Is it possible to force the login screen instead of the locked screen when the computer goes to screen saver? I ask because the computer is used by the entire family - and by going to the login screen with all the users shown, the individual user will be more likely to login as themselves rather than just the current locked screen user.
View 2 Replies
before I went to bed, I was playing the Sims 2, when my iBook G4 crashed. Our power cord can be a bit dodgy, so sometimes that happens. I didn't really think about it much, just closed the laptop and went to sleep.Last Monday morning, I opened it and pressed the power button. It began turning on, and got as far as the grey screen with the apple and the spinning circle. And then it just froze. The circle stopped turning.
I freaked out a bit, and restarted it a bunch of times, each time with the same result. (One time it stopped spinning, and then told me a restart was required. Huh. The rest of the times the exact same thing happened though.) I even tried unplugging and removing the battery, but it made no difference. So eventually I just shut it and decided to try again later.Last Tuesday I opened it and pressed the power button without much hope, and again the apple and circle came up just fine, then stopped, but then a bunch of words and numbers popped up.I'm a complete computer noob, but they don't look good to me... or are they good?
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/REEASE_PPC
I tried uploading pictures with my s.card and then I plugged in my back up storage disk to transfer pictures and then my computer stopped working as if it was overloaded or something.... I tried forcing quit but that didn't help any. So I just shut it down in hopes that when it restarted it would work but now when it restarts the login screen comes up and after I type my password it just stays on snow leopard default screen(purple sky) and stays there.
Info:
MacBook Pro (13-inch Mid 2010)
Hi! Im new to the forums but i really need help with something and i was hoping someone here could help me out. So I just installed Tech Tool Deluxe onto my macbook and then shut it down later. I went back to use it again and when i turned it on a login screen appeared asking me to put in my password. I did that and the screen turned blue (looking like it was loading) and then went back to the login screen. Every time i put in my password it just takes me back to the login screen. I have had my mac for a while and i dont want my hardrive to get wiped out so what do i do? Thank you for looking
View 1 Replies View RelatedI was using safari and my screen locked up. Large areas got distorted and little (maybe 1/8" blocks) started flickering all over the screen. It wouldn't recognize any input from my keyboard or mouse. This really scares me for a number of reasons: I wasn't doing anything very difficult to cause the crash, The computer has basically nothing on it, and the reason I bought a mac was for its stability. I head back to school tomorrow (read: I head far away from a mac store), and I need to know if I should go by the mac store before I leave. It's a 27" i5 if that makes any difference.
View 13 Replies View Relatedi have printer windows locked on my screen. how can i get rid of them ?
Info:
MacBook Air
this has happened a few times in recent weeks. I lock the screen on my MBP (mid 2009) and go do something for a few minutes. When I come back, the computer won't come back on. I have to hold down the power button for ~10 seconds and shut the computer down hard and then power it back on. What the heck is going on here?
View 4 Replies View RelatedI have tried to install leopard on my Macbook Pro. It just takes me to the gray boot screen with the apple logo in the center and the circle status bars. It won't leave this screen. Stayed there all last night. Every time I reboot it goes here and won't advance. I can't eject the disk either.
View 4 Replies View RelatedUsing an Apple Bluetooth keyboard, when I lock my screen (using the Keychain Access dropdown menu method) and leave my computer for an extended period of time (a matter of hours), the keyboard disconnects and thus, I cannot enter my password when I return. I checked the Bluetooth set up options and while I realize this is likely due to battery life concerns for the keyboard, is there anyway to keep the keyboard connected while not in active use? Is there a screen locking method that still allows me access to the Bluetooth set up menu when locked?
Info:
Mac mini, Mac OS X (10.7.1)
From time to time my computer screen will just go blue and I don't know why. The only way I am able to see everything again is to force shutdown my computer by holding down the power button. Why is my computer doing that?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.6.8)
My macbook locked up; I forced quit all of the applications and now all I have is the gray screen. How do I get it restarted to find out what is wrong?
Info:
iDVD '08, Mac OS X (10.6.8)
I have an MBA with a busted screen (nothing but gray, though responds to ambient light changes and brightness settings). It boots and everything sounds fine, so I assume its just the screen. I brought it in to the Genius Bar, and they want to send it in under a recent previous repair (liquid damage; they had to do a brain transplant). I was still trying to get everything synced up right before I re-enabled TM with my Time Capsule, so I don't have a backup of the MBA hard drive, and I have to keep those files. And, of course, Apple cannot guarantee the safety of my data.
