My MBA running ML has Pages '09. If I set up a refurb running ML will Pages '09 be on the second Mac if I set it up from Time Machine?
Info:
MacBook Air, OS X Mountain Lion (10.8.5)
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation home
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
Time will start a new complete backup every week or two. No long term back up.This is the message I get; "Time machine completed a verification of your backup on "GoFlexHome". To improve reliability, Time Machine must create a new backup for you"
Info:
MacBook Pro, Mac OS X (10.7.2)
I have port forwarded port 46 (TCP and UDP) to port 548 a Mac mini server running Mac OS X 10.6.8, and I have Time Machine backup disk on it set as a share point with Time Machine support enabled. On my Mac Pro running OS X 10.8.5, I am able to connect via AFP to my server with the address "afp://my-ip-address:46" and can read and write on the backup disk share point. I tested that, and it works. When I am on the same LAN as the server, I can use that disk for Time Machine and have been doing so for years. However, I cannot do a Time Machine backup to that share point over the WAN. When I open Time Machine preferences, I can select the share point as my backup disk, but once I start the backup, it says "Backup disk not available" and fails to start.
In case you're wondering, I forward port 46 to port 548 instead of port 548 to port 548 to minimize hacking attempts. Last time I used a default port, a computer in Taiwan started spamming SSH authentication failures.
Time Machine says it is indexing the backup and it has been going on for hours. How long will this take with a 2T HD?
Info:
MacBook, Mac OS X (10.5.6)
My 2008 iMac bit the dust but I did consistently back up using Time Machine to an external drive. I plan on replacing it but need to get some files off the backup soon. Is it possible to connect my external backup drive to a friends iMac and copy just the files I need?
Info:
iMac, Mac OS X (10.6.8)
I'm one of the unlucky owners of Macbook Retina 15" Mid 2012. I was very satisfied with this computer, everything was great, untill I installed OS X Mavericks. My computer started to have GPU Panics all the time under some "heavier" usage like watching long videos on YouTube. I googled this problem and then I saw that I wasn't the only one, many people had problems after upgrading to Mavericks. I also read that downgrading to Mountain Lion solves the problem, but after the Internet Recovery update, when you are restoring your mac, it restores as Mavericks. I read Apple instruction how to revert os x, but it requires Time Machine backup from Mountain Lion, I already downloaded ML Installer from AppStore but I don't know how to install it.
View 2 Replies View RelatedI can't copy a Time Machine backup file (Backups.backupb) from one external hard drive to another. Both hard drives are Seagate 1TB Backup Plus. The Backups.backupb file is about 275GB. When I try to drag and drop the Backups.backupb file from one drive to the other (which I've tried three times) it to begins copy but after about 3GBs are copied I get a message that says "The operation can’t be completed because an unexpected error occurred (error code -50)."
I formatted (erased) the new hard drive with Disk Utility as Mac OS Extended (Journaled). Apple Support says I should format the new drive in Mac OS Extended (Journaled) "with a GUID partition," but I don't see the GUID partition as an option when I format the drive. Is this necessary, and if so, how do it do it? I'm using OS 10.8.6 on a 2012 MacBook Pro retna.
I also tried copying the backup files to another drive (a Maxtor HD) and got the same error message.
For the past two weeks I've been having some major issues backing up my computer with Time Machine. It's become quite a process.
iMac 27", Mountain Lion
I am backing up to a brand new - well bought in February, '14 - 1TB external hard drive and there is NOTHING else in there except the TM backups.
For the past two weeks it's been failing the automatic backups. There is PLENTY of room on the drive.
The exact error message reads:"Time Machine ErrorUnable to complete backup. An error occurred while creating the backup folderLatest successful backup: [time and day entered here]"
To remedy this at first it was as easy as un-mounting the drive and then plugging it back in and it was fine.
Now I've got the disk utility open and constantly repairing the drive and this is only a temporary solution.
Below is a small sample of the report from the utility each one is dated.
How to fix this without having to purchase a new drive? In February the old external drive I had started to freak TM out and it just erased ALL my backups which I desperately needed due to the same error / failure. That drive had plenty of space as well but I lost all my stuff anyway.
I know the TM isn't for archiving and another question I have is, How can I transfer or even rename the backup folder that TM makes and move it to a 'free drive' to prevent overwriting? Right now I just keep buying new drives which is ridiculous.
I excluded for one TM backup a sparse bundle disk image that I have been backing up regularly. I then immediately removed the sparse bundle disk image from the TM exclusions list, and now TM wants to back up the entire sparse bundle disk image, which contains an iPhoto Library (80GB). It seems that TM does not "see" the previous disk image backups.
