Windows On Mac :: Use Disk Utility To Create OSX Partition / Working After Manual Partition
Jan 12, 2010
First some background info. I recently purchased a 1TB hard drive for my 13" MBP, and I am about to do a clean install of OSX 10.6 and Win7 64bit on separate partitions.
And I want to setup the partitions before I install using Disk Utility. The reason for this is because I'm under the assumption that when creating a NTFS partition its better for the disk to be blank so it can put the MFT(Master file table) and MFT Mirror wherever it wants instead of some random spot on the disk (that way disk writes will be faster). The MFT thing was true when converting a FAT32 disk to NTFS. Nativity formatted NTFS disks were always faster then ones converted from FAT32, because the MFT was spread out instead of at the start of the disk.
I'm worried that installing OSX and then using the bootcamp utility will cause the MFT on my NTFS partition to end up in a un-optimal place and disk Reads/Writes will be slower.
Ok, so here's my questions.
1.) Should I be using a GUID Partition Table or Master Boot Record(Remember OSX 10.6 and Win7)?
2.) Should I use Disk Utility to Create a the OSX partition and then leave the second partition as Free Space? / Or should I use a third party utility and make the OSX partition and the NTFS partition at the same time?
3.) If I do create the partitions Manualy, will bootcamp still work correctly?
4.) Should I Use Journaled or Case-Sensitive Journaled on my OSX partition?
I know all of the questions were stupid, but there isn't any info on the web about it.
I have installed 2x Intel X-25M Gen2 (SSDSA2MH160G2C1) 160GB SSDs in RAID 0 (striped) in my 17" uMBP. Second SSD was installed using a MCE Optibay in place of CD-ROM. I used the OSX Disk Utility to create the stripe partion with no problems. I currently have 10.5.8 loaded and will be loading 10.6.0 tonight and doing some simple GeekBench benchmarks.
I have a Mac Mini and on the internal drive I have Snow Leopard installed on the first partition and I'd like to install Snow Leopard Server on the same drive on another partition (I'm new to Mac, this is my only machine and my only drive, and this is only for testing purposes, so don't bother with stupid questions about why etc).
The problem I have is that I can't seem to create the necessary partition in Disk Utility. I have shrinken the Snow Leopard partition to get some free space and I've created a second partition for Server but for some reason I can't choose the options button to select GUID. The button is grayed out, see attached image.
What am I doing wrong? Or is it not possible to have two OS partitions on the same internal drive?
I have a 3 TB disk that I used for video files that I now want to use for backup. So I wanted to erase and partition the drive to wipe it clean. So after going into Disk Utility and "trying" to erase and partition the drive, it now only shows the drive and no volumes.I cannot create or partition volumes. I tried verifying and repairing the disc but that didn't do anything. The only buttons available are Verify, Info and Burn. What do I do to use the drive again?
I have a Lacie 1TB external drive. I'm trying to create another partition on it using Disk Utility so that I can use one of the partitions for Time Machine. When I go to add another partition, or even just resize the existing one, I get an error saying drive must be HPFS+ with Journaling enabled. It is. I've seen reference to this error in searches, but have not found a solution. Is there a fix for this, or another tool that I can use to re-partition my drive without wiping out existing partition? I have about 450GB worth of data on the drive that I might be able to store somewhere else temporarily, I would just prefer not to have to go through that....
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
I had windows vista installed but suddenly the audio decided to become faulty, after spending a day trying to fix it i realized I have a windows 7 install disc so i might as well just replace vista with windows 7. I didnt take care of vista or ever register it so it became quite a task to upgrade so i just deleted the partition and went to create a new one and just do a full install of windows 7.
I made the partition but the wrong format, so i removed it through boot camp assistant and created another, except now it keeps giving me the "back up the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using boot camp assistant again" Now, I'd love to do this, except I have no idea what I'm doing and WHY this error has occured. After becoming frustrated I switched from my imac to my macbook pro and received the same error when trying to create a partition. So any help on exactly what I need to do would be a HUGE help. I only use windows for music production (I know, seems backwards, but I use Sony Acid and FL Studio so I'm stuck with Windows)
I noticed in disc utility that under the erase tab it has the option to format a drive to fat32. If I create a windows partition using bootcamp and then go into disk utility and erase to fat32 will this allow a boot into the xp drive? My xp disc keeps restarting before it gives me the opportunity to format the drive to either a ntfs or a fat so I need a way around this?
My Computer: 2.8 GHz intel Core 2 Duo Mac, running OS X Ver. 10.5.8. I've partitioned my hard drive before, but in order to get more space on my Windows partition I have made a disk image using a program called Winclone. I also backed up important files to my external hard drive, and then used disk utility to erase and make a new partition so I could restore the Winclone disk image I made and have everything back. What I'm concerned about is I've been waiting for this new partition (65 GB) to finish being made and its taking a while. I read that if you stop the process it could damage the OS X side and you could lose all your files.
