My 2008 iMac bit the dust but I did consistently back up using Time Machine to an external drive. I plan on replacing it but need to get some files off the backup soon. Is it possible to connect my external backup drive to a friends iMac and copy just the files I need?
Info:
iMac, Mac OS X (10.6.8)
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation homeÂ
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.Â
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).Â
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
Time will start a new complete backup every week or two. No long term back up.This is the message I get; "Time machine completed a verification of your backup on "GoFlexHome". To improve reliability, Time Machine must create a new backup for you"
Info:
MacBook Pro, Mac OS X (10.7.2)
I have port forwarded port 46 (TCP and UDP) to port 548 a Mac mini server running Mac OS X 10.6.8, and I have Time Machine backup disk on it set as a share point with Time Machine support enabled. On my Mac Pro running OS X 10.8.5, I am able to connect via AFP to my server with the address "afp://my-ip-address:46" and can read and write on the backup disk share point. I tested that, and it works. When I am on the same LAN as the server, I can use that disk for Time Machine and have been doing so for years. However, I cannot do a Time Machine backup to that share point over the WAN. When I open Time Machine preferences, I can select the share point as my backup disk, but once I start the backup, it says "Backup disk not available" and fails to start.
In case you're wondering, I forward port 46 to port 548 instead of port 548 to port 548 to minimize hacking attempts. Last time I used a default port, a computer in Taiwan started spamming SSH authentication failures.
Time Machine says it is indexing the backup and it has been going on for hours. How long will this take with a 2T HD?
Info:
MacBook, Mac OS X (10.5.6)
I'm one of the unlucky owners of Macbook Retina 15" Mid 2012. I was very satisfied with this computer, everything was great, untill I installed OS X Mavericks. My computer started to have GPU Panics all the time under some "heavier" usage like watching long videos on YouTube. I googled this problem and then I saw that I wasn't the only one, many people had problems after upgrading to Mavericks. I also read that downgrading to Mountain Lion solves the problem, but after the Internet Recovery update, when you are restoring your mac, it restores as Mavericks. I read Apple instruction how to revert os x, but it requires Time Machine backup from Mountain Lion, I already downloaded ML Installer from AppStore but I don't know how to install it.Â
View 2 Replies View RelatedI can't copy a Time Machine backup file (Backups.backupb) from one external hard drive to another. Both hard drives are Seagate 1TB Backup Plus. The Backups.backupb file is about 275GB. When I try to drag and drop the Backups.backupb file from one drive to the other (which I've tried three times) it to begins copy but after about 3GBs are copied I get a message that says "The operation can’t be completed because an unexpected error occurred (error code -50)."Â
I formatted (erased) the new hard drive with Disk Utility as Mac OS Extended (Journaled). Apple Support says I should format the new drive in Mac OS Extended (Journaled) "with a GUID partition," but I don't see the GUID partition as an option when I format the drive. Is this necessary, and if so, how do it do it? I'm using OS 10.8.6 on a 2012 MacBook Pro retna.Â
I also tried copying the backup files to another drive (a Maxtor HD) and got the same error message.
My MBA running ML has Pages '09. If I set up a refurb running ML will Pages '09 be on the second Mac if I set it up from Time Machine? Â
Info:
MacBook Air, OS X Mountain Lion (10.8.5)
For the past two weeks I've been having some major issues backing up my computer with Time Machine. It's become quite a process.Â
iMac 27", Mountain LionÂ
I am backing up to a brand new - well bought in February, '14 - 1TB external hard drive and there is NOTHING else in there except the TM backups.Â
For the past two weeks it's been failing the automatic backups. There is PLENTY of room on the drive.Â
The exact error message reads:"Time Machine ErrorUnable to complete backup. An error occurred while creating the backup folderLatest successful backup: [time and day entered here]"Â
To remedy this at first it was as easy as un-mounting the drive and then plugging it back in and it was fine.
Now I've got the disk utility open and constantly repairing the drive and this is only a temporary solution.Â
Below is a small sample of the report from the utility each one is dated.
How to fix this without having to purchase a new drive? In February the old external drive I had started to freak TM out and it just erased ALL my backups which I desperately needed due to the same error / failure. That drive had plenty of space as well but I lost all my stuff anyway.Â
I know the TM isn't for archiving and another question I have is, How can I transfer or even rename the backup folder that TM makes and move it to a 'free drive' to prevent overwriting? Right now I just keep buying new drives which is ridiculous.
