OS X Mavericks :: Using AppleScript To Change Screen Resolution Of External Display
Jun 25, 2014
I'm trying to write an AppleScript to change the resolution of my external display from 1920x1080 to 800x600 and back to 1920x1080 (it has a few issues and this fixes them, but I'm tired of going into System Preferences to do this all the time). I can get the script to open up System Preferences and option-click the scaled button (so all of the different resolutions come up), but I can't get it to select anything inside of the box where all of the different resolutions are (I can't find what I'm supposed to refer to it as anywhere and if I find something it doesn't work). Here's the code I have right now:
tell application "System Preferences"
reveal anchor "displaysDisplayTab" of pane "com.apple.preference.displays"
end tellÂ
tell application "System Events" to tell process "System Preferences" to tell window "LCDTV16"
[code]...
I have a 15" Mid 2012 MacBook Pro (non-Retna) running OS 10.9.3.Â
View 9 Replies
ADVERTISEMENT
Apr 19, 2012
Since downloading the new OS Lion10, my screen display continues to change resolution (+4x) without any prompt, changing to a new app is the only way to go to the original resolution… Is there a setting that needs to be changed to stop this from happening
Info:
Mac Pro, Mac OS X (10.7.3)
View 4 Replies
View Related
Jul 14, 2010
I'm thinking of getting a MBP 13'', together with an external display. That way I get the portability of a MBP 13'' while maintaining an in-house big external display and 400$ in my wallet, only losing a bit of processor power (which is found negligible by most users).
My question has to do with resolution. MBP 13'''s resolution is 1280 by 800, right? My question is: if I buy a display with higher resolution, will I be able to enjoy that resolution? Or no matter how big my external display's resolution is, will I always be stuck with 1280*800?
View 2 Replies
View Related
Mar 25, 2012
I have been having some problems with my Macbook Pro. I have a new BenQ screen connected to it via the Mini Display Port to VGA adapter from Apple. No matter what I do, I cant seem to be able to change the resolution to anything higher than 1280x1024, which is a pretty stupid resolution to have on a 27'' monitor. Sometimes when I plug it in, it gives me the option to change the resolution to 1920x1080.
But when I select it, the screen goes black and displays the message "No signal detected". Now, as it happens, I have a copy of windows installed on a partition of my hdd, and the screen works flawlessly on it. full HD with 75 Hertz. So that shows that it is not a hardware problem, it has to be a software problem. I tried everything, including reinstalling OS X, and deleting the "windowserver" files. no success.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 7 Replies
View Related
Aug 6, 2010
I have a 27" imac and have been using an apple led cinema display with it. I have had no problems with the display until today. Yesterday I installed windows 7 via bootcamp and had some trouble with the second display being detected but after downloading all of the bootcamp updates it worked fine. Today I restart my computer back into OSX and the display does not work. I tried resetting the PRam or whatever but that didnt do anything. When I go to system preferences > display there is no longer an option to detect display and there are no longer options to change the screen resolution.
I spoke with an apple tech who has me installing an update but I dont think she really knew what was going on and I doubt this will work. When I reboot back into the windows partition the display works during start up and I see the windows logo. So I dont think its a hardware issue (also the display still works fine with my macbook pro). But as soon as startup finishes I get a black screen. Under the control panel windows still recognizes that there is a 2nd display attached and you can still drag items over to the other screen, I just cant see anything. All black.
View 8 Replies
View Related
May 14, 2012
I have a 2.93 GHz Intel Core 2 Duo (24" early 2009) iMac running OS 10.7.3 (Lion) to which I have connected an Apple Cinema Display as an external monitor using a Mini Display-to-DVI adapter. The iMac is set to 1920 x 1200 resolution and the Cinema Display is at 1680 x 1050, and everything looks great until I turn on mirroring. When I do this, the iMac screen loses its nice crisp screen resolution, but the Cinema Display still looks fine. Strangely, the pull down menu for displays in the menu bar still claims that the iMac is at 1920 x 1200 and the Cinema Display is at 1680 x 1050, but I don't think this is the case. Is there any way to keep the iMac at the higher resolution while mirroring?
