I have an external hard drive that was used on a PC. I want to use it on a Mac. I went into disk utility and did an erase. (Extended Journaled and in security options changed it to zero out data). I can now use it on the Mac how ever it is telling me that there is 54.1 MB of used space. I want to have access to this. How do I do it?
View 4 Repliesi just erased my external hard drive through disk utility my accident. I had VERY important files and the 1tb was full.
View 3 Replies View RelatedI have a hard drive with about 250 gb of film and music on fbut it's formatted as HFS+ which windows cant read! I need to partition the drive to make windows be able to read at least a portion of it. But If I run disk utility and create a partition will it erase the info I already have on there? I don't have this data else where so I hope it wont!
View 6 Replies View RelatedI try to securely erase big hard drive and Disk Utility in Tiger says Secure Erase. Pass 1 of 7. Estimated time 123 hours
Is this progress bar only for erase 1/7 or for all 7 passes (1-7/7)?
1. To grab all the files I need/don't want to lose (photos, music, documents, etc.)2. Then completely erase the 500GB HD so I can then install it into the new Macbook Pro and install Leopard.(I'll then externally connect the 160GB HD that came w/ my Macbook Pro and add the files I've already copied into that 160GB HD into the 500GB Leopard installed HD in the new Macbook Pro)So, currently my 500GB HD is connected to my Macbook pro and I want to completely erase everything so I'll then have a completely clean hard drive, to then install into the Macbook Pro, add the installation discs and install Leopard into the 500GB HD.
View 14 Replies View RelatedI have a 2TB Western Digital My Book Studio FW800 external that has 5 partitions, connected to my 2011 iMac. I had help doing the partitions and don't really remember the reasoning, but one is just for my SuperDuper! backup, one is Miscellaneous, one for movie clips off my camcorder, one for misc scanned photo's and one for my genealogy research. I back up using Time Machine to a Time Capsule and also to this WD hard drive with SuperDuper!
Recently I'm getting a pop up message that "Mac OS X can't repair the disk "Genealogy"'. And it needs to be reformatted. It's become a read only disk. When I look in Disk Utility it shows all the partitions as "Mac OS Extended (Journaled)" EXCEPT for the one in question. I also noticed that there are a lot of files with "date created" being the same date in 1969! These files may be letters I've written or photo's I added to that partition within the last few years.
I think I have to completely reformat the entire external hard drive to repair this, but I want to make sure. Because it's going to be a major hassle backing it all up to another external (having to get one first) and then figuring out how to make the files that have turned "read only" in that one partition, back to their original state! Does this sound right, that I have to reformat the entire external hard drive? And how do I get the read-only files back to their original state.
Info:
iMac, Mac OS X (10.7.3)
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
I have a Macbook PRO late 2011 running OS X Mavericks.
Anyone knows why my external HD (USB disk connected to Airport extreme) does not show up in disk utility? (It sits on my desktop just fine and is fully functional) I' want to erase a partition but now i don't know how.
View 4 Replies View RelatedI've been running a Toshiba 1TB external drive on my Mac Pro tower and it's been working fine. But yesterday it wouldn't mount. I could see the drive in Disc Utility, but the partition wouldn't mount. I brought it into work where I'm running an iMac and it mounted just fine. Why would it stop working on one computer (where it was previously fine) yet work okay on another? And how do I get it working on the tower?
Info:
Mac Pro, iOS 7.1.2
I have an external 750GB hard drive that I previously formatted as FAT 32 because I wanted to be able to plug it into Windows computers as well. I was not very thoughtful at the beginning and I just created one big 750GB partition. I currently have 450GB used and about 300GB free.
I would like to create a new partition in the free space without losing the data I have in the disk, and format the new partition as Mac OS Extended to use it for Time Machine backups. Presumably Disk Utility can do it, but when I go to the "Partition" tab it says "This partition cannot be modified" and the "+" sign below it is grayed.
The hard drive is a 1TB Western Digital my book I bought it in January I think. I tried to format it to Mac OS Extended (Journaled) when I got it but for some reason every time I try to erase the part thats named disk3s2 or partition the main one it stops a little before half way through. I don't think its the hard drives fault so I called apple about it one day and they helped a little but it didn't work. Thanks in advance if you can help me. Also a few times I waited about seven hours for it while I was at school and when I came home it didn't move.
