I have read several reviews that say there are some usb external displays that don't work with mavericks. I really wan't to have another monitor besides the one out of my thunder bolt cable. I understand that i need to update my drive and that might be why the reviews are the way they are they did not update there drive.
View 2 RepliesI'm trying to write an AppleScript to change the resolution of my external display from 1920x1080 to 800x600 and back to 1920x1080 (it has a few issues and this fixes them, but I'm tired of going into System Preferences to do this all the time). I can get the script to open up System Preferences and option-click the scaled button (so all of the different resolutions come up), but I can't get it to select anything inside of the box where all of the different resolutions are (I can't find what I'm supposed to refer to it as anywhere and if I find something it doesn't work). Here's the code I have right now:
tell application "System Preferences"
reveal anchor "displaysDisplayTab" of pane "com.apple.preference.displays"
end tell
tell application "System Events" to tell process "System Preferences" to tell window "LCDTV16"
[code]...
I have a 15" Mid 2012 MacBook Pro (non-Retna) running OS 10.9.3.
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.
Info:
OS X Mavericks (10.9.4)
I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
View 1 Replies View RelatedJust wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
I have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies View RelatedI am about to buy a new 24" iMac. I currently have a Dell 2408WFP 1920*1200 display which I would like to use as a second display for the iMac.
Which Mini Dislpayport to DVI adapter do I need? Single-Link or Dual-Link?
I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
I'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
While using Google Sketchup and several other prgrams concurrently my macbook air cpu heats up substantiall. I like keeping the air "open" to allow for maximum heat disipation but of course this keeps the air screen on while I only want to use my external monitor. Is the only way to turn of the air screen turning down the brightness and using the "Mirror Display" option or is there another setting which alows my to utilize only the external display while the screen is open on the air?
Info:
MacBook Air, Mac OS X (10.7.4)
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
i'm hoping someone can help me out on this little problemmy usual set up is a pair of speakers connected with jacks via an m-audio usb audio interface, with an external monitor connected via mini-dvi to dvi.now for some reason my audio interface has randomly broken (on a side note, could a power cut have somehow broken a usb peripheral connected to my macbook whilst it was asleep?) so i've hooked up my speakers to the line out to rca. Now for some reason, when i plug the mini dvi connector into my macbook i get an incredible amount of hum. not just a little, alot!
View 1 Replies View RelatedI have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
when displaying with the Finder (MacOS X 10.9.3) the "Downloads Folder" content in list mode, It didn't display the small triangle in front of the folder which are present. In order to display the content of such a folder, I must double-click on the folder instead of clicking on the triangle as previous. way to get back to the right Finder display.
View 4 Replies View Relatedour email display name has incorrect name however the email address is correct. how do we edit the display name.
View 2 Replies View RelatedI want to see what's happening on my Wi-fi network (and manage that if can) with Terminal, because I don't like other software.
View 1 Replies View RelatedUnder 10.6.8, it has been my habit (and pleasure) to open very wide terminal windows across as many as three displays in order to see the results of somewhat wide database queries without text wrapping, which affects readability and cuts the number of lines visible on the display window at once.
Under 10.9.3, when I adjust a window over towards another display so that the window would be on both displays, the window is "ghosted" until I let go of the drag bar, and if the move has not fully adjusted the window to land entirely on the display it is moving into, that half of the window promptly disappears.
Am I missing something about window positioning under Mavericks? Or, is there any way to regain the previous, multi-display-friendly window handling in Mavericks?
Suddenly my iMac's display is very dim - almost can't read the text. The display brightness keys <F2> and <F1> don't do anything any more. How can you adjust the screen brightness?
Info:
iMac (21.5-inch Late 2009), OS X Mavericks (10.9.4)
I am new to the Mac OS system and am facing a difficulty.I want to keep my macbook running through the night downloading the updates, however I want the display to be off. For this I have used apps like caffeine and no sleep and have also modified the system preferences. But still whenever I turn off my display, after some time the macbook goes to sleep and all my downloads and updates are paused.
Is there any workaround which allows me to turn off the display without letting the mac to go to sleep ??
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
Display preference pane does not open with message "Could not load Display preference pane"
Log says this:
System Preferences[2132]: ### com.apple.preference.displays instantiatePrefPaneObject exception:Cannot lock focus on image <NSImage 0x608000272500 Size={0, 0} Reps=(
)>, because it is size zero.
How can I restore the pane?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I have just installed Maverick. Mail does not display my Smart Mailboxes. The contents of the boxes are there as long as I can remember what I named the boxes. It seems that I have to search for the Smart Boxes by name and then transfer all the contents into a new Smart Mailbox of the same name. How to recover the Smart Mailbox before I go through another self defined process?
View 1 Replies View RelatedWhen I open some, maybe a tenth of my incoming emails, they open in window much wider than my display, like twice display width. Probably happens on mail sent from Windows machines. No other time, in no other application, does anything display beyond normal screen width.
I have to scroll WAY OUT right to for example get to the reply button.
In Firefox or Chrome. My normal email is gmail. This is not in Apple Mail. This happens in Firefox or Chrome receiving in gmail.
Mac Mini i5 2.5gHz 4G 10.8.5
Firefox v.30.0
Chrome v.35.0.1916.153
Display: Dell 17" E173FP: Resolution: 1280 x 1024 @ 75 Hz
when i am trying to login into my user account on my macbook pro. it just starts loading but after that it doesnt display anything and keeps on loading for hours.Also when i logged into guest user it asked me to restart for the safari use only and after using that option i am just able to use safari with the displaying problems.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a 21.5' iMac (Mid 2011) and a 27' iMac (late 2012) that I would love be able to use Target Display Mode. Unfortunately I have tried everything I could think of to get it to work. Here is a list of things that I have tried but have been unsuccessful at enable TDM:
1.) Completely restored Mac OS X 10.9.5 on the 21.5' iMac. Setting this machine up as new since it will be my external display.
2.) No firmware password enabled
3.) Reset PRAM on both machines
4.) Connected an Apple Keyboard w/ numeric keypad to the 21.5' iMac.
5.) Pressed CMD+F2 to enable TDM (no luck)
6.) Tried to enable 27' iMac as external display
Repeated same process with an 13in Macbook Air (Mid 2011) and got the same result. TDM will not work.
So I did some extra troubleshooting to try to target why TDM won't work.
I put my 21.5' iMac in target disk mode and connected it via thunderbolt with my 27' iMac but it doesn't see the 21.5' iMac while in target disk mode. I also tried the same process with my 13' MBA and I don't see the 21.5' iMac while in target disk mode.
Info:
iMac, OS X Mavericks (10.9.5)
The TRUE/FALSE value are not displayed when opened on MAC OS X 10.4.
Info:
Mac mini, Mac OS X (10.4)
I have a new Mac Pro (cylinder) running OSX Mavericks (10.9.4, up to date) which has an issue with power saving and disk I/O.
I have my display set to sleep after about 15 minutes of inactivity. I have turned off other power saver features. When this happens, any jobs I have running stop -- in this case, I was running a "dd" off a USB-mounted SD disk, which I wanted to run over night. Instead, it stopped and I had to restart it.
In a non SD-disk based Mac, this isn't a problem. The system just turns the display off and everything else runs.
Info:
Mac Pro, OS X Mavericks (10.9)
