when i am trying to login into my user account on my macbook pro. it just starts loading but after that it doesnt display anything and keeps on loading for hours.Also when i logged into guest user it asked me to restart for the safari use only and after using that option i am just able to use safari with the displaying problems.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Software update popped up and I started it which restarted my Macbook as usual, but it has been loading for a couple of hours. In the meantime, I've tried turning my Macbook off and on to no avail, it stays in loading status (gray screen, small apple and the spinning gear). I've tried escaping, command shift Q, everything!Â
Info:
MacBook, Mac OS X (10.4.7)
iMac getting hotter after 1 hours ON but fan doesn't turn ON
Info:
iMac, Mac OS X (10.7.4)
I have brand new, mostly untouched, 13" rMBP running Mavericks (10.9.4) that crashes during sleep. If I close the lid and leave it for more than a few hours, I have to do a force shut down by holding the power button for a few seconds and turn it back on again. Â
I've already followed the advice of this article: OS X: When your Mac doesn't sleep or wake and have called Apple Support, who did nothing but read the article to me.
I have:
- reset the System Management Controller
- restored all defaults in Energy Saver preferences
- booted into Safe Mode to verify disk (unsure of whether or not this was effective at all)Â
In my Console, I am getting a line that says "com.apple.message.signature: Platform Failure"
According to this other thread - MB can't wake up from sleep anymore - it seems like it might be a hardware failure.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I'm installing Maverics from t'ha Apple Store.
Downloading took less than 30 minutes on my high speed connection.
After reinstalling Maverics is installing saying 'Time remaining: About 120 hours and 17 minutes'
i don't want to spend 120 hours!!!
Info:
MacBook Pro, Mac OS X (10.7.5), 8gb ram
I'm on a new 21inch iMac (3.06 GHz Intel Core 2 Duo, 8GB 1067b MHz DDR3, running 10.6.2) and I'm having problems in iCal (version 4.0.1) when I'm adding new events. When I add the event all goes fine until I come to put the time in. It seems to stick to 24hours display (08.00) but if I try to do likewise eg: 16.00 it changes first to 01.00 then 06.00.
Then lets just say I have a long meeting that runs from 09.00 to 12.00, the 09.00 time goes in fine but then it changes the 12.00 to 10.00. I've had a good look in preferences but I can't see anything I'm missing like a maximum length of meeting being set at 2hrs. I've tried having the day run from 1am in the morning to midnight, using 12 or 24hrs displayed at one time, and can't seem to crack it.
Which MacBook Pro screen size would you choose for the following?
- Viewing 6 or more hours daily, not hooked up to external display.
- Will be my main computer.
- Used for work and entertainment, heavy emailing, use of iWorks software, light photo and video editing, surfing, no gaming.
- Will go with me nearly everywhere, home, office, cottage, travel. Used on desk, heavily on couch, deck, kitchen, bed, cafe.
- Price not a factor.
13, 15, or 17" screen, please vote in the Poll.
after upgrade to lion, 2010 battery life dropped from 8-9 hours to 3-4 hours?
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I recently purchased my Macbook and I noticed that the battery power is jumping at least an hour every time I check how much battery power it has left. I wanted to know if this was normal.
View 9 Replies View RelatedThe title says it all really... Quite a simple problem that I can't find any answer to!
I've hooked up my 30" Apple Cinema Display to the new iMac 27" and the highest resolution I'm getting as an option is 1280x800... The iMac correctly detects the ACD as a Cinema HD display but limits my resolution. Why oh why?!
I turned my iMac on today and it starts up to the blue screen with the welcome screen but the loading bar doesn't load at all and it just freezes. Nothing has changed between today and yesterday
View 1 Replies View RelatedI've got this little problem with my 2months old iMac i5 since this morning. Yesterday everything was fine, I Watched a movie and updated some software, nothing illigal or damaging. Today I tried to boot my iMac, It showed the apple loading screen, with some kind of loading bar under it. I thought he just had to do that because of the update, so I decided to make breakfast and come back to check on it. When I came back, the bar was gone, but he was still loading! (15 minutes later). So I decided to reboot. still the same problem. I decided to boot from cd to see if this works, to select the startup drive. First I tried to fix the hard drive, but it is unable to fix it. I don't care to format my mac, but would like to know if there are other options to try first.
View 5 Replies View RelatedMy Imac 17" doesn't Start, it holds on loading drivers. i have bought it from Second Hand
Info:
iMac
i m using LG22inch monitor, it is a vga cable connected to a dvi adapter connected to a dvi miniport.
initially i tried to plug it in without AC power, but ext monitor screen is black. I surfed the net for some solutions, it says tat the AC power must be plugged in for the external monitor to work.
However, when i plug in AC power, the ext monitor is still sleeping, even though i can detect it in my profile settings.. what can i do to wake it up?
My 2006(ish) Intel core 2duo 2.16 mhz 20" imac wont start up, it only stays at the loading screen, how can I fix this? I have tried:
• safe mode reboot
• restart using p, r , command and option (resetting the pram)
• restart using the original Mac OS 10.4 disc
• restart so I get the image of the HD but I can't click on it to continue and restart again!    • single user mode (CMD+s keys at bootup, and then /sbin/fsck -fy)Â
It just doesn't do anything else than display the grey screen, the apple and the spinning wheel (sometime, I do get a scrolling bar also!). I managed to perform a hardware test from the Mac OS disc and there seems to be no hardware problem. Nothing works.It stays stuck on the grey screen, with the apple and the wheel turning endlessly.Â
Info:
iMac, Mac OS X (10.4)
We are using MacMail for a pretty important area and, for reasons we cannot fathom, the 'loading' wheel continues to display (not the multi-coloured spinner) and yet we know that there is nothing to download.