I excluded for one TM backup a sparse bundle disk image that I have been backing up regularly. I then immediately removed the sparse bundle disk image from the TM exclusions list, and now TM wants to back up the entire sparse bundle disk image, which contains an iPhoto Library (80GB). It seems that TM does not "see" the previous disk image backups.
Info:
iMac, OS X Mountain Lion (10.8.5), 21.5-inch, Late 2009
My time machine backup isnt working for the last few months. The backup is located on a QNAP TS-670. Â
I can look for the TM and the iMac see the TM, but if I start the backup, a popup comes up. "The image of the backup-volume "/Volume/TMBackup/Danielas iMac.sparsebundle" cant be accessed. (Error -1)
Maybe it is not the exact error message in english, but I hope you know what I mean. Im working on a german system.Â
I can access the TM-Share through the finder (share: afp://[...]).Â
Here is the log I've got from the terminal:Â Danielas-iMac:~ danielawendling$ tail -f /var/log/system.log |grep backupJun 6 14:43:36 Danielas-iMac.local com.apple.backupd[323]: Failed to eject volume /Volumes/TMBackup (FSVolumeRefNum: -105; status: -47; dissenting pid: 0)
[Code] .....
Info:
iMac, OS X Mountain Lion (10.8.5)
I am backing up my data from my mac book pro for a second time. I plug in my external, and it says it doesn't have enough memory to back up my computer. I have 1 TB hard drive and used about 650 MB for the first back-up. Obviously I don't have enough to back up everything for a second time. I just want to back up the new stuff. When I go to exclude the current external from the new back up, it's grayed out. Do I have to delete the contents of the hard drive and re-back up the entire computer?
View 7 Replies View RelatedOk... So, I have an extremely slow Time Machine backup. Many people do. I've gone through the motions and tried to resolve the issue by doing the suggested restart in Safe Mode. I even followed some of the other tips that are on this string: slow time machine backupÂ
Nothing has worked. I don't use Norton Symantec but I didn't the Norton Remove script through the Console already. I don't run any anti-virus software. Â
This started when I was backing up to at Time Capsule. I backed up to the TC for years before this started. I then moved to backing up (started fresh) to a external HD connected via USB.Â
I have a 2010 Mac Mini with OS X 10.9 (Latest Version)Â
Have made many manual Time machine Back ups that calculated the differnce and adjusted the differnce in what was then saved. The very size of the external HD did not roll over. Yet the calculation states a entire new Back Up. Is this a permission changing issue? Or what?
View 3 Replies View RelatedAwhile back I installed a wonderfully speedy SSD in my mid-2009 MBP. I used Time Machine to "restore" my stuff. I thought it odd that after that, song files would come up as "locked"...after awhile I realized that EVERY song file in the iTunes Library was now "locked". The FOLDERS are NOT locked, but all the mp3 files within each folder ARE locked.Â
I know, of course, that "command-i" and uncheck the locked box works on each individual file, but how do I do this on the entire library? Is that even possible? The tedium of opening every single folder and unlocking every file individually would be insane. Is there any way to select the iTunes Music folder and have all the files in all subfolders "unlocked" at once?
Info:
MacBook Pro
After I backup my computer onto a Hard drive using time machine, I delete certain folders off my computer, then assuming my files are on the HDD, I go back to the HDD to see the files, but the files on the Time machine back up are gone! What is happening? and how do i prevent this from happening?
View 4 Replies View RelatedI have a 500GB HD in my mini. I have a 2TB drive with about 1TB of files on it. Can I use some of the free space for backup and still use the rest for files?
Info:
Mac mini, Mac OS X (10.7.3)
I couldn't enter Time Machine backups, that is, "Enter Time Machine" from the Time Machine menu item did nothing. I tried Postini's recommendations about resetting, repairing the sparsebundle image, and tried accessing with the bundle mounted. Nothing worked.Â
What did work was Time Machine Preferences>Select Disk… and clicking Do Not Back Up. Then a new item appears in the Time Machine menu items: "Browse Other Backup Disks…" Selected that and then selected my backup. And then I was in.Â
My purpose was to delete some large movies that were taking up too much space. I went back to the Finder and opened the folder where the movies had been (I had deleted them in the Finder) then went back to "Browse Other Backup Disks…" and there was the folder in Time Machine. And I deleted the files. I was later able to reselect my Backup disk and the options were still saved.However I haven't seen the space recovered yet. I may have to read more on compressing the disk image if it doesn't fix itself soon. Â
Info:
iMac, Mac OS X (10.7.3)
My login.keychain password is not recognized anymore, i am very sure about the actual pwd string and I tried to restart apps and machine already, I believe the file got corrupted somehow, hence various applications such as FTP clients cannot autoconnect to external resources
I am bound to recover from a Timemachine backup, but all discussions are just dealing with recovering items in the keychain file once it is restored, what about the keychain master password? is it contained in the login.keychain file so that restoring that file to the HD will allow me to regain access to the saved items?
