I might be purchasing a 30 inch cinema display and currently have a mid-2009 unibody MBP. I know I need the cable to power it, but do I need to drop the 100 dollars for the apple one or are their any alternatives?
View 4 Replies
I have a new MacBook Pro with Miniport connected to a Cinema 30 using the Mini DisplayPort to Dual-Link DVI Adapter. I upgraded from the previous version of the Macbook Pro w/built-in DVI and never had a problem.
From the moment I started using this new miniport adapter with the Cinema 30, I noticed intermittent graphic anomalies. Most of the time, discolored lines will start rapidly popping in and out across the screen - especially noticeable with dark backgrounds. Here are a couple of quick videos that visualize the problem.
6 weeks ago I bought a Mac Pro Dual Quad 2,66 with an ATI HD 4870 graphic adapter. System is OS X 10.5.7. I try to get an Eizo 30" display (SX 3031W) working with this configuration. Using the signal connector #1 on the Eizo , the display will show up to 2560x1600 resolution (as it should be) but after selecting this option will fall back to 1600x1200 pixel. I tried installing on the DVI plug of the card and also on the minidisplay-port using the "Mini Displayport to Dual Link DVI adapter" from Apple but up to now it does not work.
View 1 Replies View RelatedI just got a displayport to dual-link dvi adapter for my 2011 mac mini. Using a HP LP3065 display, and it keeps flickering! Is there something I can do to make it stop? Does the adapter have firmware that can be updated?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.3)
Has anyone tried hooking up a two 30 ACD's to a 4870 on their MP.. just want to check if there are ANY issues with this setup.
[URL]
is there an adapter for an old Cinema Display to hook up to at PowerPC G4
View 2 Replies View RelatedI have a macbook and I want to get a cinema display but I heard that the cinema displays from apple do not work with any other computer.
Does anyone know where I can get an adapter to have the display work with non-macbooks?
Also I posted this question on Apple Forums and they removed it with no answer because it can lead to rumours about new product releases so I am seeing if anyone here has an answer.
I bought & returned one...but I was curious if anyone had any new experiences with the displayport to dual link dvi adapter. I'd like to pick one up again -
View 4 Replies View RelatedWhen I connect a display via a Dual-Link adapter (tested original Apple and Dr.Bott) to the external Mini-Displayport of my Macbook Pro 17" 2009 I don't get full 8 bit per channel color depth (or at least it's seriously messed up with heavy banding), neither in native resolution (2560x1600) nor in non-native (1920x1200).Running the same display via the same cable over a passive Single-Link adapter works perfectly well (all 256 shades of grey present).
I tried two different cables (both a Dual-Link and a Single-Link cable, both of which work with the Single-Link adapter). So either both Adapters are bugged the very same, or the 9600M GT does something wrong when a Dual-Link adapter is connected. It could also be a driver issue, but at least the internal display doesn't show any banding when running in Clone mode.Same happens on OS X with both the 9600M and 9400M. So either both adapters ain't working properly or there's something wrong with the combination of NVidia 9x00M and Dual-Link DVI.
And I tested three more single-link displays (1x 1920x1200, 2x 1680x1050) and only one works (the 1920x1200 Viewsonic VP2330), the other two show the same problem with both Mini-Displayport to Dual-Link DVI adapters.Then I tested connecting a current ATI based IMac 21.5" to one of the not working displays (a Samsung) and there worked with both adapters.So it seems that the 9400/9600M in the Macbook Pro output a signal of lower strength (compared to the ATI based Imac), which leads to signal degradation once coupled with a Dual-Link adapter. The reason why the VP2330 works probably is because it can work with weaker signals. That doesn't help me at all with my 30" display though and only 1 working display out of 4 is rather disappointing.
