logic Board Serial Number Match The Computer Serial Number

Jun 10, 2010

Does the logic board serial number match the computer serial number?

My reason for asking is that 4 months ago my sisters G5 17" logic board supposedly got replaced with a new or refurbished logic board but it seems by the workmanship of the board something fishy is going on.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved