the 13.3" glossy screen resolution?
I was at the Apple store for almost an hour this morning jumping between anti-glare and glossy MBPs. To my shock, I thought the smaller real estate produced much sharper, easier to read text on a glossy screen, but I love the 17".
I'm thinking of getting a MBP 13'', together with an external display. That way I get the portability of a MBP 13'' while maintaining an in-house big external display and 400$ in my wallet, only losing a bit of processor power (which is found negligible by most users).
My question has to do with resolution. MBP 13'''s resolution is 1280 by 800, right? My question is: if I buy a display with higher resolution, will I be able to enjoy that resolution? Or no matter how big my external display's resolution is, will I always be stuck with 1280*800?
I have been having some problems with my Macbook Pro. I have a new BenQ screen connected to it via the Mini Display Port to VGA adapter from Apple. No matter what I do, I cant seem to be able to change the resolution to anything higher than 1280x1024, which is a pretty stupid resolution to have on a 27'' monitor. Sometimes when I plug it in, it gives me the option to change the resolution to 1920x1080.
But when I select it, the screen goes black and displays the message "No signal detected". Now, as it happens, I have a copy of windows installed on a partition of my hdd, and the screen works flawlessly on it. full HD with 75 Hertz. So that shows that it is not a hardware problem, it has to be a software problem. I tried everything, including reinstalling OS X, and deleting the "windowserver" files. no success.
Info:
MacBook Pro, Mac OS X (10.6.8)
i changed my resolution on my mac mini to a size my screen cannot support and now have no picture to change it back. is there anyway of restoring the settings in startup
View 2 Replies View RelatedI installed Snow Leopard. Everything went well but I had one problem. I used DVI-HDMI cable to connect my Monitor. My monitor resolution is 1920x1200, and it doesn't have a DVI port. Only VGA and HDMI. Everything worked fine with Leopard, and I can see the 1920x1200 option listed in the System Prefs. But in SL, this option disappeared, instead they added 480p,720p,1080i, and 1080p.
View 6 Replies View RelatedI have an iBook clamshell with os X 10.3.9 running. I want to play some older games, like Diablo 1, squirrel kombat, etc.
What I can't find out anywhere is how to change the resolution for games. I know for older games (at least on PC) that there was a file that stored your settings, like sound card, resolution, etc.
I can't find anything like that here. Diablo 1 says that it needs to have a minimum of 640 X 480. I want to set it at 800 X 600.
Update, it looks like Diablo is running in classic mode (I thought it would run in OS X) anyway, the question is still the same!
Info:
iBook, Mac OS X (10.3.x), 300 Mhz, 160MB RAM
Since downloading the new OS Lion10, my screen display continues to change resolution (+4x) without any prompt, changing to a new app is the only way to go to the original resolution… Is there a setting that needs to be changed to stop this from happening
Info:
Mac Pro, Mac OS X (10.7.3)
I'm trying to write an AppleScript to change the resolution of my external display from 1920x1080 to 800x600 and back to 1920x1080 (it has a few issues and this fixes them, but I'm tired of going into System Preferences to do this all the time). I can get the script to open up System Preferences and option-click the scaled button (so all of the different resolutions come up), but I can't get it to select anything inside of the box where all of the different resolutions are (I can't find what I'm supposed to refer to it as anywhere and if I find something it doesn't work). Here's the code I have right now:
tell application "System Preferences"
reveal anchor "displaysDisplayTab" of pane "com.apple.preference.displays"
end tell
tell application "System Events" to tell process "System Preferences" to tell window "LCDTV16"
[code]...
I have a 15" Mid 2012 MacBook Pro (non-Retna) running OS 10.9.3.
1440x900 resolution of the new MacBook Air 13.3" screen is simply too high, making everything way too small and straining on my eyes. Is there a replacement LED LCD panel with a lower resolution (1280x800 like the old MBA) that could be retrofitted?
