This is the first time I try since my leopard install and once I hit Cmd-Shift-3 the screen freezes for 10 sec before having the screen shot on my desktop. On Tiger it was immediate, on my GF leopard MB it is als super fast.
For at least 24 hours now the internet has been incredibly slow on my Alubook. By super-slow I mean 10-15 minutes to load MacRumors. I was sure it was my connection, until I today tried it on my iPhone on the same WiFi network. Took a couple of seconds to load.
So I then thought Safari might be the problem, but I found it was equally slow in Opera and Firefox.
But today when I started my iMac he first didn't show my external hard drive so I thought maybe my hard drive is broken so I tried instead of FireWire an USB cable but that didn't work either. So I tried connecting it to another computer and it worked so the problem must be with my Mac somewhere.
Now my Mac goes extremely slow and when I do 'Shut down' it takes minutes to get him powered off completely.
Now after a few minutes my Mac sees my Hard Drive again but the Hard Drive usual Icon isn't showing and when I open it to browse through it, it goes extremely slow. It looks like he is initializing everything on my hard drive, so I can't copy or open anything that is on it because it goes so slow.
Got a 21.5 inch iMac desktop summer of 2010. I think it is the base model. All other info I can't get to on "about my mac" because my Mac is running like frozen molasses.
Anyway, last few days I thought the internet/Safari was running kind of slow. Pages would load, I'd get stuff done, but I just thought it was being glitchy. Then last night, my Mac would all out freeze. Rebooting took at least 5 minutes, and it doesn't matter what I try to use (chrome, firefox, safari), pages just won't load at all or freeze if I am able to make it to Google/Facebook/etc. Now the computer just sits at the blue screen part of the startup, and I had to just finally hard shutdown since I am not getting anywhere to even run a virus scan.
So I recently bought a Linksys WRT160N to replace an old router in my house. The network worked fine with the old router before it died... Browsing speed was great, download speed was great. Now that I have the WRT160N however, my network speeds have plummeted. And it's JUST my MBP... the rest of the computers in my house are Windows PCs and they are surfing away at supersonic speeds compared to what I'm getting on my MBP.
At first I thought it may be the wireless security (WPA) so changed it to WEP... no change. So then I just disabled it altogether... no change.
The Windows PCs are getting speed of about 2000 Kbps whereas I'm getting between 150 and 500 Kbps. I've already replaced the router once...
Is there anything I can do, or is this router just not going to play nice with Mac?
I first submitted this in another section of the forums thinking it had to do with my external HD, to only find out later it's a problem across my entire iMac, not just the external. It's nearly impossible to transfer files from anything other than my internal HD *to* my internal HD. What I mean is, when I try to move a file from my external HD, a shared computer via ethernet, or a mounted .dmg, it's transferring at something like 1mb per second or less. I got my copy of Leopard (10.5.6) 2 Fridays ago (I know, I'm late), and first did an upgrade. Everything was wonky, so I did an archive & install. Everything was still a little unstable feeling, so I opted for a clean install. I moved all my precious files over to my LaCie FW HD, confirmed them, and started onto the clean install and let that run while I slept. When I woke up, I had a brand new fresh installation of Leopard with the glorious BG, and I couldn't have been happier.
I started to move my files over manually (I wasn't using the migration assistance because I was organizing my files as I went considering time was not an issue), and first on the list was my music. I opened up iTunes, set my prefs, and started to import from my external HD. ..I just assumed it was taking a long time because I had around 7000 files of both music and video. But when I went to work, came home, took a nap, woke up, and it still wasn't done, it made me wonder. I assumed it was Spotlight doing it's thing on top of the iTunes import, and left it alone. But now when I'm trying to move over files only a few mbs, it slows to a halt. I tried to install Adium from a .dmg by first moving it into my Applications folder.. it's something like 50mb and it took about 10m. I had been expecting to drag the icon over and here that "ding" you hear when a file has successfully moved. The funny thing about this is that, when I look at the Activity Monitor, nothing's really doing much of anything. So then why is it taking 5hrs to move over a few gigs? Here's a screen shot:
I've noticed that in the past few months, Time Capsule has really slowed my wireless connection down a lot. And I mean a lot. Like down to 1.0 Mbs sometimes, slow enough that I can't even watch videos via Hulu because they can't stream fast enough.
Just for background, I'm running FIOS with the Actiontech wireless modem/router hooked to my TC via bridge mode. I have the wireless on the Actiontech off so as not to interfere with the TC, so there's no possible wifi interference. It was great when I first had this setup (20 Mbs up and down), back in Jan. It has been super up until a couple of months ago. At that time I did update to the latest firmware on the TC. But once I noticed the slow down, I reverted back and it's still slow. When I hook the computer directly to the modem, I get the 20 up/down as before. So clearly there is something wrong with the TC. I've already changed channels, but don't know where to go from here.
