OS X Mavericks :: Internet Sharing WiFi To Wired Ethernet
Jun 17, 2014
I have a Late 2013 MBP Retnia. I have WiFi access via a captured portal. I have other WiFi and Wired (Ethernet) devices that can not authenticate to a captured portal.
Question:
1) On the single MBP mentioned can I connect to the captured portal WiFi via one band (say 2.4) and then become a WiFI hotspot with the other band (say 5)?
2) On the single MBP mentioned can I connect to the captured portal WiFi via one band (say 2.4) and then share the Internet connection to the Thunderbolt Ethernet connector?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.3)
View 1 Replies
ADVERTISEMENT
Mar 19, 2012
I've been trying to connect over internet sharing from my Macbook pro to my i-pad 2 and am having some issues I hope someone can adress. I go to Settings>Sharing from ethernet then to wifi. I name the network choose a channel then add a password from there I get this error message.
Are you sure you want to turn on Internet sharing?
If your computer is connected to a network, turning on Internet sharing may affect the network settings of other computers and disrupt the network. Contact your system administrator before turning on Internet sharing.
Info:
MacBook Pro
View 1 Replies
View Related
Mar 29, 2010
Airport Express wifi MacBooks and the hard wired ethernet MacMini no simultaneous connection via hub Network consists of Cable Modem; Airport Express (1 ethernet port) 2 x wifi Macbooks; Mac Mini (ethernet )
4 Port ethernet hub connects the network OS X 10.5.8
Configuration
Port 1 on hub cable modem
Port 2 on hub Airport Express (not Airport Base Station)
Port 3 on hub MacMini
Both connect without the other plugged into the hub but not simultaneously The first to connect seems to gain control of the connection
View 2 Replies
View Related
May 22, 2012
For specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info:
eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
View 1 Replies
View Related
May 9, 2012
I'm wondering how would it be possible to make my MacMini (last generation) as an access point 802.11n.I have setup an internet share between Ethernet and WiFi, but the bandwith looks to be more 802.11g than 802.11n.
Info:
Mac mini, Mac OS X (10.7.3)
View 2 Replies
View Related
Jun 25, 2014
I am wondering does the 2010 Mac Pro support wifi sharing through a ethernet connection like current Macbook Pro's etc
View 2 Replies
View Related
Dec 10, 2010
So far I haven't been able to get an airport connected computer to share its connection via ethernet with another. Am I doing something wrong or is this not possible?
View 2 Replies
View Related
Dec 27, 2010
ive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
View 5 Replies
View Related
Feb 12, 2007
Recently got a Mac pro. However my room only has one network socket going into my router, this goes to ethernet port 1. Internet works fine, no issues. However my old desktop (that the MP replaced) can't get online now - no second network port from the router into the room the computers are in. I have a crossover cable that I've used to connect the 2nd MP ethernet port to the PC ethernet port. However I can't get internet access on the PC. If the PC and port 2 are on their own subnet (not the router/port 1 subnet) I can get file sharing going between the MP & PC, but cannot figure out how to get the router/MP/PC on the same subnet together using both ethernet ports of the MP. I have already tried enabling internet sharing under system prefs etwork, but it doesnt work. Network: Router (connected to internet) at 192.168.1.1 - connected to mac MP port 1 - 192.168.1.2 - works fine in connecting to the net MP port 2 - 192.168.255.1 - works in networking to PC for filesharing PC - 192.168.255.2 - works in networking to Mac for filesharing Any combination of 192.168.1.xxx for the MP port 2 and PC, they can't fileshare anymore and there is still no internet for the PC. Anyone know how to do this?
View 17 Replies
View Related
Jan 18, 2010
I know the steps for internet sharing airport card's internet access to another computer via ethernet cable, but how do i set it up to share it with a router via ethernet cable?
View 1 Replies
View Related
Feb 12, 2012
I've upgraded to Lion and everything's fine apart from one problem: using my iPad to access home shared iTunes content on my mac no longer works when my mac is asleep. That's a change in behaviour from Snow Leopard; I used to be able to sleep my mac and then wake it over wifi using either my iPad or iPhone to access all of my home shared libraries. The mac screen used to light up for ten seconds and then go dark again, but it served me the files.
Lion seems to go into a deeper sleep which it can't be woken from. If I attempt to wake my mac from my iPad within about ten minutes of putting my mac to sleep then home sharing seems to work and lets me use the home share libraries, but if I leave it any longer than that then the mac seems to fall into a coma and can't be woken. The weird thing is that I still see a "shared library" folder on my iPad, but when I click on it nothing happens. I think my Time Capsule is listening for wifi access and issuing the magic packet to the mac, but the mac just ain't listening.