Info:
iMac, OS X Mountain Lion (10.8.5), 21.5-inch, Late 2009
My time machine backup isnt working for the last few months. The backup is located on a QNAP TS-670.
I can look for the TM and the iMac see the TM, but if I start the backup, a popup comes up. "The image of the backup-volume "/Volume/TMBackup/Danielas iMac.sparsebundle" cant be accessed. (Error -1)
Maybe it is not the exact error message in english, but I hope you know what I mean. Im working on a german system.
I can access the TM-Share through the finder (share: afp://[...]).
Here is the log I've got from the terminal: Danielas-iMac:~ danielawendling$ tail -f /var/log/system.log |grep backupJun 6 14:43:36 Danielas-iMac.local com.apple.backupd[323]: Failed to eject volume /Volumes/TMBackup (FSVolumeRefNum: -105; status: -47; dissenting pid: 0)
[Code] .....
Info:
iMac, OS X Mountain Lion (10.8.5)
I am backing up my data from my mac book pro for a second time. I plug in my external, and it says it doesn't have enough memory to back up my computer. I have 1 TB hard drive and used about 650 MB for the first back-up. Obviously I don't have enough to back up everything for a second time. I just want to back up the new stuff. When I go to exclude the current external from the new back up, it's grayed out. Do I have to delete the contents of the hard drive and re-back up the entire computer?
View 7 Replies View RelatedOk... So, I have an extremely slow Time Machine backup. Many people do. I've gone through the motions and tried to resolve the issue by doing the suggested restart in Safe Mode. I even followed some of the other tips that are on this string: slow time machine backup
Nothing has worked. I don't use Norton Symantec but I didn't the Norton Remove script through the Console already. I don't run any anti-virus software.
This started when I was backing up to at Time Capsule. I backed up to the TC for years before this started. I then moved to backing up (started fresh) to a external HD connected via USB.
I have a 2010 Mac Mini with OS X 10.9 (Latest Version)
Have made many manual Time machine Back ups that calculated the differnce and adjusted the differnce in what was then saved. The very size of the external HD did not roll over. Yet the calculation states a entire new Back Up. Is this a permission changing issue? Or what?
View 3 Replies View Relatedif i am running my new lion OS on drive #1 and i have a Raid1 array on drive #3 and #4 with all my DATA - can i back this up using Time Machine? i would like to place my OS's on a single drive and have my DATA in a raid array but if this means that i lose the ability to retain a Time Machine backup of my data i will simply upgrade to Lion and keep the data on this drive so it can continue to get backed up in time.
View 7 Replies View RelatedNew to MAC and buying a OWC Mercury Elite-AL Pro
1.0TB Quad Interface eSATA/FW800/FW400/USB 2.0 & 1.1 Storage Solution
Should I use Time Machine or is the included software, Prosoft Engineering Data Backup 3 a better option?
How do i restore my hidden ical data from a Time Machine backup?
Info:
iMac, Mac OS X (10.7.3)
How long would it take to backup 900GB of data doing a full back-up using TimeMachine and my MacBook? My MacBook being a 2009 model with 2.13 GHz Intel Core 2 Duo and 4GB 800 MHz DDR2 SDRAM.
I have:
1 x MacBook 160GB drive
1 x Imoega minimax 500GB drive (firewire or USB 2 connection possible)
1 x Seagate 320GB drive (USB 2 only connection)
I have a 400 firewire port in my MacBook in addition to 2 USB sockets, as well as fireWire hub with power supply, should I wish to run 2 or more firewire devices at once, into the 400 firewire port.
My current backup drive is a Samsung USB2 1TB drive but for reasons that will hopefully become obvious below, I will need to purchase a new drive. I think a 1.5TB or 2TB would be fine and I guess a 400 firewire port is still better than USB2, even though it's only 400. However I'm not sure about the time issue.................
After a catastrophic HD crash I bought a small 250GB external hard-drive an started to use Time machine. Since my Mac was freshly formatted, I tend to keep it tidy and clean and keep good track of what comes in. I noticed my time machine backing up 15 GB of data which allegedly would have been added within two days. I could absolutely not trace this on my computer nor when I compared current folder contents with the most recent backup. Downloads, Apps., System are all excluded from my time-machine and couldn't represent such a dramatic data increase on my separate HD.
