MacBook Pro :: Default Resolution On External Monitor - Proper Display
Feb 3, 2010
I have my MacBook hooked up to an external monitor of 1920 x 1080 resolution. I don't use the MacBook screen at all. Every time I turn on my MacBook it displays on the external monitor as it should, but at the MacBook's 1280 x 800 resolution, which obviously looks nasty and stretched on the big monitor. I fix this by simply putting the Mac to sleep and pressing a key on my keyboard to wake it up again; and it loads in the proper resolution. Is there a way to make it display 1920 x 1080 on boot up without having to sleep and wake every single time? Keeping my MacBook in sleep mode when not in use isn't an option.
This happened before and a restart fixed the problem, but not anymore. Out of nowhere, I startup and I'm getting a message on the screen of my Samsung 2033SW that the resolution should be 1600 x 900 60mhz. This is a message from the monitor, not a Mac system message. But there is no setting for 1600x900 on the system prefs. I tried restarting, and so on, but nothing... In previous occurrences, somehow some way, I started to see the proper settings and then I just selected them in system prefs. But no longer. I'm stuck on 1024 x 768, the closest to the proportional resolution I'm after. I don't know of any way to force the proper resolution. Are there some .plist files I can delete? There are other issues with this machine which is old and I'm working around for now.
I've just bought a MBP 15" and am wondering if I can connect a 24 inch monitor too make it a extended display. Can someone make a recommendation on what monitor (24 inch) display to buy? And Which connector to get so I get full resolution on the external display?
I have recently purchased the mini display port to DVI adapter and a Belkin DVI to HDMI cable, to plug into my MacBook & Samsung SyncMaster 2032MW monitor. However when I connect this all up the display resolution is appalling, blurry and doesnt fit the screen. I have tried all the available resolutions turned mirror-mode on & off and its still shockingly bad! Also tried this on my LG TV and still the same. I have a Dell laptop which I connect via HDMI and the resolution is amazing. I thought the MacBook would output the same?
I'm using a MBA connected to a 52" TV with a 1920X1080 resolution when I teach. I often turn mirroring on and off depending on what I'm teaching and what program I'm using. When I turn mirroring on it defaults to a 1400X1050 resolution and I have to manually go into display settings and change it to the higher resolution. Is there a way to set the default settings so that it will always default to 1920X1080?
I'm thinking of getting a MBP 13'', together with an external display. That way I get the portability of a MBP 13'' while maintaining an in-house big external display and 400$ in my wallet, only losing a bit of processor power (which is found negligible by most users).
My question has to do with resolution. MBP 13'''s resolution is 1280 by 800, right? My question is: if I buy a display with higher resolution, will I be able to enjoy that resolution? Or no matter how big my external display's resolution is, will I always be stuck with 1280*800?
Just bought a new 22' LG monitor and I have the Mini DisplayPort to VGA. When I connect my monitor to my MacBook all is OK until I try to chose the 1680x1050 which is the LG's prefered resolution. When I chose it, my monitor turns to black, then after a while it shows the picture for a second, then black again.. Is this a 9400m fault, or the VGA adapter fault?If I try a MiniDisplay port to DVI, will it work in 1680 x 1050? All the other resolutions are shown ok..
I'm a new mac user. Just bought a Mac mini with Mac OS X Lion (10.7.4). I was messing around with the resolutions on the display settings. I set the resolution back to the 1080p where it was when I first started messing with it. Now the color is off, the screen is not how it was before I started tampering with resolution settings. I've tried recalibrating the color but its still off. When I start my mac up in Safe Boot the windows and color look normal as if I changed nothing.
I just found out that if I use the "mirroring" mode, and I set the resolution to 1680x1050 and 60hz(my monitor max resolution/hz), it's all kinda blurry... But if I put in sleep mode ma MPB and wake it up "switching on" my bluetooth keyboard, the monitor in my MBP doesn't even start and it just use the external monitor. In this case, there's no more blurriness but the settings are the same! Then, I can even turn on my MBP monitor (pressing some random key on its keyboard) and nothing change, still no blurriness...
How can this happen? By the way, there is another funny issue: if I use this "trick", the applications that should run in "fullscreen" (not really fullscreen, just the window that use all the screen size), like iTunes, don't do it anymore....
I have a Macbook Pro 13 inch 2010 model hooked up to a NEC Multisync EA231 WMI external monitor. The monitor is supposed to have a resolution of 1920 X 1080, but my computer only recognizes 1600 x 900 as the highest resolution. I've tried both mirrored and extended desktop, and I've also hooked up the monitor through a DVI adaptor and through a displayport cable. An Apple support person suggested using a dual-link DVI adaptor, but according to the Apple site this shouldn't be necessary for 1920 x 1080 resolution (I've also heard that it's a buggy piece of hardware). Any suggestions for getting optimal resolution?
I'm using a MacBook Pro OSX 10.6.4, have a simple dongle I purchased at the Mac Store which takes only DVI. The HP 2304 widescreen monitor only works with windows mirrored and has poor resolution - nothing like the 1440 Mac tells me I'm getting. I've used the build HP display adjustments with no joy. HP does not have Mac drivers for this display.