View 24 Replies View Relatedi am using a hackintosh for a week now. I am using it just to get used to Mac OS X because i am switching to a Macbook Pro in a couple months. I switched from PC to Mac officially now. OK, let's come to the main topic of this thread;-At first, my hackintosh couldn't get my gfx card, i couldn't find the driver(kext) so my resolution was very bad. Everything was huge and blurry. I couldn't even look at my 17" Samsung LCD screen. I made an entry to file which was something like this
View 14 Replies View RelatedI have altered the metadata in most of my songs by either changing the genre or album art. Will itunes change this data back to the original if I sign up for the Match service?
Info:
iOS 5.1
When I first setup my OSX laptop, my filevault and user login password were the same. At bootup, I only had to login once (with my username and password).I recently changed my OSX password but my filevault / disk encryption password was not changed. Now I have to login twice when I boot up (first with my old pass, then with the new one).Is there any way to change the disk encryption password so I can be in sync with my login password?I tried Disk Util > File > Change Password, but it is greyed out.
Info:
MacBook Pro with Retina display, OS X Yosemite (10.10.1)
The LCD on my uni macbook 2.4 has this manufacturer and model:
Manufacturer: 00000610
Model: 00009CA5
I've searched around to no avail. Anyone else have this screen, and know what the vendor/model is?
I am attempting to use an external DVI monitor using the mini port port and the mini port DVI adapter sold by apple. However the screen display on the external monitor does not match the Mac book display. All I get is a color Mac opening screen with no icons.apparently there is more to getting an external monitor going then just plugging it in.
View 2 Replies View RelatedI am trying to use external display with my Unibody Aluminium Macbook Pro (NVIDIA GeForce 9400M, 2.26Gh, snow leopard). Cable setting I use is quite complicated as it is: macbook: minidisplay port>hdmi> DVI D : display. Display is LG Flatron W2242T (4:3).So I hooked everything up and macbook detected display without any problem. The problem arises when it comes to resolution. Maximum resolution I can set (and in fact the only except 800xsomething) is 1152x870 and not only it is to low, but also it does not respect 4:3 ratio so it looks quite bad. So bad, that i cant really work on a setup like that. When I try to change resolution to any other, Display goes black. I tried using some apps, but they dont really work.
Info:
MacBook Pro (13-inch Mid 2009)
I just got the latest 13" Macbook Air and hooked it up to my Apple 24 inch LED Cinema Display. It works great but I've noticed that the resolution is not the same as when I had my 2008 Unibody Macbook attached to it. Everything is bigger (i.e. lower resolution) when the MBA is connected. I went into Display Preferences and changed it to the highest resolution but it didn't change. It's not that big a deal, but I thought I'd ask and see if anyone had any suggestions on how to get better resolution on the cinema display. Or is it not possible with the new MBA connected?
View 1 Replies View RelatedI use an external monitor from Dell with my Macbook Pro 13.3". For some reason I am not allowed to set this monitor at highest possible resolution? Or perhaps that's the best for this monitor which admittedly is quite old. But when I go into my system preferences it shows option for higher resolutions but doesn't allow me to select one.
Info:
MacBook Pro, Mac OS X (10.6.8)
I need to change resolution of external monitor in clamshell mode
View 2 Replies View RelatedI cannot see iTunes Match in iTunes screen ?
Info:MacBook Air
How much battery life do you loose when going for the High-res screen. Some people are complaining about low battery life with their high resolution screen and I was wondering if there is a connection.
Do the standard screen get better battery life. If so, how much better?
I have the older keyboard on my macbook which has the volume keys assigned to F3, F4, & F5 and so on with the other F-Keys of the older layout and just got a silicone keyboard skin which has the same layout of my iMac's BT keyboard (eg. volume on F10, F11, & F12 and you hit the function key to use the original assignments of these keys). I want to assign these keys to match what is printed in the skin and also so that I will always do the same thing on both my computers to just simplify my typing rather than having to type one way on my MacBook and another on my iMac. Can someone help me with the reassigning of all the F-Keys on my MacBook? BTW I'm running OS X 10.6.3 on my MacBook if that makes a difference.