I'm using a Time Capsule in bridge mode from an ADSL modem and I've accepted a TC firmware update last week and I'm on lion 10.7.3. I've tried using Ethernet to connect the mac to the TC (and temporarily disabled the wifi connection) but that still doesn't work. Also, note I'm NOT suffering from the problem that 10.7.3 seems to be giving a few other people - my mac reconnects to my wifi just fine when I wake it up manually. For the record, This was an upgrade, so there's still a tick in "wake on network" in power settings and home sharing on iTunes is still configured the same as it was before.
Info:
iMac 27" i5-760, Mac OS X (10.6.7)
View 14 Replies
View Related
Feb 20, 2010
Is it possible to share the internet through a protected ethernet network on os x?.. and if so, how can I do it?
I'm well aware that I can make a protected wireless network.
View 2 Replies
View Related
Mar 23, 2008
I'm renting a house for the week with several friends, and there's only one ethernet port. I figured I could plug one friend's Powerbook G4 into the ethernet, go into Sharing, turn on Internet Sharing, and then nearby computers could borrow the connection - this isn't working. The network doesn't even display on my other friend's powerbook. The little upwards arrow does not display ontop of the airport icon in the menubar, which I think it's supposed to, what's going wrong? I have "Personal Web Sharing" turned on under "Services," still no go...
View 3 Replies
View Related
Mar 11, 2010
I was wondering if anyone knows if its possible to share my LAN internet to an XBOX 360 using the Apple USB ethernet cable (for the Macbook Air) on my Macbook Pro 13"? I've tried several routers, and all have them have failed me giving me massive timeouts and sudden disconnects. I think this should be a good solution.
View 2 Replies
View Related
Apr 3, 2009
Ive got a pretty fast internet connection at home and I have just realised that when I plug my iBook and desktop pcs into my wireless router ethernet (LAN) ports I get a much faster internet connection speed compared to the wifi.I.e. 12-17mbps when through ethernet and when I connect to the wifi I get 2-4mbps. My computers are all located in the same room no more than 5 metres away from the router.
View 4 Replies
View Related
Aug 25, 2009
i share a house with my brother, lucky me He got a PC with Vista in his room. I got a lovely imac in my room. He gets the broadband cable direct into his room. It averages 40 mbps download , 1.67 upload. We use a wireless Netgear router one thats suppose to handle N wireless and i pick the wireless up on the airport extreme in my imac. Unfortunately i only get about 12 mbps download , 1.20 upload, even though i'm only in the next room. We both play WOW online. It works so much better on his PC cos of the internet speed. Could I use a gigabit ethernet connection between the PC and imac, to share the internet and still play WOW independently?
View 1 Replies
View Related
May 28, 2012
After switching to a new provider and getting a new dsl modem (a fritz!box fon 7390) I tried to setup my homenetwork again. Now the weird thing is: my Mac Mini running OSX Lion Server doesn't seem to be able to connect to the internet over its ethernet port, only when using a WiFi connection...When it's connected with ethernet it can reach the dsl modem without any problems, but it can't ping/telnet or anything else through, only over WiFi... As long as I use the mini servers WiFi connection everything works fine, but that doesn't make any sense to me.I've checked the servers setting and the Fritz!box settings and I can't seem to find anything obvious. Of course I could just go on and use the WiFi connection...
ps: all the other computers can connect fine using either wifi or regular lan connection... I even tried the exact same cable with another laptop just to make sure...
Info:
various
View 1 Replies
View Related
Jun 29, 2012
I am on a Mac Mini connected to the Net via a FON wireless router and Ethernet directly to my broadband modem. I have had problems with both the modem and an Airport Extreme, which eventually died, but I am back up again with the modem via the FON router.The odd thing is that I can't get Ethernet to work over a direct connection to the modem. Diagnostics tells me that the ISP and Internet fails. I can connect to the modem over Ethernet, however, change its settings etc. in my browser. There are solutions mentioned here involving changing the etc/authorization file, but wouldn't that also affect the WiFi if that was the problem?
In short, Ethernet connection to modem works. WiFi connection to FON router and then to the ISP and Internet works. But the Ethernet configuration does't go that last bit, it only works locally. Using that route, I can't connect to the outside world. I have restarted the modem, the computer etc., but that should not be the problem as both works over WiFi, using the same settings for the modem. How do I best troubleshoot this? I am getting an AirPort Express, perhaps it will work better with the modem that the computer itself, but I doubt it.
Info:
Mac mini, Mac OS X (10.7.4), 2.3 GHz Intel Core i5
View 3 Replies
View Related
Nov 4, 2010
I've got an ethernet cable and i thought i'd share my internet connection through 'sharing' under network preferences, to allow the windows 7 computer to get online as well.
the windows laptop cannot connect to the internet. I've managed to do this before with no problems when i was sharing a USB 3G dongle's connection over wifi.
View 5 Replies
View Related
Jul 7, 2009
I just got a new MacBook and have been copying files via Ethernet from my pc. One thing I noticed is that whenever an Ethernet cable is plugged in nad hooked up to the router, the Internet stops working on both mac and pc. However, my torrent client on my pc continues downloading so it's not actually stopping, the browser is just failing to connect as is the official network status. Why is this?
