My PowerBook G4 crashed and I need data from it. I already had bought an external drive and had begun loading some fotos and music. Now I'm at a friend's Mac, firewired and all, and the external drive (visible in the disk utility) isn't to be found.
I don't want to erase and reformat, obviously, ... can I drag it onto the desktop from the disk utility?
Disks I put in the Superdrive, external hard drives, or anything in the USB or Firewire (thumbdrive, etc) -- nothing shows up on the desktop. All are visible in Disk Utility. USB thumbdrives and external hard drives are visible in the sidebar in Finder, but disks are not (only disk utility).
Because of this I can't burn a disk because the disk is not being recognized. In Disk Utility, the external hard drives appear mounted and can be opened in Finder, but why aren't they appearing on my desktop (they used to)?
The HDD in my wife's black MacBook (2007, I think) won't boot up. I've run Disk Utility and have decided it's pretty much dead. I have a Carbon Copy backup, so the data is fine. I've tried replacing the drive twice now, and the MacBook simply won't "see" the new drives. When I install the drive, nothing shows up in Disk Utility (run either from the install disc or the Carbon Copy backup drive in a USB enclosure).
The new drives are formatted (I even copied the bootable backup to one of them), and the computer sees them just fine if I install them in a USB enclosure and hook them up that way. When I put them in the computer, though, no dice. Her old, corrupted HDD still showed up in Disk Utility when I reinstalled it, but the new drives don't.
I am trying to repair my mac. But in disk utility, the hard disk is not visible to proceed. Its showing disk0 -> volume with only 1.79GB. and all the options are disabled. The capacity of my mac book pro was 500GB.
Info:
MacBook Pro, OS X Mavericks (10.9)
I have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
Did a fresh Bootcamp install of Windows 7 on my MBA running 10.9.4, switched back and forth a few times and now the BOOTCAMP partition doesn't show up in the left pane in Finder. I hopped into Disk Utility to see what was going on and it was there, just not mounted, so I clicked mount, was told it couldn't be mounted, and it suggested I run first aid on it. I clicked Verify, nothing useful to me, then Repair, and got quite a lot of feedback that I do not understand, and then after that it was still unmountable.
I tried to copy everything it said into a pastebin because it was very long with lots of starting and stopping and counting percents inbetween, but it was over 500kb and that's the limit for free users on pastebin, so here's a trimmed version. [URL] .... I tried booting into Windows after that, and it jumped into System Repair. Apparently, according to Windows, my Boot Manager is missing or corrupt... and since I still can't access it from the Mac side of things, I thought I'd just wipe the partition in BootCamp Utility and start over.
Except instead, I get this error: "Your disk could not be restored to a single partition.An error occurred while restoring the disk to a single partition."
Disk Utility let me wipe it but I still can't mount it, either, again suggesting I run first aid on it (this does nothing). I can't boot into the Mac's Recovery mode either. It just jumps straight to Internet Recovery. When I hold option upon boot, all three partitions show up (Mac, Recovery, Windows), but when I click the recovery one it loads for a bit and then the laptop just instantly shuts off.... Have I corrupted my internal harddrive perchance?
Info:
MacBook Air (13-inch Mid 2012), Windows 7
i just erased my external hard drive through disk utility my accident. I had VERY important files and the 1tb was full.
View 3 Replies View RelatedI have an external hard drive that was used on a PC. I want to use it on a Mac. I went into disk utility and did an erase. (Extended Journaled and in security options changed it to zero out data). I can now use it on the Mac how ever it is telling me that there is 54.1 MB of used space. I want to have access to this. How do I do it?
View 4 Replies View RelatedI wish to change partition scheme, sizes, in an external drive. All the partitions are MacOS extended (Journaled) and they map, according to the layout in Disk Utility, as follows: Partion 1, 2, 3,4 where 1 is at the top and 4, the bottom. I want to make partition 2 larger, so I decreased partition 1 by half. Now the layout is 1 a, 1b, 2,3,4., where 1b is now free space. Disk Utility will not allow me to increase the size of partition 2 by dragging the corner. Which of the following options (if any) will allow me to increase the size of partition 2, without erasing the data, using Disk Utility:Select partition 2 and manually writing a new value in the size box, equal to the present partition’s size plus the free space?If I delete partition 1 completely, will I then be able to increase the size of partition 2?If I delete partitions 1, 3, and 4, will I then be allowed to increase the size of partion 2?Is there another option?