Not sure if there is anything newer firmware than 1.02 but I need ~something~ to drive my new minty Eizo 30" on my unibody MBP
View 11 Replies View RelatedI have two notebooks with mini display port and I have this 30" LCD screen.Apple says I need their $99 dual link DVI adapter. Legit or is there something cheaper?[URL]
View 2 Replies View RelatedLong time reader and my first post. Apologies in advance if there's a real basic answer, but I've tried Google and searching this forum too but couldn't find a specific answer. Basically, I'm planning to upgrade to a 30" monitor eventually. I currently have a Samsung 226BW and I use the MiniDisplayPort -> DVI adapter.
I was wondering whether if I purchase the MiniDisplayPort --> Dual-Link DVI adapter ($99), can I still use it to connect to my 22" Samsung? I'm thinking of giving my cousin my current Mini-DisplayPort -> DVI adapter, buying the Dual link adapter and then eventually swapping out the 22" for a 30".
Where can I obtain a new 23 Inch Cinema Display power adapter? I've searched the Apple Store but I cannot find it.
Information:
G5 Dual Core PowerPC
Mac OS X (10.5.1)
23 Inch Cinema Display
I have a 8x2.93 with 2 x 30" apple displays & the ati 4870.I have the displayport to dual-link dvi adapter to use both monitors.The monitor connected to the dvi port on the card is fine.The monitor connected via the adapter occasionally 'flickers' or kinda turns on/off very quickly.It's very intermittent. Often will go hours without doing it, but regularly does it 3-5 times a day.
I've tried swapping monitors around, and the problem follows the adapter.I've also got a 2nd adapter here spare (that I sometimes use for my laptop) that I swapped in as a test and the same happens.Smells to me like a firmware bug.I rang apple and amusingly they told me to run the vga firmware update. I told them it was not vga and they told me I still needed to run it. When I ran it of course the updating program said "no vga displays connected". Real smart advice there. They are looking into it and said they might be 5 days.
With a minidisplayport to dual link dvi adapter and a dual link dvi splitter, shouldn't I be able to connect to monitors to one of the new macbook pros?
View 1 Replies View RelatedI have a couple end users who have the newer MBP's with 30" monitors using the Mini DisplayPort to Dual-Link DVI Adapter. A number of them are experiencing issues with small, roughly 1" long by 1 pixel high, horizontal lines that flash intermittently. Has anyone else experienced this? Know of a solution?
View 3 Replies View RelatedI just got my crazy new DisplayPort to Dual-Link DVI adapter in the mail today, 2 months late. I must be one of the first.It's a pretty crazy adapter. 5 feet long with a sizable box on the end, requiring power via a vestigial USB connector. It works fine visually on my 30 inch Cinema HD display, but now my mouse cursor is jumpy. Every few seconds as I drag my mouse, the cursor jumps 5-10 inches, making it hard and frustrating to use.
View 4 Replies View RelatedAre there still flicker issues
View 4 Replies View RelatedIs there an adapter that will connect an Apple cinema display to a Thunderbolt port?
View 2 Replies View Relatedwhat is the difference between the dvi and dvi-d input for a display?
i want to get one of the silver apple 23inch cinema displays for a macbook pro that has the newer mini-display jack. i just want to make sure that i get the correct adapter. apple's store has a mini-display to dvi adapter... would this work? does the cinema display have a dvi or dvi-d connection?
also, with this adapter, do the usb ports on the back of the display function? or are they connected via a usb cable to the mbp?
Anyone have good luck with a gig-e->USB adapter? I'm planning to get a MBA and cinema display, but I need the use of gigabit ethernet. Will it work well if I plug it into the USB hub on the display and will I be able to max out the USB connection?
View 8 Replies View RelatedI'm going to University next September (hopefully), and I want to be able to play my PS3 on my Macbook display (instead of taking my massive TV).
And I'd also like to be able to connect my freeview box which is a RCA/Scart connection. My PS3 is also RCA/Scart.
I am about to buy a new 24" iMac. I currently have a Dell 2408WFP 1920*1200 display which I would like to use as a second display for the iMac.