View 1 Replies
View Related
Apr 13, 2012
i have an mac pro intel 2x2.66 OS: 10.4.11
my screen died so i had to get the 27 led and have the atlona converter between the display and mac ( which works fine)Â I logged into my main user and then into user2 my main user's display resolution is set to 2560 and user2 was set to 1920 i opened preferences and switched resolution in user2 to 2560 the screen flashed a bit and logged me out. then it would not log back in (it actually logged me out of the main user too)Â
what happens is that it starts to log in, there were a few finder windows open so, it starts to open those. but it doesn't show any icons or the text with available disk space... there's a beach ball for 30 seconds or so then it just logs back out.Â
it's totally user specific because i can log in and use my main user fine. i can even log in to another user account that i never really used.Â
I tried logging in in safe mode and get the same results. I can log in in with terminal with that user and see it's files, etc... I even tried using command line to move some prefs out out (i put them back after it didn't work).Â
I imagine some file related to the finder is corrupted or something? one of the prefs i tried to move was com.apple.finder.plist as well as bunch of others like windowserver desktop displays, etc...Â
View 11 Replies
View Related
Apr 26, 2012
I am trying to use external display with my Unibody Aluminium Macbook Pro (NVIDIA GeForce 9400M, 2.26Gh, snow leopard). Cable setting I use is quite complicated as it is: macbook: minidisplay port>hdmi> DVI D : display. Display is LG Flatron W2242T (4:3).So I hooked everything up and macbook detected display without any problem. The problem arises when it comes to resolution. Maximum resolution I can set (and in fact the only except 800xsomething) is 1152x870 and not only it is to low, but also it does not respect 4:3 ratio so it looks quite bad. So bad, that i cant really work on a setup like that. When I try to change resolution to any other, Display goes black. I tried using some apps, but they dont really work.
Info:
MacBook Pro (13-inch Mid 2009)
View 2 Replies
View Related
Nov 2, 2010
I just got the latest 13" Macbook Air and hooked it up to my Apple 24 inch LED Cinema Display. It works great but I've noticed that the resolution is not the same as when I had my 2008 Unibody Macbook attached to it. Everything is bigger (i.e. lower resolution) when the MBA is connected. I went into Display Preferences and changed it to the highest resolution but it didn't change. It's not that big a deal, but I thought I'd ask and see if anyone had any suggestions on how to get better resolution on the cinema display. Or is it not possible with the new MBA connected?
View 1 Replies
View Related
Oct 1, 2010
i changed my resolution on my mac mini to a size my screen cannot support and now have no picture to change it back. is there anyway of restoring the settings in startup
View 2 Replies
View Related
Sep 9, 2007
I'm planning on getting a cheap 12" powerbook off eBay. The only thing that's holding me back is that it's not a widescreen lcd. I want to buy an external monitor anyways, but I want a widescreen external monitor. Is there any way to set the resolution on the powerbook to a widscreen one?
View 1 Replies
View Related
May 18, 2009
I have a 24" external display and since 10.5.7 I cannot use it with the native resolution (1920x1200), the maximum I can pick is 1920x1080.
View 2 Replies
View Related
Jun 11, 2009
I installed Snow Leopard. Everything went well but I had one problem. I used DVI-HDMI cable to connect my Monitor. My monitor resolution is 1920x1200, and it doesn't have a DVI port. Only VGA and HDMI. Everything worked fine with Leopard, and I can see the 1920x1200 option listed in the System Prefs. But in SL, this option disappeared, instead they added 480p,720p,1080i, and 1080p.