I just got a brand new macbook pro 13". I'ts booting in about 3 minutes without power. and then takes about 3 minutes after I log in just to get all it's s***t sorted out. I ran that 32/64 bit kernel application and put it back on 32 bit after it booted slow in 64 bit. Otherwise I dunno. Is this this supposed to be so slow?
I have a 2010 13" MacBook Pro. I bought a FW800 enclosure for my 500GB Seagate 5400rpm HD. In OSX using Path Finder to test transfer speeds I get around 40MB/s. Pretty good. Not as fast as it should be given the drive and FW800's possible speeds, but acceptable. When I switch over to my boot camp partition with Vista Ultimate installed I get 4MB/s. I can't figure out why I'm getting such slower speeds with Vista. I did the tests using the exact same files. So what am I missing? How can I get the transfer speeds I should be getting in Vista?
I recently bought a Power Mac G5 with 3 20" cinema displays, each with their own video card. I've since stopped using one and it sped up some. But even with the most simple tasks, it is hella slow and freezes sometimes. If I just have Firefox and iTunes open, it runs slow and the fans kick in overdrive. The main video card is an ATI Radeon x800 with 256 RAM and the other is a 9200 with 128 RAM. how to free up my RAM and speed it up?
So earlier after installing a windows 7 ultimate 64 bit RTM copy into bootcamp, things started acting up;
After installing some updates for 7, rebooting, it took about a minute to get the HD icons up to even choose one, and after that it was fine, except then the windows partition eventually just had a blinking cursor in the top right and stayed there.
I went into OSx, removed the 7 partition completely! my HD is one partition for Osx, but when I boot now, it takes yearsssss to just boot to osx, but if I hold option, then I instantly get a Macintosh HD (that's it) and it will go straight away.
What do I need to do? Reinstall SL? Please god no.
Partitions seem to be all messed up, maybe I will re create a windows install, and remove it again. (Xp this time)
Edit, This happened on 2 different MBP's one a 2.8 duo after I put on 7, they both take forever to boot to OSx. (With no BC partition even on)
I just want to let you know that I am really thankful for your help.
This is a 3-year old iMac version 10.4.11 I upgraded Safari as recommended a few days ago, and since then, Safari has not worked at all. At the same time, I was warned that my startup disk was full. Following the advice from some other mac help sites, I cleared the copies of my iTunes library to free space. I now have 6.72 Gigs of free space on my hard drive, but my computer is still running super slow. Just about every other thing I click on in Firefox gives me the rainbow wheel. I ran Techtools and everything passed but the Directory Scan and Volume Structure.
As soon as a friend can loan me a hard drive, I was planning on backing up everything and re-installing. Is this the best thing to do, or is there something else to try first?
I'm happily using my new 24" iMac, but I've run across a little problem this evening. I was trying to send a 225mb file as a mail attachment through my Gmail account using Mail. When I go to send the file, Mail crashes and disappears. This happened a couple times, so I logged directly into Gmail and sent the file through the web browser. Now the system is hung up 'sending' in the Gmail browser, and Finder has become very sluggish (slow response to clicks, errors printing, etc). Can the iMac and/or Mail handle sending files of this size?
I finally realized that I never use the four finger swipe to switch apps, thus I changed it to switch between spaces. Now I need short cuts of some sort to easily send windows into another space. I used to use the left bottom corner to open spaces and than move the windows around but that is inconvenient and slow. Is there any short cut that I press that moves any given window to another space. Or how can I create one. I have BetterTouchTool but I didn't find any command to make this happen. I am thinking of something like option+2 to send a window into the second space. In XP I had something similar to spaces and with ctrl+3 I switched to the 3rd space and with alt/opt+3 the active window moved to the 3 space.
I am familiar with CMD M combination to minimize screens. This is not doing the trick. I experience that I have to use this command several times as some programs just want minimize based on one command. It requires that one makes the programs active by clicking the cursor and than use cmd M again.
Is there yet another command that results in a an immediate desktop view.
I try the simple; Command, shift, 3 or 4 for sections. I was on the internet and I was looking for flights from my location to Boston, and I tried screens hotting and it redirected me to some page. To be more exact, commend shift 3 sends me to Facebook (3rd page on my bookmarks) and command shift 4 sends me to twitter (or the 4th one) ...
I don't know how to take a screenshot, or I would. I just tried to register my AppleCare (which I bought from the Apple Store the same day I bought my MacBook) and when I click "submit" I get a message telling me the product I'm trying to use is unavailable in my location (which I know for a fact isn't the case - I live in NC, not on Mars). Has anyone else ever seen this happen? I printed the screen to a PDF so when I go to the Apple Store tomorrow they don't think I'm nuts. I know there's no problem with what I bought, and I know I'll get it taken care of in the morning, but it's a bit annoying and I was curious to see if others had had this happen. Also - hope I posted this in the right thread, or at least something close to correct.