(Actually, partition 3 is an eDrive, a data recovery utility created by TechTool Pro 7, so I don’t really know how it’s formatted.)
SeagateHD 1.5TB USB drive.
Info:
Time Capsule 802.11n (2nd Gen), OS X Mountain Lion (10.8.2), MacBook Pro, iBook Dual USB
I've been running a Toshiba 1TB external drive on my Mac Pro tower and it's been working fine. But yesterday it wouldn't mount. I could see the drive in Disc Utility, but the partition wouldn't mount. I brought it into work where I'm running an iMac and it mounted just fine. Why would it stop working on one computer (where it was previously fine) yet work okay on another? And how do I get it working on the tower?
Info:
Mac Pro, iOS 7.1.2
I have an external 750GB hard drive that I previously formatted as FAT 32 because I wanted to be able to plug it into Windows computers as well. I was not very thoughtful at the beginning and I just created one big 750GB partition. I currently have 450GB used and about 300GB free.
I would like to create a new partition in the free space without losing the data I have in the disk, and format the new partition as Mac OS Extended to use it for Time Machine backups. Presumably Disk Utility can do it, but when I go to the "Partition" tab it says "This partition cannot be modified" and the "+" sign below it is grayed.
The hard drive is a 1TB Western Digital my book I bought it in January I think. I tried to format it to Mac OS Extended (Journaled) when I got it but for some reason every time I try to erase the part thats named disk3s2 or partition the main one it stops a little before half way through. I don't think its the hard drives fault so I called apple about it one day and they helped a little but it didn't work. Thanks in advance if you can help me. Also a few times I waited about seven hours for it while I was at school and when I came home it didn't move.
View 8 Replies View RelatedI have a Lacie 1TB external drive. I'm trying to create another partition on it using Disk Utility so that I can use one of the partitions for Time Machine. When I go to add another partition, or even just resize the existing one, I get an error saying drive must be HPFS+ with Journaling enabled. It is. I've seen reference to this error in searches, but have not found a solution. Is there a fix for this, or another tool that I can use to re-partition my drive without wiping out existing partition? I have about 450GB worth of data on the drive that I might be able to store somewhere else temporarily, I would just prefer not to have to go through that....
View 1 Replies View RelatedI've recently converted to the Mac-side:
I'm having difficulty with my external hard-drive, here's the info on that one:
Disk Utility won't allow me to mount the drive, I've tried using a number of softwares to read it (working under the assumption that it's an NTFS drive), including Tuxera and Paragon. I have too much stored on the hard drive to empty it back onto my old computer, and so I'm not able order to re-format it.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I have a 1/3 full external drive that is currently formatted for MAC OS External.
I want to partition the drive in half and use the 2nd partition for Windows FAT32.
However, when I try to do this with Disk Utility it does not give me the FAT32 option.
Will running the 'repair disk' disk utility on an external drive screw up any of the files on my external hard drive? I only want to run it because I can't transfer a file from my HD to the external...it's a 6 gig video file in quicktime format, and I'm getting 'error 1309', which I understand is related to file size on FAT32 format. I know it's a huge file, but I've moved others to the external that are over 20 gigs with no problems (iMovie projects, etc). Anything I can do to get this file moved to the external?
View 6 Replies View RelatedI had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
It turns out I deleted everyting without noticing.
The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
So now I have two files on my hard drive and no idea how to recover the 'delted' files.
I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
I am wondering if there is any free methods to recover these files at all
Info:
MacBook Pro (13-inch Early 2011)
Odd stufff, I have a 500 gig Lacie ext HD that my user uses on her Vista machine...
I am setting up a replacement for the Vi$ta machine, which is a 24 inch imac.
I plugged in the ext HD and nothing happened after I powered on the ext HD.
I checked disk utility and it showed up but as a 2TB size ext HD...
I unplugged the Lacie and plugged it back in and all the info showed up correctly.
But ALL the buttons under "First Aid" are greyed out so I cant verify permissions, disk, or repair disk or permissions.
Information:
imac 24 inch
Mac OS X (10.5.8)
Having trouble with my backup drive. It's a 1TB WD My Passport Ultra.
