I was wondering if anyone knows if its possible to share my LAN internet to an XBOX 360 using the Apple USB ethernet cable (for the Macbook Air) on my Macbook Pro 13"? I've tried several routers, and all have them have failed me giving me massive timeouts and sudden disconnects. I think this should be a good solution.
View 2 RepliesI know the steps for internet sharing airport card's internet access to another computer via ethernet cable, but how do i set it up to share it with a router via ethernet cable?
View 1 Replies View RelatedI have a macbook (10.5.1), and I am trying to share my internet through Airport -> Macbook -> Ethernet Cable -> Xbox 360 to get onto Xbox Live.
-What do I manually put as my IP?
-Subnet Mask is 255.255.0.0 or is it 255.255.255.0
-What do I put as my gateway?
Now, every time that my IP has confirmed, the DNS fails. How do I configure this properly?
I was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
View 1 Replies View RelatedI have been searching around the forum for this answer and I haven't found anything specific. Here is my network setup.
Bedroom:
Modem --ethernet-- Airport Extreme --ethernet-- iMac
Living Room:
Airport Express (Wirelessly Connected to Airport Extreme) currently setup for AirTunes using a bridged connection.
What I want to know are the specifics of running an ethernet cable from my XBOX 360 to the Airport EXPRESS and using that as my internet hook up to get on Xbox Live.
I am having trouble using my ibook g4 as a bridge between my xbox 360 and my wireless router, here is my setup.
Internet---Wireless Router---iBook G4(with airport extreme)---xbox 360 via ethernet
These are the settings I am using:
iBook g4
Internet Sharing from airport to ethernet port
The ethernet port has a static ip of 10.0.0.1 and a subnet mask of 255.255.255.0
Xbox 360
IP 10.0.0.2
Subnet mask 255.255.255.0
Default router 10.0.0.1
Primary DNS 192.168.0.1 (My Router's IP)
Secondary DNS xx.x.xxx.xx ( a dns server assigned by my ISP)
When I run check the xbox live connection it comes up with
Network(good) Internet(Fail) Xbox Live (Fail)
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
View 2 Replies View RelatedI'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
I've got an LED unibody MBP and for a month or 2. I've been internet sharing my connection from my HSDAP broadband dongle to my Xbox 360 through an ethernet cable. It took me AGES to get going! A while ago I upgraded to Snow Leopard and it broke it. I have no idea why, and i spent hours yesterday trying to get it to work again to no avail! [URL]. That is the guide I am using and for the most part its fine. Long story short, the DNS keeps failing. "Move onto DNS. Enter the IP address of your wireless router (in my case, "192.168.0.1") in both the primary and secondary IP address fields". Thats the part I am having problems with, as I don't use a wireless router, i dont know what to put in.
View 1 Replies View RelatedMy xbox and mac are both connected by router by an Ethernet cable. When I go to internet settings it say I might violate the terms of service of my isp(att yahoo dsl) Does doing the steps in the above link, will it affect anything that will violate the TOS, is their another. Safer way to connect the 360 to my mac?
View 1 Replies View RelatedSince it's possible to use a Mac as a wireless access point. I want to share my Ethernet connection through WiFi (not vice-versa), can I connect my Xbox 360 easily with that network or I have to painfully change the settings?
View 5 Replies View RelatedI have my xbox 360 connected to my macbook through ethernet. On my mac i have internet connection sharing enabled from airport to ethernet. Everything works fine apart from the xbox saying I have a strict NAT.
I made sure the ports were all configured to work with my router, and UPnP is defiantly enabled on my router. I even tested to see if it was something to do with my firewalls, but even with them turned off, I still get this NAT error
How to share my Mac's Internet Connection to my Xbox 360. I have enabled Internet Sharing from my AirPort to the Ethernet, and changed the IP settings on the Xbox 360, but I keep getting "cant connect to your network hardware using a static ip".