View 6 Replies
View Related
Jul 1, 2012
I have an iBook clamshell with os X 10.3.9 running. I want to play some older games, like Diablo 1, squirrel kombat, etc.Â
What I can't find out anywhere is how to change the resolution for games. I know for older games (at least on PC) that there was a file that stored your settings, like sound card, resolution, etc.Â
I can't find anything like that here. Diablo 1 says that it needs to have a minimum of 640 X 480. I want to set it at 800 X 600.Â
Update, it looks like Diablo is running in classic mode (I thought it would run in OS X)Â anyway, the question is still the same!Â
Info:
iBook, Mac OS X (10.3.x), 300 Mhz, 160MB RAM
View 11 Replies
View Related
Apr 6, 2012
I use an external monitor from Dell with my Macbook Pro 13.3". For some reason I am not allowed to set this monitor at highest possible resolution? Or perhaps that's the best for this monitor which admittedly is quite old. But when I go into my system preferences it shows option for higher resolutions but doesn't allow me to select one.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 4 Replies
View Related
Jul 28, 2010
I have an 28 inch Dell LCD screen that has a native resolution of 1920x1200. Does the MBA support that resolution through the Mini DisplayPort? The specs on the Apple website list the following:
"Supported resolutions: 1280 by 800 (native), 1152 by 720, 1024 by 640, and 800 by 500 pixels at 16:10 aspect ratio; 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio; 720 by 480 pixels at 3:2 aspect ratio". But I read that the MBA can also do higher res.
View 2 Replies
View Related
Dec 1, 2014
I'm in the market for a new external display. I believe I have 3 options with the Thunderbolt(not mini-display)port on my Mac.Using my mini-displayport to VGA adapterUsing my mini-displayport to HDMI adapterUsing just a thunderbolt cable.I believe that there are Thunderbolt displays on the market (AOC has a 21:9 one I believe).
What is the maximum resolution for an external display for my MacBook Pro? Does my mac support 4K? Does it support 21:9? Specifications of my MacBook:
-MacBookPro9,2
-OSX 10.9 Yosemite
-13" mid 2012 not retina
-250GB SSD
-16GB RAM
-Intel HD Graphics 4000 1024 MB
Info:
MacBook Pro, OS X Mavericks (10.9)
View 1 Replies
View Related
Jun 4, 2014
I need to change resolution of external monitor in clamshell mode
View 2 Replies
View Related
Apr 26, 2010
I have a Macbook Pro I bought new in June 2008 (Not Uni-body). It's a 15 inch with the standard options. I want to make a desktop setup on a budget and I'm wondering if my MBP will fill up this display at the complete resolution (1920 x 1080) and if it will function completely with the peripherals on the monitor. [URL]. Here is the display I'm looking at. Seems like a good deal, but I haven't done a lot of shopping around. I don't do graphic design and as I said, I'm on a budget, so the Apple displays are out of the question.
View 1 Replies
View Related
Apr 20, 2010
the 13.3" glossy screen resolution?
I was at the Apple store for almost an hour this morning jumping between anti-glare and glossy MBPs. To my shock, I thought the smaller real estate produced much sharper, easier to read text on a glossy screen, but I love the 17".
View 11 Replies
View Related
May 7, 2012
I have the latest model of macbook pro 15" (entry-level one) and since a few minutes ago the screen has gone mad. It seems it has gone to lower resolution and the desktop doesn't fit on the screen anymore. I have to drag the mouse to the edges of the screen to see the parts that are hidden. I tried SMC reset, PRAM reset and it didn't fixed it.
View 7 Replies
View Related
Jan 11, 2011
I have an Acer 22" display (the x223w) that I have been using with my old powermac g4 for a few years and its been great. I recently got an Aluminum macbook and wanted to use the display with it at my desk. I got a cheap mini display-port to DVI adaptor from amazon and when I plug it in, the display looks a bit fuzzy! It is set to the same resolution as when it was hooked up to the powermac, but everything looks a bit bigger (doesn't this mean the resolution is lower?) and the text especially looks a little fuzzy. Is it the cheap adaptor? I have it set to 1680X1050 on both computers. I feel like I just want to adjust the sharpness, but the display doesn't have that option. Also, it seems weird since it looks fine with the powermac.