View 8 Replies View RelatedI've recently converted to the Mac-side:
I'm having difficulty with my external hard-drive, here's the info on that one:
Disk Utility won't allow me to mount the drive, I've tried using a number of softwares to read it (working under the assumption that it's an NTFS drive), including Tuxera and Paragon. I have too much stored on the hard drive to empty it back onto my old computer, and so I'm not able order to re-format it.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I have a 1/3 full external drive that is currently formatted for MAC OS External.
I want to partition the drive in half and use the 2nd partition for Windows FAT32.
However, when I try to do this with Disk Utility it does not give me the FAT32 option.
Will running the 'repair disk' disk utility on an external drive screw up any of the files on my external hard drive? I only want to run it because I can't transfer a file from my HD to the external...it's a 6 gig video file in quicktime format, and I'm getting 'error 1309', which I understand is related to file size on FAT32 format. I know it's a huge file, but I've moved others to the external that are over 20 gigs with no problems (iMovie projects, etc). Anything I can do to get this file moved to the external?
View 6 Replies View RelatedI had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
It turns out I deleted everyting without noticing.
The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
So now I have two files on my hard drive and no idea how to recover the 'delted' files.
I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
I am wondering if there is any free methods to recover these files at all
Info:
MacBook Pro (13-inch Early 2011)
I have an external 500GB Freecom USB HDD with two Data partitions on it (FAT32 and NTFS). With a Windows tool, I made the two partitions smaller in order to free up some space (ca. 200GB) for an additional Mac OS Extended (Journaled) partition. This partition I wanted to create with the Mac OSX 10.6.4 Disk Utility. When I pluged in my USB HDD in my new iMac it mounted the two partitions, NTFS and EXT32 and the Disk Utility tool also showed the free (unpartitioned, almost 200GB) space on the HDD. Then, I chose to create a new Mac OS Extended (Journaled) partition and let the tool do it. ...which I probably shouldn't have done. Disk utility stopped and showed an error message saying that it cannot read the partitions anymore and that it needs to be closed. No partitions can be mounted anymore since then on this HDD. Here is the logfile entry of Disk Utility (unfortunately, it's in German):............
View 2 Replies View RelatedCant erase hard drive because cant "unmounted disk"...My hard drive crashed about a month ago, and i used a program called data rescue to clone hard drive. when i put it in mac it will not load. now all i want to do is erase the drive and install Yosemite as new mac. but cant install or erase the hard drive.
Info:
MacBook, Mac OS X (10.7.5)
I ran installer then went to disk utility and pushed disk repair. it ran and indicated in green that no repairs were necessary. i then went to startup disk and only the Diks and network startup showed up but no hard drive. i also open computer to make sure was not wet muddy due to leak in cooling system but all was dry
View 1 Replies View RelatedI am using a macbook with an Intel Core 2 Duo (about two years old) and I am running leopard (10.5.8).
I have been using a Western Digital 250GB External Hard Drive with a firewire connection to utilize Time Machine for the past 6 months. All was going reasonably well until recently. (It would occasionally get stuck backing up and I would have to restart my computer and then backup again, but otherwise ok)
Last week I turned my computer on and it didn't recognize the drive. It gave me the "Initialize" "Ignore" option screen. I tried everything before I tried erasing it, but eventually I decided to lose all of that backed up data and just erase the drive and start from scratch. (I backed up on a different drive prior to trying this.)
Anyway, now when I go into Disk Utility and click on the Erase tab and then try to erase the drive (doesn't matter which erase option I choose) it says it is unable to erase the drive. If it is plugged in w/the Firewire cable then it gives me an "Invalid Argument" error. If it is plugged in with the USB cable, it gives me a input/output failure error.
Does anyone know if I can fix this drive? Any ideas as to what may have caused the problem in the 1st place. Months ago I accidently unplugged the drive without ejecting, but it worked for for a long time after that.
My external hard drive has been corrupted and the error message is telling me to reformat it. However, through all the research I have done to find out how, everything I've found has told me to use Disk Utility to just erase everything on the disk to do this. When I try to do this, it tells me that I can't erase anything because the disk cannot be unnmounted. What should I do?
View 4 Replies View RelatedMacbook OS X 10.5.8 and a WD 10EAVS 1TB External Hard Drive. That's all. I was given this by a fellow student on campus who was graduating. So I want to use this to store my iTunes Library (my Macbook's hard drive ran out of space). Here's what I do:
- Macbook is turned on and running
- I plug the external hard drive into a working outlet --> Hard drive turns on
- I plug the external hard drive into the mac using a USB connection --> Disk Insertion Error message: the disk you insterted was not readable by this computer
- It is not readable so I open it in Disk Utility (the hard drive is listed/recognized)
- I attempt to erase and/or partition the hard drive in order to format it in Mac OS Extended OR Mac OS Extended (Journaled), but I get one of these two messages: "Disk Erase failed with the error: File system formatter failed." OR "Disk Erase failed with the error: The underlying task reported failure on exit."