View 1 Replies View RelatedHere is my setup, and I have it all configured correctly, and everything works great. I am able to stream stuff off of the iMac with Connect360, and internet works great. I am not having any trouble configuring the ethernet port to share the airport connection. What I am trying to do now is have the 360 connect to the Media Center PC located downstairs hidden out of sight.
Because the 360 is getting it's connection from my iMac, would it still be able to connect to this MCE PC? (the only PC in the house, whose sole purpose is to be a DVR and eventually, serve the 360 up with cool MCE hacks such as a web browser for the 360, and Hulu). I am not about to buy a WiFi adapter from MS for $100, as that is overpriced and the iMac connection works fine.
I've been trying to connect over internet sharing from my Macbook pro to my i-pad 2 and am having some issues I hope someone can adress. I go to Settings>Sharing from ethernet then to wifi. I name the network choose a channel then add a password from there I get this error message.
Are you sure you want to turn on Internet sharing?
If your computer is connected to a network, turning on Internet sharing may affect the network settings of other computers and disrupt the network. Contact your system administrator before turning on Internet sharing.
Info:
MacBook Pro
For specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info:
eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
After upgraded to maverick, I can't get internet via ethernet cable. The wireless is still working fine.
Info:
iMac (24-inch Early 2009), OS X Mavericks (10.9.3)
So far I haven't been able to get an airport connected computer to share its connection via ethernet with another. Am I doing something wrong or is this not possible?
View 2 Replies View RelatedI connect to the internet mainly through an ethernet cable, connected to my own base for ethernet connections (Might be a router, but doesn't connect directly to the internet) which is connected to the main Linksys router on the other side of my house, which even has a wireless connection.
Regardless, this setup has worked without issue for a long time now, but all of a sudden now, I cannot connect to the internet (On my Mac).
I have tried unplugging the routers, for extended periods of time, plugging them back in, but I cannot connect to the internet. Whats awkward, is that when I check the Network settings in the System Preferences, it says clearly is that the Ethernet Cable is connected (Which it is), and as a backup, I have even connected to my Wireless Network through AirPort (Which says it is connected), but I cannot connect to the internet through Firefox, or any instant messaging service.
On the main computer, with the main router, the internet works fine. When I try to load Firefox on my Mac, it sometimes takes a long time loading (On a blank screen), and never loads usually (With occasional loads, but usually does not connect).
I just got the new macbook, with snow leopord, and is running on 10.6.2. My internet is really slow when I connect it to my linksys router. It is a wrt54g router. And I am using a WPA2 password. The internet works fine with the three other laptops in my house. But is slow when I connect with wireless to the router. But when I connect to the router with a ethernet cable it works really fast.
View 8 Replies View RelatedMy father in law had a power failure at the house, and since then, he cannot connect to the internet via DSL Modem connected via ethernet cable. Being that he is 1000 miles away, I am trying to diagnose via phone. System Info: Imac 17", purchased new around 2006- Intel chip, running Tiger OS
Symptoms:
- Cannot connect via ethernet
- When searching system profiler, "Built-in Ethernet" shows up, but no MAC address
- In Network settings, he can see the various connection ports, but cannot check the box on "Built-in Ethernet" to turn the port on... won't let him.
- Wireless is not an option, I don't want to be 24/7 tech support
Diagnosis? I am thinking that the power surge may have fried the ethernet port on the motherboard.
Repair Solution: Planning on picking up the Apple USB Ethernet adapter. I know it doesn't have the correct drivers to run on Tiger, but found a driver online that claims it allows use of the usb adapter on Panther on up.
Questions - Does this sound like a fried ethernet port? Any other easy diagnostic tests I can do? Does the USB adapter sounds like a decent solution?
the xp laptop cannot access the wireless internet and the router is too far away to use.Therefore i'm wanting to share my mac's internet with the xp laptop via an ethernet cable.I've searched for hours and I cannot find the correct way to do this.