The drive mounts in Finder, but is extremely slow. In Disk Utility, the drive shows the correct disk space usage and number of files; but in Finder it only shows the folders/files at the root level of the drive, and each has a size of zero bytes with no items:
What is happening? How can I access the data (it's obviously still there if DU shows the files) and (possibly) fix this?
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.4)
Have just downloaded Adobe Flash and went to do permissions where I found the file "install_ flash_ player_ osx." and also the icon with "Flash Player" directly underneath.These are listed under the list of drives to select on left side of pane.Is this normal? Do I need to do permissions? On HD?
View 14 Replies View RelatedAnyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
View 4 Replies View RelatedI have an external 500GB Freecom USB HDD with two Data partitions on it (FAT32 and NTFS). With a Windows tool, I made the two partitions smaller in order to free up some space (ca. 200GB) for an additional Mac OS Extended (Journaled) partition. This partition I wanted to create with the Mac OSX 10.6.4 Disk Utility. When I pluged in my USB HDD in my new iMac it mounted the two partitions, NTFS and EXT32 and the Disk Utility tool also showed the free (unpartitioned, almost 200GB) space on the HDD. Then, I chose to create a new Mac OS Extended (Journaled) partition and let the tool do it. ...which I probably shouldn't have done. Disk utility stopped and showed an error message saying that it cannot read the partitions anymore and that it needs to be closed. No partitions can be mounted anymore since then on this HDD. Here is the logfile entry of Disk Utility (unfortunately, it's in German):............
View 2 Replies View RelatedSo, basically, ever since Lion, my external harddrive has had trouble being found while using the USB slot in the Airport Extreme. Anyway, so the HDD can be seen in the Airport Utility under Disks but I actually cannot access it through Finder. I have ticked the boxes to show External Harddrives in Finder and all that, so I am pretty connfused. All I use it for is watching movies off and TV shwos so I can save space on my MacBook Pro. So yeah, no Time Machine stuff which I usally see about this topic
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI'm not sure if this qualifies as a hardware issue or a software one. I recently swapped out from a PC to a iMac. I wanted to keep all my old files so I pulled out the internal HDD and placed it in a HDD Enclosure and connected it via USB 2.0. Now the Mac recognized it and all seemed well, but a hidden folder I need access to doesn't show up on my drive. If it helps, this drive was the master drive on my old PC and the file I'm trying to locate was on the desktop.
View 24 Replies View RelatedI have a new imac (love it!) and have installed vista on a 32Gb partition using Boot Camp. I was planning on saving files I create in vista on the external Hard drive. But I can't see it when I'm in Vista so can not save files to it. It is a terrabyte disk and is used by Time machine. Is there anyway I can save to it or should I add another external HD just for windows, I can see it when I go to system hard ware (it says seagate HD etc but there is no info on files sizes etc-there is a button which says populate but I dare not press it as I'm scared it will screw up my back ups) Another irritation is that when I reboot back to mac it throws out the internet and I have to reset the modem and router so it works again.
View 3 Replies View RelatedI've been having trouble with my Western Digital 160GB HD, its one of the MyPassport ones or what not. It used to work like a charm and had for a while but a couple of days ago it just stopped being able to be read or even recognized on Macs. I tried this laptop and another macbook pro and both would not show the HD on the desktop or even Disk Utility. When I open the Disk Utility when the ExHD is plugged in, I just get that loading circle and it will just do that indefinitely. Same thing with System Profiler as well.
I don't believe I damaged it in anyway, I hear no clicking and it seems to "boot" smoothly when it's plugged in, so would this mean its a corruption issue? I have been plugging this in to different Macs recently, (3 total) and one of which runs Leopard while the other two run Tiger. Would that cause the issue? (the reason I ask is that this all started after I had plugged it into the different OS.) I haven't tried to plug it into a PC yet, i'm going to do that today but I had tried doing the CMD + Option+ P + R reset till the second beep and I also did a hard reset by unplugging everything and waiting a bit then holding the start button down until it beeps.
I've connected my new Iomega Minimax with a firewire cable directly to my iMAc but nothing appears on my desktop.
Info:
iMac
I'm trying to format my external harddrive with disk utility to Mac OS Extended (Journaled) but it keeps coming up with this error.
View 2 Replies View Related