View 2 Replies View RelatedI'm doing an initial backup to a Time Capsule and I want to make sure all my data was copied successfully. Does Time Machine verify that the data was copied successfully or does it just send it and hope everything copied alright? I know this is the kind of question only the Apple developers would know for certain, but hey, sometimes folks on these forums are surprisingly knowledgeable so I figured I'd ask here.
View 5 Replies View RelatedI'm getting a new macbook. Currently I use time machine as a backup tool and was wondering if I should use it to transfer all my data to the new mac. One benefit of a new harddrive is the fresh install without all the junk that has built up over the years right? So wouldn't time machine just be transferring all the junk and stuff I want to the new mac? or is time machine smarter than this.
View 10 Replies View RelatedSo I just successfully migrated all of my data and settings from my old iMac to my new 27 inch iMac using the Time machine backup on my Western Digital 1 TB external hard drive. Aside from the Time machine backup folder I also dragged a few other things over to the external hard drive because there was so much extra space on it. The drive is not partitioned.
So I'd like to start using Time machine with this new 27 inch iMac but the empty space that's left on the external hard drive is barely large enough to cover what I now have on the internal hard drive on my new 27 inch iMac. If I were to remove the Time machine backup from my old iMac there would be plenty of space again unless starting Time Machine on this new 27 inch iMac will just copy right over that backup file? Everything on this new iMac, the data and settings and so forth, is exactly the same. So is the user account. However the previous Mac was running Leopard while this new iMac is running Snow Leopard.
So if it doesn't copy over the old backup it will just create a new backup file? And if it does create a new backup file is there any point to keeping the old backup file since I no longer have the old iMac and wouldn't be able to access it again? Obviously if I didn't have to keep it I could erase it which would create plenty of extra space for me to start using Time machine again but with this new iMac.
We are a PC to Mac convert and still trying to understand some basics. We have an iMac 21.5 and expecting delivery of a external 1.5 TD drive. More than we'll even need, but dirt cheap. We also run Windows 7 64 bit through VMware Fusion. The only reason for that is the Windows version of Quicken is a better product the the Mac version.
We will back up pics, Videos, etc., on the iMac under MacOs with Time Machine. Can Time Machine also backup the quicken data files from the Windows 7 VM machine? I hoping we do not need to maintain separate backup drives to manage the different type of file formats between Windows and Mac. I hoping this can be managed through one place...Time Machine.
I have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I recently purchased a Mercury Elite-AL Pro from OWC and it included Prosoft Engineering Data Backup. Are there advantages in using Time Machine vs. Prosoft Engineering Data Backup or vice versa? Also, what about something different like Carbon Copy Cloner? I'm looking to do this right the first time.
View 1 Replies View RelatedI've spent a good deal of time over three days trying to do something that I think is both doable and shouldn't be all that hard. I have a 750gb external HD attached to a Mini, and I'd like to use that drive to do TM backups for the Mini, as well as three MacBooks.
But I can't seem to get access to the backup drive from the laptops to either get going in the first place, or to remain available for TM. I get "volume can't be mounted" errors, "image can't be mounted errors", etc. I find that I can't ever eject the backup drive from the Mini (always told an application is using it...even if I've just booted up the Mini). And with one of the MacBooks, even a direct FW connection to the drive doesn't result in the drive showing up in Finder.
Isn't this a pretty straightforward thing to do? Is there a step by step somewhere that might help me figure out what I'm doing wrong, or what I need to fix? Should I reformat the drive again and start over (there are no important backups on it yet)? By the way, the drive is formatted Mac OS Extended (Journaled).
I have a linksys wrt610n wireless router that isn't set up yet. You can attach USB drives to the router to use as a nas. I can't find if time machine will use it or let me use a drive attached to the router for my backups.
View 3 Replies View RelatedI connected my windows removable disk to my colleague's mac to transfer some data. Accidentally her system started a time machine backup on my removable disk. Although we stopped it during middle of the process, now my disk is no longer recognizable in windows and all I can see under a mac system is her backup file.
The process took a very short time. I wonder if it has deleted everything. Is there any chance I can get the overwritten data back? They are very important to me.
Besides, is it a common problem of time machine backup? It is too dangerous for the removable disks.
Can I use time machine to back up my data without formatting the external hard drive .. If not please let me know if there is a way to back up to hard drive without using time machine.. Thank you
View 5 Replies View RelatedI just got a new 256GB SSD drive for my mac, I want to import my data from time machine backup, but its larger than 256GB since it used to be on my old optical drive. How can I import my latest backup keeping out some big files on the external drive?
Info:
MacBook Pro, iOS 8.1.1