View 4 Replies View RelatedI have a MacMini (about 3 years old, running OS 10.6.8).
Ever since I got it I have connected it to the internet via WIFI (using an Airport Express connected to a switch - connected to a router). No problems.
But now I have pulled a cable to my office and want it connected via ethernet.
But as soon as I plug in the ethernet cable I loose my internet connection. The DSL light on my router (Zyxel Prestige) flashes a bit and turns off.
So there is no internet connection.
But the network works (i can connect my XBox to the MacMini - which are both connected to the switch)I have tried removing everything (Switch, Xbox and Airport) so it's just the the router with my MacMini connected to it. Still looses internet. The routers DSL light goes out, and I have no internet connection.
Info:
Mac mini, Mac OS X (10.6.8)
ive successfully done this before with 10.5 and xp and am trying to replicate with 10.6 and win7.
my imac connects to internet via airport. i want to share that internet with a win7 box via ethernet cable. i've turned on internet sharing in sys prefs but to no avail.
Recently got a Mac pro. However my room only has one network socket going into my router, this goes to ethernet port 1. Internet works fine, no issues. However my old desktop (that the MP replaced) can't get online now - no second network port from the router into the room the computers are in. I have a crossover cable that I've used to connect the 2nd MP ethernet port to the PC ethernet port. However I can't get internet access on the PC. If the PC and port 2 are on their own subnet (not the router/port 1 subnet) I can get file sharing going between the MP & PC, but cannot figure out how to get the router/MP/PC on the same subnet together using both ethernet ports of the MP. I have already tried enabling internet sharing under system prefs etwork, but it doesnt work. Network: Router (connected to internet) at 192.168.1.1 - connected to mac MP port 1 - 192.168.1.2 - works fine in connecting to the net MP port 2 - 192.168.255.1 - works in networking to PC for filesharing PC - 192.168.255.2 - works in networking to Mac for filesharing Any combination of 192.168.1.xxx for the MP port 2 and PC, they can't fileshare anymore and there is still no internet for the PC. Anyone know how to do this?
View 17 Replies View RelatedI just got a new MacBook Pro, but my wife uses my old 1.25GHz Alum. PowerBook. My MB pro flies, but unfortunately, the wireless ethernet on my old PB is slow as hell. I've got 11+GB of free space left on my hard drive and Safari or Firefox are the only applications I have open. I also have a cable internet connection with wireless through my 1st Gen Airport Express, yet it's still slow.
View 4 Replies View RelatedI just got a new MacBook and have been copying files via Ethernet from my pc. One thing I noticed is that whenever an Ethernet cable is plugged in nad hooked up to the router, the Internet stops working on both mac and pc. However, my torrent client on my pc continues downloading so it's not actually stopping, the browser is just failing to connect as is the official network status. Why is this?
View 1 Replies View Relatedi can't connect to the internet via my ethernet cable, but this is a weird case. What's weird about it is that all my settings are O.K. (appletalk on and set to ethernet, tcp/ip set to ethernet, dhcp) and my iMac is recieving a 192 address, but it still can't connect to the internet. The dhcp settings are correct, because they are the same settings used on all my other devices (at least those that use internet anyway), and they all connect to the internet just fine. Whether via an ethernet cable, or Wi-Fi.
Info:
iMac, Mac OS 9.2.x
Is it possible to share the internet through a protected ethernet network on os x?.. and if so, how can I do it?
I'm well aware that I can make a protected wireless network.
I'm renting a house for the week with several friends, and there's only one ethernet port. I figured I could plug one friend's Powerbook G4 into the ethernet, go into Sharing, turn on Internet Sharing, and then nearby computers could borrow the connection - this isn't working. The network doesn't even display on my other friend's powerbook. The little upwards arrow does not display ontop of the airport icon in the menubar, which I think it's supposed to, what's going wrong? I have "Personal Web Sharing" turned on under "Services," still no go...
View 3 Replies View Related