So... I buy an external HD and some cables and bring it into work to do a bootable HD backup. (I don't have a monitor at home; the MBA was supposed to be a desktop replacement... Yes, I know...) Anyways, I plug the monitor in and get the second screen! The mouse cursor scrolls off to the right onto the second screen and everything, so the system must be fine; it must just be the video.
Now I'm stuck. How do I enable single screen mode? Keep in mind that I'm flying blind on the first screen, so what key sequence would I use to open System Preferences etc. to enable mirroring or whatever?
No, neither I nor work have any USB keyboards so I can't just drive it with the lid closed. I don't even know if keyboard only will work, so I may need a USB splitter to get both a keyboard and mouse on anyways, and neither I nor work have a splitter.
I pressed the play button (F8) on my mac book pro yesterday. Iphoto began playing a fullscreen slideshow that I was not able to stop by any means. I hit the key for force quit and it appeared on the screen but was not able to be clicked. I pressed the power button for 5 seconds then for the first time ever on macbook pro that was so expensive.. Are there people switching back to snow leopard, which is less iPaddy?
Info:
MacBook Pro, Mac OS X (10.7.3), iPhoto
I just having problem with starting my Macboook. First, at start screen (gray background with the apple logo) appears pink/red horizontal lines over all the screen. Then, when i'm using my computer, screen goes black for no reason and i need to force restart to turn on the Mac.I can't believe this is happening to a "HIGH QUALITY" expensive computer. This seems happening to 2011 Macbook Pros... Â
Info:
MacBook Pro, OS X Mavericks (10.9.4)
Macbook Pro 15 inch
OS X 10.9.4
2.4 GHz Intel Cor i7
4 GB 1333 MHz DDR3Â
I have had my macbook pro for just over 2 years. About a week ago it started randomly giving me a blue striped, grey, or black screen. The fan pins up and won't stop and either the laptop shuts itself off or I have to force it off. When it restarts it is very slow and sometimes the fan kicks on and won't stop and the screen just stays white after the initial apple and spinning wheel screen, so I have force shut it down and try again. Other times it eventually loads and lets me in but everything responds slowly and takes some time to open.
Info:
MacBook Pro, OS X Mavericks (10.9.4)
I have a much loved ibook G4 14" (late 2004??). It has just died. Well, in so much as it won't boot up. The ibook either gets as far as the apple grey screen and hangs, gets to the login screen and hangs, actually loads up finder etc and hangs or none of the above. Sometimes flashing red, blue green black.
After lots of research online over the past few days I tried the following: I have tried safe mode (not working), starting the command prompt screen (single user and verbose modes), started open firmware, and tried booting from a CD. Nothing works as the boot gets so far then hangs. I have flashed the PRam, resetted the NVRam, and have stopped short of opening up the case to dismantle it!
I just really want to access the hard drive now. I have tried Target disk mode and linked the ibook (pressing T) via firewire to a PowerPC G5, but the G5 doesn't recognise the ibook. System profiler on the G5 shows the target mode connected and working fine via firewire, just the icon for the ibook/target doesnt mount on the G5 desktop so I cant access it.Currently the boot freezes within a couple of minutes.I tried the hardware test CD that came with the ibook years ago, I have also tried booting from an OSX Panther CD. I'm assuming they would be bootable.
I forgot to mention that in linking with the G5 in target mode, a disk that I put in the ibook drive appeared on the G5 desktop as an external drive, therefore I wonder why i cannot see the actual ibook drive mounted. The CD drive works as it mounted on the G5.Does the ibook have an actual PRam battery that can be replaced? Maybe this is an issue?Am I able to actually remove the hard-drive and access it as an external drive somehow?
I have a weird problem with my MacBook Air. I was browsing the web when I think I hit a wrong keyboard combination. I was trying to select text cmd+a. But a small white window popped up with some text. After that safari started acting weird. Whenever I tried to open a new link it did not simply open the link like usual. But it downloaded it into my download folder. I also noticed that I could only type special symbols.
So I tried to reboot my MacBook Air. Usually it boots right to the login screen. But now it first shows a startup screen where I can select a boot device. So I select macintosh HD and it boots up like normal. But I can still only type weird symbols so I cant login. First I thought maybe my alt key is stuck but it works just fine and I did not do anything with it.