View 1 Replies
View Related
Oct 8, 2010
I got a crapy land lord who only wants to allow me ONE wifi MAC address (my macbook laptop)
But i own two iphones, and my 3G signal is pretty weak in the hood where I live.
Is there a way i can have my macbook be as a router for my iPhones?
View 1 Replies
View Related
Feb 28, 2009
i'm trying to setup a mini wifi hotspot in my shoe box of a bedroom. I have a mac pro, iBook and iPhone and i can't seem to get either the iBook or iPhone to connect to an "Airport Internet sharing" connection.
I thought it might be the thick aluminium box hampering the signal but i'm literally about 6ft from the MP tower and really shouldn't have problems from that range should i?
View 2 Replies
View Related
Apr 26, 2012
I'm sharing my Mac's internet connection over wifi to my iPad when I'm at work. Is there a way to reduce the output power of my wifi? I don't really need a signal beyond my cubicle. How would I reduce the wifi power settings to as low as possible on my Mac when it's in ad hoc mode?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
Mar 22, 2012
Ever since updating to OS X 10.7.3 I can't get my Internet Sharing to function for wifi. I enable this to use my iPod at home. The computer 'says' Internet Sharing is on but my iPod searches and doesn't find a signal. Plus, the four bars at the top right of the screan do not change to a solid color with the arrow pointing up like it used to when enabled and working.
Info:
MacBook Pro, Mac OS X (10.7.3)
View 2 Replies
View Related
May 24, 2012
Equipment: iMac 21.5" 2.5GHz Quad Core i5
Internet Set-up: Cable modem to iMac Ethernet
Problem: After recent update to Lion 10.7.4, my Wi-Fi signal via Internet Sharing keeps dropping. Have multiple iDevices failing that were working perfectly with 10.7.3 (Nook and iPhone 4). iPhone shows full Wi-Fi signal strength and works for a short time after reset (via Wi-Fi off/on, Internet Sharing off/on). Continues to show full Wi-Fi signal strength but loses connection after 1-2 minutes. And not just internet connection; I can't transfer pics/vids from iPhone to iMac either. Have switched to a channel no one nearby is using (channel 9) to no avail.
Info:
iMac, Mac OS X (10.7.4)
View 4 Replies
View Related
Dec 10, 2014
I have an iPad and a Mac Pro so I set up internet sharing on the Mac Pro. It looks like it's working from the Mac Pro side -- the little WiFi icon on the menu bar has an arrow -- but the iPad simply will not connect to the internet. My Wifi connection preference tells me the correct network is selected, and the icons to the left of the name look right, but just right of the network name there's a spinning circle icon which means it's still waiting for a connection.
Both were just upgraded to the latest OS (Yosemite 10.10.1 for the Pro, iOS 8.1.2 for the iPad) today, which means both were restarted today.
Info:
Mac Pro, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Jun 2, 2014
I have a iMac in my office connected to ethernet and wifi. Can I network/share files with the Macbook Pro at home I use for travel? Both have Mavericks OSX.
Info:
MacBook Pro, Mac OS X (10.6.8)
View 6 Replies
View Related
Aug 26, 2014
My iMac is very slow. It only works on wifi. Ive got good cat 6 hard wire to cox business and its fast internet. but it wont work on the network. it says i need an ip address. it says the internet is connected but needs an ip address. Ive got it on dhcp auto. but not working. All other computers work fine with dhcp. It says the computer is connected but does not have an ip address. Not possible if its set in dhcp as that is supposed to give you a rolling ip address. Ive got a cisco gigabit switch that is working well with 10 - 15 other computers working fine on it. Ive changed the port multiple times in the switch. rebooted of course. nothing works.
Info:
iMac, OS X Mavericks (10.9.4), 2007 model.
View 1 Replies
View Related
Jun 28, 2014
I am trying to use the Internet Sharing Option on my Macbook Pro. But when I go to System Preferences>>Internet Sharing, I see that the internet sharing option is greyed out and is not editable, I mean I am not able to select it or make any changes to it.
View 1 Replies
View Related
Aug 24, 2014
my internet connection speed is sufficient to handle the largish files I may have to deal with. I have recently moved house and gone from an area with high speed fibre optic broadband to an area where this isn't available and as such my speeds are significantly lower than before. Downloading isn't shouldn't be such a problem - I have gone from 30mbs downstream to about 5mbs. In tests I have been able to download fairly large files in an acceptable time. Uploading finished work is more of a concern as the upstream is severally nobbled. if there is a way to set a folder on my Mac that my client could access and download from without me first having to upload to a server (Dropbox, WeTransfer or FTP)? Is this possible and if so would this make a difference in terms of speed or would the recipient still be restricted by my upload speeds
Info:
iMac, OS X Mavericks (10.9), Mid 2007, 4Gb RAM
View 2 Replies
View Related