I started to run time machine about 10 minutes ago and set the destination to my external drive for backup (Its a huge drive, it can hold 650+ GB so I'm not worried about running out of space.) Do I stop Disk Utility and risk it? Do I let it run? Do I kiss my computer goodbye and pray that Time Machine backed everything up right onto my external hard drive? I don't know if Time Machine is working correctly because I started it after I began to partition my hard drive. What to do. Should I let Time Machine back everything up, the disconnect my external and end Disk Utility?
I am planning to upgrade my Windows 7 32 bit bootcamp partition to Windows 7 64 bit. I know I have to do a clean install to do this, so I am planning to wipe my Windows partition and start from scratch. I am trying to figure out how to remove my bootcamp partition though. If I use the bootcamp assistant, it seems like it will only give me 231gb of space back for Mac OSX. I have a 250gb HD, so where is the extra space going since my Windows partition is 42gb? Can I just delete it with Disk Utility to recover the space back? Could I possibly screw this up by using Disk Utility?
I can boot into bootcamp with no problems. I have been wanting to be able to open the bootcamp in Parallels. Here is the issue:
1. The partition 'disk0s3' is greyed out in Disk Utility. It is not mounted. Mounting does nothing.
2. For reference, the Windows 7 is formatted as NTFS. It is a Windows 7 64-bit install
3. Verify disk does the following: Verifying volume "disk0s3" ** /dev/disk0s3 Invalid BS_jmpBoot in boot block: efbbbf Error: This disk needs to be repaired. Click Repair Disk.
4. repairing does the following: Verify and Repair volume "disk0s3" ** /dev/disk0s3 Invalid BS_jmpBoot in boot block: efbbbf Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can"t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
I have stuff on the Windows partition that I don't want deleted. I'm really stuck on this -obviously, I can just continue to boot into bootcamp, I just would rather open it from Parallels. I'm not sure what or if I made some mistake in setting up Bootcamp, I thought I followed the directions to that. I do know I formatted the partition as NTFS during the install - as I think Windows 7 requires it. I have tried installing NTFS-3G - it is installed, but didn't do any good when trying to mount the drive.
I can't find my windows partition it just shows as Macintosh HD. Although when I go into bootcamp it shows there is still 20gb assigned to windows but I screwed it up as I tried to extend the amount of GB I allowed to windows without reinstalling it. However I don't know what to do in Disk Utility now?
Model Name:MacBook Pro Model Identifier:MacBookPro7,1 Processor Name:Intel Core 2 Duo Processor Speed:2.4 GHz Number Of Processors:1 Total Number Of Cores: 2 L2 Cache:3 MB Memory:4 GB Bus Speed:1.07 GHz Boot ROM Version:MBP71.0039.B0B SMC Version (system):1.62f6
I would like to "Back-up", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it?
Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?
Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows...) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.
Got my first MacBook Pro about 2 months ago and I have been enjoying it to full effect, installing programs such as logic studio and photoshop cs5 on it. Recently, however, I decided that I would like to access some of my windows based programs when I am on the road and don't have my desktop pc with me. So I bought a fresh copy of 32-bit Windows 7 Ultimate and sat at my macbook, put the disc in and then loaded up Boot Camp. I went through the menu options, decided that I wanted a 50GB partition, leaving my Mac OS drive at 182 GB with 83GB to spare. However, when I started partitioning, after about a minute it stopped and this error message appeared: "The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows.".
I tried cleaning all my temporary files and deleting some files in my downloads that were quite large and I restarted my machine. The problem persisted. Is there a solution to this problem that does not involve doing all this rubbish with a fresh install of Mac OS? I don't have any method of backup apart from a couple of 4GB flash drives..
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
I have run the Disk Utility verify function against my system partition. It tells me there are minor issues that need fixing up and I should run the repair disk function, by booting using Command-R and using the Disk Utility to repair the drive.Problem is, when I boot using Command-R and select Disk Utility the partition is shown greyed out and the Verify and Repair options do not work.I think this could be because the partition is encrypted. The utility does not offer me the chance to unlock the partition with my passphrase.How can I repair the filesystem errors on this partition?
I own an iMac with a 250 GB HDD along with a Macbook that originally had a 120 GB HDD. So when I purchased my 1 TB external HDD this summer, I partitioned the external so I could back up both my iMac and Macbook via Time Machine. Seeing how small the Macbook HDD was, I allocated roughly 300 GB of my external to it, with the iMac getting the rest.
Originally I had 2 partitions on the internal 500gb hd in my MBP, one was 455gb the other was 10gb that I used to mess around on. I do not remember what format the small partition was in last, it may have been FAT32. I wanted to delete the small partition and consolidate into one partition. My OSX partition is formatted macos extended. I went to Disk Utility and deleted the small partition by selecting it and clicking "-." There was grey space where the partition used to be. No problems here. Most of the options in Disk Utility are greyed-out.
