I was wondering if there was any way to force the rotation of a display on a GMA950 computer? If I hold any of the modifier keys when I enter the Display preference pane, it does not give me the option, although I know for a fact that the video card can do it, as it works fine in Windows. Does anyone know of a 3rd party app that might do this?
View 2 Replies
I got iPhoto 09 today, but had the same problem anyway in 08. Most of my pictures are of my pre-Mac days and all of the ones which were taken turning the camera i.o. vertically, are not automatically rotated by iphoto. I'm quite sure other software does that.
Doesn't iPhoto have the ability to determine whether a photo is supposed to be rotated or not? If not, is there any free software out there?
I read the thread about how to pivot your screen over in another section but it didn't address what to do when it goes wrong. And it did...very wrong. I'm running a Powerbook G4 Titanium 15" laptop with Tiger OsX 10.4.11 and I hooked an external monitor to it. I was playing around with the settings and saw the rotation feature, which wasn't available until I attached the external monitor. As soon as I clicked on 90 degrees, both the main screen and the external fritzed out. I could vaguely see things through the haze on the main screen but the whole thing had stopped responding to all mouse and keypad commands. Eventually the only thing I could do to regain control was a hard shut off with the power button and unplug the external. After that the main screen booted up just fine but the moment I hook up the external again they go blue screen of death on me and I can't see what I'm doing to undo what I did!! I tried hitting the manual reset on the screen itself, which I didn't really think would work but hey, desperate times...
After some research on the internet I found out that, contrary to what the other thread says, not all Tiger enabled computers can run the rotation function, apparently because the scan rate, or something like that is too low. Which is why the option was disabled when only the main screen was running. Nice to know and would have been good to know sooner but what I need help with now is HOW DO I FIX THIS MESS?!!!! Some sites mentioned archiving (I'm moderately computer savvy but I'm not totally sure I know how to do that) and some have mentioned the boot disk, which I have but I want to make sure I know what will happen if I do that. I've backed up my files just in case. Will it erase the programs I've installed or just my settings? Or is it much simpler and is there something in the utilities I can mess with that will reset stuff?
I put a DVD in my DVD drive and it has been ejected but the disk hasn't come out. I've restarted the computer, tried to put another disk in, etc. Is there any key combo or anything to force eject.
View 7 Replies View RelatedI am about to buy a new 24" iMac. I currently have a Dell 2408WFP 1920*1200 display which I would like to use as a second display for the iMac.
Which Mini Dislpayport to DVI adapter do I need? Single-Link or Dual-Link?
I just tried to rotate a picture a friend sent me, and it rotates. but when i save it and quit out of preview and then open it in preview again it's not rotated! I even tried "Save As..." and tried saving it as a TIFF instead of a JPG.
BUT if i take a screenshot and try to rotate that preview saves the rotation just fine! So what's going on??
I'm running the latest version of Tiger on my Powerbook G4
I'm looking to buy the ultrasharp U2311H, I've seen that you can rotate the screen 90 degrees (would be perfect for coding/reading). How does this feature of the display work with the mac? If I physically rotate the screen would the mac recognize the new position or how do you configure it for it to display everything the correct way?
View 6 Replies View RelatedI have attached an audio file behaviour to an object. I want the audio to trigger rotation in both directions. When I select 'add' in 'apply mode', I get plus values for rotation along with amplitude. When I select 'subtract', I get negative values for rotation. But when I select 'add and subtract', I only get positive values. So, for example, for the Y axis, I can have rotation to the left, or rotation to the right, but not both.
View 2 Replies View RelatedApple revealed a minor tweak to the iPad hardware when preorders began Friday morning, with a button previously designated for audio muting changed to a "screen rotation lock." As first noticed by Jim Dalrymple at The Loop, the switch, located just above the volume controls on the right side of the device, is now devoted to locking the screen orientation in its current state. Previously, the switch was used to mute the iPad. One of the features Apple has touted with the iPad is that it can be used from any orientation the user sees fit. The new feature will prevent users from having the screen rotate unexpectedly as they use the device while browsing the Web, reading an e-book, or accomplishing any other task on the 9.7-inch screen. "There isn't even a single orientation," Jony Ive, senior vice president of design with Apple, said in the iPad's initial promotional video. "There's no up, there's no down, there's no right or wrong way of holding it. I don't have to change myself to fit the product. It fits me."
Like with the iPhone and iPod touch, the internal accelerometer of the iPad automatically adjusts the display to fit the orientation by which the user is holding the device. The iPad allows even more functionality than with the previous products, granting users the ability to turn the iPad completely upside down, with the home button up top, if they so choose. Because the iPad has a focus on reading e-books and newspapers, many users will undoubtedly use the device as they would a physical book or newspaper -- objects that are sometimes read by users laying on their side. The screen rotation lock would prevent the device from shifting as a user moves around. Additional physical inputs on the device are the on/off and sleep/wake button, volume up/down controls, and the home button. Apple began accepting preorders for the iPad Friday morning. Purchases for the device, scheduled to ship April 3 for the WiFi-only model, are limited to two per customer. [View this article at AppleInsider.com]
As the title states. I am looking for an external display that matches the display on my black MacBook. I want one with the same gloss finish as my MacBook, this way I can calibrate both screens to look the same. That way when I switch screens it doesn't look different.
Anyone know of a screen that looks identical to the (previous generation) MacBook? I was thinking of getting a Samsung T240 but it has a different finish. How are ASUS screens? Any screens out there that have the same gloss finish?