Info:
macbook pro, Mac OS X (10.6.5)
Moved all my movies audio etc and stored on external HDD, but as I have lion and time machine it saved a local back up so that when time machine was synced it didn't miss anything.Seems sensible, so next step was to sync time machine, expecting that the local back up would disappear when it shifted to TM. It didn't...why in gods green earth is the local back up there even though TM connected the whole time and up to date? Â I've restarted, loaded all updates and verified disk. How do I get to the "it just works" part without having to Delete this double up (32GB "backups") via terminal etc....
Info:
Mac Pro, Mac OS X (10.7.3)
I would to upgrade my OSX form 10.6.8 to Mavericks and I have already downloaded installing files. I have already checked the compatibility of most important apps I'm using and there are not problems about these. I have some questions:upgrade or new installation? with the new os can I recover a file from Time Machine backup produced with Snow Leopard?Â
View 2 Replies View RelatedI was trying to remember how you do this exactly, since it said you could when I was restoring it. Anyways, I fully restored my Mini, and I wanted to get my iPhoto off of my Time Machine. However, it says that I don't have permission to drag it off of the Time Machine...maybe I'm doing it wrong (supposed to use a program to do this?)
View 4 Replies View RelatedI have lost files kept on an external hard disk but not backed up in Time machine, because of the vast number and size of them. Is there a way to recover them?=
Info:early 2006 mac mini, Mac OS X (10.6.8), 1.5GHz Intel, 1Gb 667MHz DDR2 SDRAM
I'm running Time Machine on a Western Digital network storage device from my iMac. It works fine. I can go back any amount of time and recover files as they were backed up then. But I also want to be able to depend on Time Machine backups to allow me to recover files if my iMac goes down. So just as a test, I tried to use the Browse Other Time Machine Disks feature from my MacBook Air. I can't make it work. It shows me a Choose Time Machine Disk to Browse window, but there are no disks in the choose pane.Â
People have been telling me that I have to "mount" the volume, but I see no way to do so. Clicking Go - Connect to Server - Browse, shows me that the backup disk is there; it's called <mydiscname>-backup. But when I try to connect to it I get an immediate connection failure.Â
 I'm beginning to suspect that there is no way to restore from another computer when the Time Machine backups are on a network storage device? If this is true, people need to know it and stop using network storage for Time Machine, as it won't be safe if their principal Mac goes down.Â
Info:
iMac, Mac OS X (10.5.2)
I just switched from hdd to ssd and i want to resume my Timechine backups, but it says that I have incorrect date and time set in my mac.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Have use Firefox for years. There is supposed to be list of folders that goes Hard drive/Library/Application Support/Firefox/Profiles/Bookmarks. My Time Machine goes Hard Drive/Library/Application Support/Mozilla/ after that everything is different.
Info:
Firefox, Mac OS X (10.7.2)
I lost my old Stickies, maybe in upgrading to Lion. I know the database is in my Library, but I cannot find a way to get into my Library in Time Machine.
Info:
iMac, Mac OS X (10.6.8)
I may have a corrupted an iweb file, as I am unable to publish my web site. However when I open time machine I can't trace where the file Domain.sites2 which I believe is the one I need, but I woud like a couple of days ago version?
Info:iMac, Mac OS X (10.7.2)
I used Time Machine to recover my Pictures folder. This created a folder called Pictures (original) but I cannot open it. There is a do not enter roadsign, red disk and white bar on it. How can I see the contents?
Info:
MacBook Pro, Mac OS X (10.7)
I have successfully transferred my account information from my '09 OSX10.7 MacBook to a 2014 OSX10,10,1 Power Book. Will Time Machine on the new Laptop immediately recognize the back-up data on the External Drive used with Time Machine on the old Laptop? If not, are there instructions on how to get Time Machine to access this data automatically (vs Manual file selection)?
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