View 1 Replies View RelatedI'm trying to connect my Mac (OSX 5) to a flat screen TV. To do so I just bought a USB 2.0 to HDMI ® Display Adapter w/ Audio (1920 x 1080). The mini CD containing the DisplayLink software drivers that came with the unit won't fit in my Mac CD drive. I then tried to download the correct driver from the DisplayLink website, "DisplayLink USB Graphics Macintosh Driver" which appears to be appropriate for OSX 5 (at [URL]).
This proceeds through the installation steps, then bombs out with the error message that "The following install step failed: run preinstall script for DisplayLink software. Contact the software manufacturer for assistance." In the hopes of finding a compatible driver, I looked for an earlier version of the driver on the DisplayLink site, but couldn't find one.
Info:
iMac (20-inch Mid 2007), iOS 5.1.1
The last time my Mac Mail account quit due to the Imap plug-in problem, I realized it was my Icloud was on for mail. I had turned it off. Now I'm having the same Imap plug-in issue. But I can't get to my Internet accounts nor Icloud, since it couldn't load the preference pane. I've done the diagnostic tests before and haven't heard back from Support all summer.
Info:
MacBook Pro, OS X 19.9.4.
Sometimes my laptop will load a program automatically when I start it up. Most often it's Firefox, but it has also done this with OpenOffice. I've checked my Start Up items and neither of these are on there. Everything on my laptop is up to date and I've run Disk Utility. What could be causing this?
View 8 Replies View RelatedOS X 10.9.3 (13D65), iMac11,2, PIONEER DVD-RWÂ DVRTS09Â
Just stopped accepting discs today. No firmware or software updates in a few weeks
I am aware there are others threads of my problem however they date back years ago and after trying their solutions it still does not work.Â
After using Time Machine to restore my hard drive from a backup, I can't get past the white loading screen with apple logo after system restart during restore process. Ive gone into disk utility and repaired hard drive - it's fine. So I know this is a software glitch. I've also tried resetting SMC & PRAM (whatever those mean). No success and i cannot get past the white loading screen.Â
I'm running Mavericks (latest) on a late 2009 iMac
I have set in my Energy Saver Prefs to have my display turn off in two minutes and have the computer never turn off while plugged in. I am running MBP with NVidia GeForce 9600M (I have the option to go to "Better Battery Life" and switch it to 9400 if I so choose.)
Is anyone else experiencing this problem? Can somebody try to replicate it and tell me if it's just me? This happened when I installed 10.6.3, .2 was fine.
First Safari extensions weren't showing up.I was able to get the extensions tab back, but found the privacy tab won't display. I unknowingly jacked another thread, as I'm new at this, so now am posting my own. I'm running Safari 5.1.5 on OSX Lion, MacBook Pro 2009.
Info:MacBook Pro (15-inch Mid 2009), Mac OS X (10.7.3)
I installed Bowtie today and download/installed the theme pack but when I run iTunes and Bowtie, I do not see the CD cover on the Desktop. What am I doing wrong ?
View 6 Replies View RelatedI have a mid 2009 iMac that doesn't have Thunderbolt display, but has a mini-dvi port.Will the Thunderbolt cinema display 27" still work when connected to this mini-dvi port? I thought it would be better going for a thunderbolt display monitor rather than the older version, so when i upgrade my machine in the future it stays compatible.
Info:
iPhone 4S, iOS 5
My ten key pad that attaches to the keyboard doesn't display the numbers. The batteries are good and the green light comes on. What am I doing wrong?
Info:
Mac Pro, Mac OS X (10.7.3)
After several years of working properly, my display suddenly doesn't recognize the mac when starting up. If I turn off the power strip, turn back on and restart, the computer it works fine.
Info:
Mac Pro (Early 2008), Mac OS X (10.5.8)
I have a shell script running on a Linux machine to generate multipart mail messages. These display perfectly in Thunderbird (PC or Mac) but the html is missing when I open them in Mac mail. Switch to plain text and they look fine, but the html just doesn't display.
I've tried Snow Leopard and Lion with the same result.Â
I own both an iMac and a MacBook.Lately I've been trying to use [URL] and while the website does work, it displays totally wrong on my iMac ?I looked at all I could think of (not a newbie, but not savvy enough to go look in the coding to look for errors there).The one section from the site which displays correctly is one without a menu on both right and left. It's a blog. Here's a clue, I guess. I tried with both Safari 5.1.6 and Firefox 13.0, with the exact same result. But on my Macbook it displays perfect! I am using Firefox 12.0 on it. So I downgraded to Firefox 12.0 on the iMac... no success.Of course I also cleared the cache, closed the browser, and the computer... no luck.I then removed all plugins, since it was the only remaining difference...I thought it could be a difference in display... altough I couldn't see how... I changed it from 1920x1080 to the ones similar to my Macbook's (1280x1024 and 1280x720)... Of course it was the same, just more blurry. It doesn't make sense and I hate it when it doesn't make sense!Of course I hate it even more that I can't use that website on my iMac!!! (or with a lot of hassle).Â
Info:
iMac, Mac OS X (10.7), 21in.
I have an older(2008) MacBook and the MIni display to VGA adapter I purchased doesn't fit my book.
View 2 Replies View Related