I have just connected an external 19" monitor to my 15" macbook pro. I am using both displays and that is fine, however I would like to be able to change the font sizes in my 19" monitor, because the default one is too small. I have to get awfully close to the monitor. I am not sure how i can display it better. When I tried changing resolution from 1440x900 to others, I didn't make it right, is that the only way? All I want is for screens in this monitor to have larger fonts (all programs, whether its safari, chrome, mail, etc). I should mention I am a brand new mac user.
I just started using my MacBook with an external monitor, and love this new set up. But, I have a quick question. When I hook it up, my screen looks like an enlarged version of what's shown on my smaller MacBook screen. This is okay, but I'd like everything (dock, menu bar, etc.) to be the same size as on the MacBook screen, only with extra desktop space, if that makes sense. Currently, since everything is just enlarged, I don't feel like I have any extra screen real estate - windows and the dock take up the same amount of space relative to the screen size as they do on the MacBook. My resolutions are 1280 x 800 on the MacBook and 1280 x 720 on the external monitor. I tried playing around with different resolutions but keep getting a No Signal error on the monitor when I use anything else. I know this is kind of a difficult question but does anybody have any ideas?
So I've had a 15" Unibody MBP since around November and I haven't been able to get it to work with my Hanns G 19" widescreen monitor. It should work at a 1440x900 resolution but its not even listed as an option when I hook it up. The monitor has both VGA and DVI inputs but I'm using the mini to VGA adapter (I picked up VGA to connect to a projector at school). I don't know if using the DVI adapter would do the trick or not and I'm not willing to waste $30 to find out as I'm a pretty poor college student at the moment.
I have a mbp 15" and it runs at 1200 x 800 (for example)let's say I have an external monitor which is 24" Can I run that external monitor at 1900 x 1200 (I don't know the real resolutions)would it work? If not, why? Is there a way I could make the MBP run at a higher resolution so it looks like iMac resolution?
I currently have a MBP1, 1 running 10.6.4 on an external monitor with the ideal resolution at 1920x1200. From time to time, when I wake my MBP from sleep through external keyboard/mouse to have it run solely on the external monitor, it sets the display at 1600x1200, so everything seems squished vertically. After a fresh reformat, the problem persists, though it is less frequent. It's just a minor annoyance that I can't seem to find a solution to fix permanently. I usually have to go to safe mode and adjust the resolution back to normal. Alternatively, only sometimes if I put it back to sleep and wake it up again with the external keyboard, it will detect the right settings.
I use an external monitor from Dell with my Macbook Pro 13.3". For some reason I am not allowed to set this monitor at highest possible resolution? Or perhaps that's the best for this monitor which admittedly is quite old. But when I go into my system preferences it shows option for higher resolutions but doesn't allow me to select one.
I have been having some problems with my Macbook Pro. I have a new BenQ screen connected to it via the Mini Display Port to VGA adapter from Apple. No matter what I do, I cant seem to be able to change the resolution to anything higher than 1280x1024, which is a pretty stupid resolution to have on a 27'' monitor. Sometimes when I plug it in, it gives me the option to change the resolution to 1920x1080.
But when I select it, the screen goes black and displays the message "No signal detected". Now, as it happens, I have a copy of windows installed on a partition of my hdd, and the screen works flawlessly on it. full HD with 75 Hertz. So that shows that it is not a hardware problem, it has to be a software problem. I tried everything, including reinstalling OS X, and deleting the "windowserver" files. no success.
I have a Samsung SB970 S27B970D 27-Inch Screen LED-Lit Monitor with native resolution of 2560x1440. When I connect it to my 2012 13" MacBook Pro via mini display port to DVI, I am unable to get anything better than 1080p.
Here's what System Information shows for my displays. Intel HD Graphics 4000: Chipset Model: Intel HD Graphics 4000 Type: GPU Bus: Built-In VRAM (Total): 768 MB Vendor: Intel (0x8086) Device ID: 0x0166 Revision ID: 0x0009 Displays:Color LCD: Display Type: LCD Resolution: 2560 X 1600 Retina: Yes Pixel Depth: 32-Bit Color (ARGB8888) Mirror: On Mirror Status: Hardware Mirror Online: Yes Built-In: Yes Connection Type: DisplayPortS27B970: Resolution: 1920 x 1080 @ 60 Hz Pixel Depth: 32-Bit Color (ARGB8888) Display Serial Number: H3HCA00500 Main Display: Yes Mirror: On Mirror Status: Master Mirror Online: Yes Rotation: Supported Television: Yes
As you can see, 2560 should be supported.
Also note that we have two different MBPs and two different Samsung monitors (same model, ordered at different times) that do the same thing.