Which Mini Dislpayport to DVI adapter do I need? Single-Link or Dual-Link?
I just wanted to ask how i can get this white macbook to run (if it can this cinema display)
Its the 4.1 White macbook, and the cinema display i had with my G5 which i bought in 2005. THe display has the old connectors (see MM photo Album below)
[URL]
Is it possible for me to get the macbook to run this? If so, how? (i can head to apple store today to pick up parts! Wife needs the largerr real estate to sort out her portfolio as i have put of buying a MacPro for a few months (just finished travelling for 3 years
I'm a PC guy (unfortunately), and I wanted to get my wife (graphic designer) a Mac present for our 3 year wedding anniversary (maybe a bad choice). As a cheep axx i looked on eBay for best deals... and happen to stumble upon an old G4 (Gigabit Ethernet) Dual 500MHz tower. I understand that is a old model, but the budget constrains gave me a no better choice... $300-400. For the first Apple it is a start.To make it up i got her a 23" Cinema Display.My dilemma as you see is the old vs new technology. I have not yet received the merchandise, but as i read I'm up for a surprise.
1. Do i need a power adapter for the display?
2. Do i need a ADC converter (or something like it)?
3. What (cheep) Graphic card will be a plausible fit to avoid conversions?
4. Will that card work with my motherboard (if there is one inside lol)
So far browsing i got:
Recomendations
RADEON 9800 Series
Requirements: Power Mac G4 or G5 with NVIDIA graphics card or ATI Radeon 7500 or better graphics card Limitations: The Power Mac G4 Cube computer must have a Nvidia Geforce 2MX graphics card to be compatible with the Apple Cinema Display HD or Apple Cinema Display (20-inch). he Power Mac G4 - (Gigabit Ethernet) video card does not support the Apple Cinema Display HD or Apple Cinema Display (20-inch) unless the original video card is updated to one that meets the specification for the display.
I have been running my macbook pro open, with a single monitor running beside it. I have come to the conclusion that I would benefit from two large monitors while working at home.
I know I need to buy the dualhead2go DP edition, but what Im not sure about is the cables I need to hook up to my monitors. I haven't yet decided what two monitors I am going to hook up to it, although they will be exactly the same and have HDMI connections.
What I am planning on doing is Getting the Dual Head 2 go, along with 2 DisplayPort to HDMI converters, and 2 HDMI cables, Correct me if Im wrong, but this should work?
Also, If anyone is currently using a dual head to go, how is the performance? I wont be doing any gaming, so that is not an issue, but for day to day tasks I assume everything will run fine? Im running the 330 in my 15' MBP.
I'm thinking of hooking up a second monitor along with my Macbook for home use, probably just an older CRT. What kind of adapters do I need to do this?
View 3 Replies View RelatedI have a 2009 mac mini with dual display. One mini display port and one mini dvi port. I would like to buy two of the recently discontinued 24 inch led display. I know I can connect one monitor via the mini display port.......my question is how would I connect the second display?
Is there a mini dvi to "mini display" adapter?
I am on my new 27" iMac last night when all of a sudden the display froze and pix-elated for a second and then went black and a few seconds turned back on with an error message at the bottom right screen saying my display adapter had stopped . . . . .
I was in Windows 7 64bit Professional at the time. I also noticed that Apple is wanting download a newer version of Boot Camp which I will download tonight!
I went to the ATI website and found a new driver dated 4-2010 and downloaded it. All seems well but was wondering if anyone has had the same issue?
Im looking to buy on of these adapters from apple and I'm not sure which to purchase. I know the single link adapter would be good for the 24in monitor ill be hooking it up to about half the time, but the other half of the time ill have it hooked up to either a 40in or 52in HDTV. Will the single link be able to handle this or will I need,or am I at least better off with the dual link adapter? On a side not, what does the dual link actually offer over the single link, and what is the usb adapter on it for?
View 10 Replies View Related