I cannot select a different partition scheme. When I try to resize the partition either by dragging it to cover the grey space or by manually typing in a larger size, there is no way to apply the changes. The "Apply" button is continually greyed-out (See Image). If I try to resize the partition and then close the window, Disk Utility alerts me that I have an operation in progress and that unsaved changes will be lost. Disk Utility is not letting me resize my main OSX Partition, it appears that I do not have appropriate permissions to make this change - I am the only user/admin of this machine.
I having trouble resizing an external harddrive of mine. It is a 500gb Lacie drive, and inside it has two partitions: time machine (250gb) and my stuff (250gb). I want to make time machine 150gb and make My Stuff occupy the remaining space. However, when I enter Disk utility, there is no dot between the partitions that I can drag. When I pull the corner, the disk gets smaller, but after resizing there is still a blue rectangle outlining where the old disk was. The partition "time machine" is used for time machine backups, but I have deactivated backups in Preferences, and Time Machine is currently "off". I have included an image for clarification. How can I resize the partitions the way I want them?
My new 2010 hexacore Mac will have 24G memory, an OWC Extreme Pro 120G SSD (positioned in the lower optical bay) and four 2TB WD RE4 drives. I'll use my old Synology 209 NAS (two 1TB WD Green Raid 1 drives) for TM backups over 1000Mbps Ethernet. Yes, I'll need to upgrade to a larger NAS very soon. This will be my first Mac Pro (have MBPs and iMac) and will be used for web design and development (mostly Adobe CS5 products).
The SSD will be used for boot and application files. I plan to use Disk Utility to create a 1+0 Raid array for data files. For a Scratch disk, should I: 1) create a partition on the 1+0 Raid Array for Scratch 2) partition a chunk of the SSD for Scratch 3) attach a spare external 2.5" WD drive via Firewire 800 for Scratch
Based on my reading, it seems that option 1 makes the most sense but I'm not entirely sure if you can partition a 1+0 array with Disk Utility. I'm pretty sure option 3 is quite silly but wanted to toss out the idea. Lastly, are there any generic recommendations on scratch volume sizing?
I have a 640GB external USB hard drive that I use for time machine currently. I would like to go in and add a partition to load movies to and plug it into my PS3. Can I use disk utility to create a new partition without erasing the stuff already on the disk?
And then is it possible to format a partition larger than 32GB as FAT?
i am trying to format a brand new 120 GB hard drive via an external USB 2.0 enclosure. About 25 minutes ago, I selected the "erase" option and slected the Mac OS Extended (Journal) Volume format. For the last 25 minutes, disk utility has been saying that it's creating a partition map. It's doing nothing.
I have reason to believe my enclosure may be faulty. (I had a similar problem on an old hard disk and thought that the problem was with the disk; now I know.) I need to know: How do I disconnect/eject the hard disk without damaging it? The eject option in Disk Utility is grayed out. If I attempt to quit Disk Utility I get a warning telling me I could leave my disk inoperable.
I installed Ubuntu on my iMac, and it made 2 new partitions: DISK0S3 and Linux Swap. Here's what my disk utlity looks like: When I try to remove Linux Swap, it says that the partition (map is too small. When I try to remove DISK0S3, nothing happens and it keeps running forever before I press +Q to quit.
I would like to know the difference between the options 'erase' and partition' in disk utility. Under 'erase' there are several options: under 'security options' there are 4 options: don't erase data, zero out data, 7-pass erase and 35-pass erase.
I just bought a 1TB Lacie d2 Quadra and want to partition it in 2 partitions. As said in the instructions, if you want more than 32 GB on my "PC" partition I need to use Mac's disk utility. The thing is I don't have the option to partition in NTFS, only MAC OS extended (journaled, etc..) and FAT32. But I need a lot more than 32 GB for my PC stuff. Now how can I do that? I need to backup some stuff from my Windows XP (bootcamp) really soon! And I want to be able to plug it in another PC and be able to transfer both ways. How can I get the NTFS partition option with disk utility? or is there other softwares for that? In all what I want is about 500 GB for MAC and 500 GB for PC (NTFS)!
First off I am new to Mac's and I am trying to repartition my harddrive. i did it once before and was successful and when i tried to adjust the size, windows kept getting errors.
On the advice of my friend he told me to completely wipe out my machine and reinstall Mac OS 10.4. I have since reinstalled SL 10.4 and downloaded bootcamp. However, I do not see a boot icon in my applications or utilities folder, but I do see a disk utilities icon.
When I click that and click the only hard drive that is there and try and partition it, the slide bar will not work for me to divide the hard drive into the size i want and none of the fields or dropdown boxes will work.