View 2 Replies View RelatedRunning OS X 10.5 here with a 16:9 monitor. I want to play an old game which doesn't support widescreen, and renders very badly when forced to run in widescreen.I know I can force OS X to run at something like 800x600 in Display Prefs, but then it get stretched to fill the screen. Is there any way I can set a 4:3 resolution and then stop OS X from filling to screen (so I get a letterboxed effect instead?)
View 1 Replies View RelatedI need to check and reset screen resolution on my MacBook in order to connect it to a new TV.
Info:
MacBook, Mac OS X (10.6.8)
is there any way to up the resolution be it a hack or not can you up the resolution on a 12in ibook from 1024 to 1280?
View 5 Replies View RelatedIs there an aftermarket software that can help me change the resolution of the photo that I have taken? I have taken pictures with high resolution, but I won't be able to send them out using email. I need to find a third party software or to lower the resolution of the photo.
View 19 Replies View RelatedI'm running OSX 10.4.11 on a G4. The problem began after I tried installing Adobe Flash Player - I wasn't sure which version of the software to install so I tried both the Mac Intel and Mac PowerPC versions. It still didn't seem to work (I was trying to watch the football online) so I tried rebooting the computer. When it restarted, the font size and colours on the screen had all changed, there were now visible horizintal lines across the screen too. The resolution had changed, but I had only one resolution option in System Preferences - Display: 1280 x 768. I've tried re-starting the computer a number of times but it's still the same. My computer says I'm still on the 10.4.11 operating system.
View 1 Replies View Relatedi have an mac pro intel 2x2.66 OS: 10.4.11
my screen died so i had to get the 27 led and have the atlona converter between the display and mac ( which works fine) I logged into my main user and then into user2 my main user's display resolution is set to 2560 and user2 was set to 1920 i opened preferences and switched resolution in user2 to 2560 the screen flashed a bit and logged me out. then it would not log back in (it actually logged me out of the main user too)
what happens is that it starts to log in, there were a few finder windows open so, it starts to open those. but it doesn't show any icons or the text with available disk space... there's a beach ball for 30 seconds or so then it just logs back out.
it's totally user specific because i can log in and use my main user fine. i can even log in to another user account that i never really used.
I tried logging in in safe mode and get the same results. I can log in in with terminal with that user and see it's files, etc... I even tried using command line to move some prefs out out (i put them back after it didn't work).
I imagine some file related to the finder is corrupted or something? one of the prefs i tried to move was com.apple.finder.plist as well as bunch of others like windowserver desktop displays, etc...
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_1 like Mac OS X; en-us) AppleWebKit/532.9 (KHTML, like Gecko) Version/4.0.5 Mobile/8B117 Safari/6531.22.7)
Buddy called me, what is the significant difference between the glossy hi-res verses the anti-glare hi-res??? Is one better then the other??
I had some problems with my screen. I tried restart PRAM, NVRAM, SMC ... nothing better.
Macbook screen movie
Install OS X:
I've been planning to get a MBP over Christmas, and today I went to the local Reseller to get a USB-hub, and I played around with the 15" and 17" after since they were out, and I wanted to see if any other local stores had them. I've been planning on a 15" for a while, but when I looked at them right next to each other, it struck me that the resolution on the 15" is tiny compared to the 17". I realize that it's small because the screen is small, but it's so my smaller that the menubar took up so much physical space it became a problem for me. The 13" on the other hand, looked fine. The resolution is small, but the screen is small too so it fits.
Now I've been using a whitebook with 1280x800 for a while now, and the resolution is one of the primary reasons I'm not going to upgrade to a 13" MBP, but there is no way in hell I am getting the 15" with a fisher-price resolution! Is there any chance Apple could use a 1680x1050 panel instead of the 1440xwhatever? Does anyone know why the refurbs on the UK store are all 17"? There is not a single 13" or 15" there, and hasn't been for a while. Are there known problems on the 17" that I'm not aware of?