I attempted to look up what these mean or how to fix the problem but nothing is really working. I was able to format the hardware line to MS-DOS (FAT) and the sub-line as Mac OS Extended (Journaled) but I don't even know if that's right or not.Basically, I need my computer to recognize this hard drive whenever I plug it in and to run smoothly as "extra space" to store my music on.I haven't had A LOT of experience with external hard drives but enough to get things done. But this problem is a killer.
Info:
mac book, Mac OS X (10.5.6)
I am having trouble erasing DVD+RW discs. When I insert a used disc and try to erase it in Disk Utility, the process seems to complete almost immediately, ending with OS X asking me if I want to mount the inserted blank disc in Finder. However, if I eject the disc and put it back in, everything is still on there. (detail: When erasing, there is usually a short interval where a striped progress bar is shown, after which a "normal" progress bar is slowly filled as the disc is erased. However, for me only the striped progress bar is shown--the "normal" progress bar is skipped--and then OS X says erasing is done.) If instead of ejecting the disc I choose to go ahead and burn something as if Disk Utility has actually erased the disc, I get a laser power calibration error.
View 4 Replies View RelatedI tried to erase my backup files from my external hard drive. Once in the trash, I cannot delete the backup.backup file.
Info:Mac OS X (10.6.7)
I ordered a second hard drive for my powermac g5.Its a 400 gig seagate drive.I power off my machine,unhooked everything and plugged in the drive.
I boot up and the drive isnt showing in disk utility.Is it something i did?
I've got an 8GB Sony Micro Vault Pen Drive that's stopped working. When I opened up Disk Utility it appears but doesn't give me the option to erase.
Can I try doing it with anything else before I bin it and buy a new one.
I am going away traveling and need to back up all my stuff off of my mac for the first time.. (pics, music etc the usual). I brought a WD Elements 500GB External Hard Drive and when I plug it into my mac book (OSx) it appears in finder, and the desktop but I can't drag and drop nothing into it. Apparently I have to format it! So have researched about formatting it, but I don't have "Disk Utility" in my utilities? My Mac was given to me from a friend second hand so i don't have the disks etc to get it. Any other way of formatting my Hard drive or a link to download disk utilities or any alternatives!
View 5 Replies View Relatedthe past couple of days my new macbook Pro (only had it a couple of months) has been really slow to boot, with a grey progress bar that I have never seen before. I googled it, and you all know what i found.
So I ran the disk utility, and selected analyze or whatever the button is, and it said I should load it from the INstall DVD, as the disk needs repairing.
Guess what. The disk cannot be repaired.
An error message about expecting 31 files but only finding 30?
It recommends erasing the disk and reinstalling from scratch.
Now, as far as I can see, apart form the slow boot times, everything else still works. Does this mean that it is just a ticking time-bomb that will break any time, or is just a couple of corrupt files that don't matter?
This is really annoying, I love my Mac, but having to reinstall so soon after purchase?
Apologies if there any other posts on here already, it is late, I am stressed, and would like a nice person to help me out.
I have been reading that the erase feature on OS X's disk utility will not remove file slack. If I erase the entire drive using one of the security options (Zero-Out, 7-Pass, or 35-pass),
View 1 Replies View RelatedI recently installed and uninstalled a few versions of linux on my imac. After installing some versions i realized I was going to need more space, so I went back into mac OSX and have been trying to add a new disk partitions with more GB.
I replaced a 1 TB external drive partiotioned in 2 with a 3 TB extrnal drive run/store my corbon copy cloner back up and time machine.
The 3 TB drive was successfully partitioned through the disk utility and both back ups are installed and the initial back up is complete.
My question is about the 1 TB drive. I want to completely erase all data from the drive in order to use it for a different use.
Using disk utility one of the partitions deleted without incident when following the same protocol the second partition produced error messages.
Volume erase failed
Volume Erase failed with the error:
Couldn’t unmount disk.
If I try to eject the disk
It says it will not eject becaus e a program may be using it...
The only program that utilized this partition is Carbon Copy Cloner which is not being utilized on the new 3TB drive.
I do not see where there is a option to have more than on disk chosen for this purpose so am unsure why the disk utility is seeing the old partion as still in use.