My Time Machine drive is a USB hard disk, and when I plug it in, I am unable to get it to eject (even if the Time Machine preferences show that I am NOT backing the disk up). When I unplug it, I get the warning message about not unplugging drives before ejecting. Is is there a way for me to "force eject" or force anything accessing my time machine volume to shut down, so that I can properly eject it?
View 5 Replies View Relatedi tried to use some software to test the display. I found when the screen goes to completely dark with the backlight on, the bottom side of my screen is brighter than other parts....
have u guys met any problem like that, or is this some problem with my MBA?
I am about to buy a Mac Mini and want to find out how it works with using a 1080p (Pioneer Kuro) TV as a monitor
How does it look on the TV i.e. especifically what's the quality like?
I am sure many people have done this, I am probably going to be using a digital cable (ToSlink) for the sound and a Mini DV to HDMI cable for the video
under system preferences> display> color, what display profile do you use, adobe RGB, apple RGB, PAL/SECAM?
View 3 Replies View RelatedI have been running my macbook pro open, with a single monitor running beside it. I have come to the conclusion that I would benefit from two large monitors while working at home.
I know I need to buy the dualhead2go DP edition, but what Im not sure about is the cables I need to hook up to my monitors. I haven't yet decided what two monitors I am going to hook up to it, although they will be exactly the same and have HDMI connections.
What I am planning on doing is Getting the Dual Head 2 go, along with 2 DisplayPort to HDMI converters, and 2 HDMI cables, Correct me if Im wrong, but this should work?
Also, If anyone is currently using a dual head to go, how is the performance? I wont be doing any gaming, so that is not an issue, but for day to day tasks I assume everything will run fine? Im running the 330 in my 15' MBP.
I'm thinking of hooking up a second monitor along with my Macbook for home use, probably just an older CRT. What kind of adapters do I need to do this?
View 3 Replies View RelatedI'm going to University next September (hopefully), and I want to be able to play my PS3 on my Macbook display (instead of taking my massive TV).
And I'd also like to be able to connect my freeview box which is a RCA/Scart connection. My PS3 is also RCA/Scart.
Any chance of a Target Display Mode as seen in the new iMac for the MBP? Is this a hardware or software thing?
View 7 Replies View Relatedi have a 13" mbp (w/ a mini display port) and i want to hook it up my w/ flat screen.
why is it sooo hard to find a mini display to hdmi adapter/converter/cable ?
I have a 2009 mac mini with dual display. One mini display port and one mini dvi port. I would like to buy two of the recently discontinued 24 inch led display. I know I can connect one monitor via the mini display port.......my question is how would I connect the second display?
Is there a mini dvi to "mini display" adapter?
Just bought 24" apple cinema display and did not realize that the video was different from my G5 dual 1.8 Powermac. I have a DVI-A connector in the Powermac G5. Is there a DVI-A to MDP adapter that will allow me to use my Power Mac to run my new display?
View 1 Replies View RelatedI'm wondering if it's possible to play my Xbox on my MacBook display instead of on the terrible standard definition 13" TV I have at school.
Would it be possible to find a component to mini-display adapter?
Today I bought iMac 27-inch. Firstly I planned to buy 21.5 inch, but when I saw this 27-inch I decided to buy it. I've got Core 2 Duo version.
So, I wanna to connect my 360 to this iMac. I have Mini Display -> DVI adapter and than DVI -> HDMI adapter and the problem could be sound. DVI does not transmit any sound. So is there option to play sound from 360 on my iMac or via headphones? What if I connect stereo cables (into mini jack using adapter).
I am on my new 27" iMac last night when all of a sudden the display froze and pix-elated for a second and then went black and a few seconds turned back on with an error message at the bottom right screen saying my display adapter had stopped . . . . .
I was in Windows 7 64bit Professional at the time. I also noticed that Apple is wanting download a newer version of Boot Camp which I will download tonight!
I went to the ATI website and found a new driver dated 4-2010 and downloaded it. All seems well but was wondering if anyone has had the same issue?
I have recently bought a 2008 Mac Pro (8 Core) and have pimped it up with RAM, Vertex SSD and a few 2TB hard drives, on top of that I have pulled the trigger on a Apple LED display however require a graphics card that is compatible for the Apple LED Displays with Mini DisplayPort.
View 6 Replies View Relatedis there an adapter for an old Cinema Display to hook up to at PowerPC G4
View 2 Replies View RelatedI have a macbook and I want to get a cinema display but I heard that the cinema displays from apple do not work with any other computer.
Does anyone know where I can get an adapter to have the display work with non-macbooks?
Also I posted this question on Apple Forums and they removed it with no answer because it can lead to rumours about new product releases so I am seeing if anyone here has an answer.
I've got a Santa Rosa (mid 2007) Macbook Pro.
Where can I get the specifications of my display?
I might be purchasing a 30 inch cinema display and currently have a mid-2009 unibody MBP. I know I need the cable to power it, but do I need to drop the 100 dollars for the apple one or are their any alternatives?
View 4 Replies View RelatedI just wanted to ask how i can get this white macbook to run (if it can this cinema display)
Its the 4.1 White macbook, and the cinema display i had with my G5 which i bought in 2005. THe display has the old connectors (see MM photo Album below)
[URL]
Is it possible for me to get the macbook to run this? If so, how? (i can head to apple store today to pick up parts! Wife needs the largerr real estate to sort out her portfolio as i have put of buying a MacPro for a few months (just finished travelling for 3 years