Info:
MacBook Air, Mac OS X (10.6.8)
Whenever I try to boot my MacBook, it chimes and shows the apple logo & loading gear like normal, but then the screen goes blue briefly as if everything is fine (sometimes the mouse even appears) but then returns to the loading gear (without an Apple logo). This continues without end, a brief blue screen and then the loading gear again.I tried safe booting, zapping the PRAM, fsck, and the Disk Utility repair to no avail.Trying to verify or repair the permissions in Disk Utility stops with a nondescript error. When I try booting in verbose mode, it gets to the login application startup and shows 2 apparent errors:"(Error) Import: importer;0x88fe00 importer start failed for 89 (kr:268435459 (ipc/send) invalid destination port)"and something containing "(/usr/sbin/mDNSResponder) no such file or directory"For reference, this is a MacBook running OSX 10.5.4.
View 6 Replies View RelatedSomething really simple I'm sure. I've just reformatted and setup an iMac for my parents. With the existing Admin account I created another one with Admin priveleges. So my mum had one and my dad. However when I turn on the iMac it doesn't display a logi screen so that my mum or dad can select which account they want to use and enter their password. It automatically loads into the first main admin user account.
The only way to switch to the other one is to click the apple at the top left and select log off.
Question: How can I get the login screen upon startup so my parents can select their own account?
Just got a new MBP and migrated my account from my MB using Migration Assistant. Everything works, but if I try using screen sharing/Back to My Mac from ANY of my other Macs in the house to my new MBP, I cannot log in using my short name.
Can log in and screen share using my full name, but prefer three letters over many. Everything else works fine; can even file share using short name, just not screen sharing.
Just wondering if it's possible to get rid of a user on the login screen? I have a 'remote' account for other people to access my dropbox, but I never use it to login. Can I remove this user?
View 6 Replies View RelatedI finally realized that I'm not crazy and my screen -does- look dimmer than normal. I checked the "Automatically dim for this power source setting" thing and the issue is not that. At the login prompt screen, everything is nice and bright, but the screen will dim to maybe 80% of that brightness once I log into any user.
View 1 Replies View RelatedA lot of people used skype on my mac with different user names. So i would like to delete all this Skype names from the login screen. How I do that?
View 15 Replies View Relatedmy macbook boots up but the keyboard and trackpad freezes and dosnt let me sign in or anything. i know the trackpad dosnt work becasue the cursor dosnt move, and i know that the keyboard dosnt work because nothing happend when i type and when i press the caps key the indicator light does not come on!
View 2 Replies View RelatedMy Dad is having issue with his MacBook Pro. So today he shut the MacBook down, but when he switched it on again it booted fine, right through the chime and Apple logo, but when it got to the login screen it switched off. The power adaptor was connected. He has been having problems with the battery, with it not holding a charge.
View 10 Replies View RelatedI would like to know how to change background on login screen so when you turn on your mac you have the osx one i want to know if that can to changed to what ever i want?
View 4 Replies View RelatedAnyone here know how to change the login screen background wallpaper (ie. purple aurora)?
View 10 Replies View RelatedI have a MacBook Pro. When it goes to sleep it doesn't show the login window when I turn it back on. Is there an option for this?
I don't really shutdown my computer much. And anyone can use if it awakes after sleep mode.
When I turned my iMac on this morning (iMac G5 PPC 10.5.8) it went through all of the "normal" steps (gong, grey screen, apple logo, progress wheel, blue screen) and stopped at the blue screen. Thinking it was just a fluke, I shut the machine down and restarted, only to have it stop at the blue screen again.
After disconnecting everything going into the iMac except the keyboard and mouse, I attempted to boot into safe mode but it stopped at the blue screen again. I tried single user mode too but I didn't get any further than the blue screen.
Next, I flashed the PRAM (big gong, single quieter gong) and afterwards it came to the blue screen.
I reattached my external drive and selected to boot from a 2-day old backup. Using the backup I was able to log into both my regular account and my "test" account (without login items).
Have searched forums and found no direct answer for my Q which is ...
How do I change the background fill on the login screen window from solid to transparent or translucent?
Reason is cosmetic ... solid window is screen centered and blocks too much of HD wallpaper.