As said, my current set up is an HDMI - DVI cable (HDMI to monitor and DVI to adapter) and my DVI - mini DisplayPort adapter, everything is connected fine but when I turn on the monitor, it says cable not found... and nothing is displayed on the screen but on the Macbook side of things, it sees the monitor is connected (I can extend the screen and leave the screen) but other than that, it appears I cannot get an image on the monitor, pressing every button on the monitor does not work either.
Any other information that may seem necessary, let me know. I tried clearing my PRAM and clearing the power and such but nothing seems to work.
Yesterday, when I tried connecting my unibody MBP to my LCD TV, I could not choose the right resolution which has always been 1366 x 768. I ran some updates before this issue occured.
I have an 28 inch Dell LCD screen that has a native resolution of 1920x1200. Does the MBA support that resolution through the Mini DisplayPort? The specs on the Apple website list the following: "Supported resolutions: 1280 by 800 (native), 1152 by 720, 1024 by 640, and 800 by 500 pixels at 16:10 aspect ratio; 1024 by 768, 800 by 600, and 640 by 480 pixels at 4:3 aspect ratio; 720 by 480 pixels at 3:2 aspect ratio". But I read that the MBA can also do higher res.
I'm in the market for a new external display. I believe I have 3 options with the Thunderbolt(not mini-display)port on my Mac.Using my mini-displayport to VGA adapterUsing my mini-displayport to HDMI adapterUsing just a thunderbolt cable.I believe that there are Thunderbolt displays on the market (AOC has a 21:9 one I believe).
What is the maximum resolution for an external display for my MacBook Pro? Does my mac support 4K? Does it support 21:9? Specifications of my MacBook:
-MacBookPro9,2 -OSX 10.9 Yosemite -13" mid 2012 not retina -250GB SSD -16GB RAM -Intel HD Graphics 4000 1024 MB
Just bought a new MacBook (OSX 10.6.1 w/4GB RAM) and ViewSonic 22" monitor. When I hooked it up (via DVI) and loaded the VewSonic drivers, I got the max resolution of 1920 x 1080. Earlier today, I came back and woke up my MacBook - and got only a snowy screen on the monitor and couldn't get anything on the laptop. Restarted and now, even though the display shows 1920 x 1080, it is not providing that resolution. The max for the laptop shows 1280 x 800 and that is about what is showing on the monitor as well. I keep resetting the resolution on the monitor at 1920 x 1080 - but the screen size doesn't change.
Recently I plugged my HD Monitor to my MacBook and the resolution changed (on the external monitor). I went to Display Preferences but I do not get any resolutions above 1600x1200. When I first used this monitor, I could use it at 1920x1080 and now I simply can't. I don't know if it's a PRAM issue. I reset it but nothing changed.
I'm using a HP 2309m monitor in VGA mode using the VGA-Mini display port adapter. I use the monitor with a PC in DVI mode, but I never use these connection at the same time. I noticed something. When I first used this monitor, Mac identified it as HP 2309 when I opened the display preferences. Now, it only recognizes it as Display.
I have an Acer 22" display (the x223w) that I have been using with my old powermac g4 for a few years and its been great. I recently got an Aluminum macbook and wanted to use the display with it at my desk. I got a cheap mini display-port to DVI adaptor from amazon and when I plug it in, the display looks a bit fuzzy! It is set to the same resolution as when it was hooked up to the powermac, but everything looks a bit bigger (doesn't this mean the resolution is lower?) and the text especially looks a little fuzzy. Is it the cheap adaptor? I have it set to 1680X1050 on both computers. I feel like I just want to adjust the sharpness, but the display doesn't have that option. Also, it seems weird since it looks fine with the powermac.
im using a 27" imac... recently just bought a mini displayport to HDMI cable to hook it up to my 24" Benq 241 monitor.Im pretty sure ive used this monitor before without a problem on my old macbook. The monitors max resolution is : 1920 x 1200 but im only getting the option of :
1080i 1080p 720p 480i 480p 1600 x 900 1344 x 1008
.... the rest go down in numbers selecting 1080p gives a fuzzy picture... and 1080i, is what looks liek the highest - but still really pixellated?
I have a 27" iMac and have connected a Philips 160e as a pallette monitor via a Mini Display Port to VGA adaptor. the iMac sees it but auto picks the wrong resolution 1280 x 1024 (stretched) instead of the Philips' 1366 x 768 @ 60Hz.
If I try to change the resolution the screen goes black which is symptomatic of using the wrong refresh rate, and of course I can make no further adjustments. esc does not get me out of the black screen.
What is worse the iMac seems to remember the wrong resolution/refresh rate after restarts.
I have tried Safe Mode (it stayed black) and booting off an external hard drive into another system (back into black if I change the display settings).
I have gone into System Preferences > Display > Color >unchecked 'Show profiles for this display only' > selected > Philips 160E in the list
It only contains .icc profile information, which I suppose is to be expected but is the only access I can find to any specific model data. The same display works fine with an older 24" iMac, using a different adaptor because of the different display port.
Somewhere OSX is storing the settings for the external monitor, I'd love to be able to trash it or change it back.
Info: iMac, Mac OS X (10.7.3), The closest you'll ever get to there, is here.