View 7 Replies
View Related
Feb 3, 2010
I have my MacBook hooked up to an external monitor of 1920 x 1080 resolution. I don't use the MacBook screen at all. Every time I turn on my MacBook it displays on the external monitor as it should, but at the MacBook's 1280 x 800 resolution, which obviously looks nasty and stretched on the big monitor. I fix this by simply putting the Mac to sleep and pressing a key on my keyboard to wake it up again; and it loads in the proper resolution. Is there a way to make it display 1920 x 1080 on boot up without having to sleep and wake every single time? Keeping my MacBook in sleep mode when not in use isn't an option.
View 1 Replies
View Related
Apr 20, 2010
I've just bought a MBP 15" and am wondering if I can connect a 24 inch monitor too make it a extended display. Can someone make a recommendation on what monitor (24 inch) display to buy? And Which connector to get so I get full resolution on the external display?
View 7 Replies
View Related
Jun 7, 2010
I got a Matte screen 2010 MBP. It comes with higher res screen. I personally find the text to be a little bit too small for my liking. Is it possible to uniformly make everything bigger so the higher res only make image and text sharper and not smaller than original resolution?
View 2 Replies
View Related
Sep 20, 2010
I've got a Samsung LCD HD TV with the resolution 1366x768 My TV (nej means no, and ja means yes), and a Macbook Pro 13" (2010 version, 2,4 GHz). I connect those two with a standard VGA cable, but I can't get the right resolution (1366x768). I've tried to make my Macbook sleep, so my TV id the primary screen, but I can't get the right resolution. 800x600 is the lowest, 1900x1080 is the highest, and the closest to 1366x768 is something like 1340x760 (not exactly that number, but it's pretty close). Can I get 1366x768 resolution my TV when I connect my Macbook?
View 2 Replies
View Related
Dec 27, 2008
I got a penryn MBP with up to date drivers and I just picked up a Samsung T220 1680x1050 that works fine in OS X but I can't seem to get this resolution to work right under XP. It does not show the whole screen and when the cursor moves to the edge of the screen it scrolls/pans from side to side like it doesn't fit.
View 1 Replies
View Related
Mar 4, 2007
I just purchased a Mac Mini and am using a DVI to HDMI cable to connect it to my 42" Sony KDF-E42A10. I am unable to achieve full-screen resolution and downloaded SwitchResX to manually adjust the display. Does anyone know the timing parameters for the Sony or how to achieve full-screen resoltuion?
View 1 Replies
View Related
Apr 30, 2012
I recently hooked my mac laptop to a display projector, and now when I log off or shut down the screen resolution reverts to a stretched view. I reset it to 1280x800 in System Preferences-Display, but it keeps changing back. I'm running OSX 10.5.8
Info:
MacBook (13-inch Early 2008), Mac OS X (10.5.8)
View 2 Replies
View Related
May 9, 2012
I have a 27" iMac and have connected a Philips 160e as a pallette monitor via a Mini Display Port to VGA adaptor. the iMac sees it but auto picks the wrong resolution 1280 x 1024 (stretched) instead of the Philips' 1366 x 768 @ 60Hz.
If I try to change the resolution the screen goes black which is symptomatic of using the wrong refresh rate, and of course I can make no further adjustments. esc does not get me out of the black screen.Â
What is worse the iMac seems to remember the wrong resolution/refresh rate after restarts.Â
I have tried Safe Mode (it stayed black) and booting off an external hard drive into another system (back into black if I change the display settings).
I have gone into System Preferences > Display > Color >unchecked 'Show profiles for this display only' > selected > Philips 160E in the list
It only contains .icc profile information, which I suppose is to be expected but is the only access I can find to any specific model data. The same display works fine with an older 24" iMac, using a different adaptor because of the different display port.
Somewhere OSX is storing the settings for the external monitor, I'd love to be able to trash it or change it back.
Info:
iMac, Mac OS X (10.7.3), The closest you'll ever get to there, is here.
View 7 Replies
View Related
