OS X :: External HD Not Mounted Properly - All Files Gone
May 12, 2009
I was writing files to an external hard drive that was NTFS using NTFS-3G by MacFuse. However, I closed the macbook lid and it went to sleep and I unplugged the drive. Then, when I opened it back up again, it said it wasn't unmounted properly and now all my files are gone on the drive! However, there are only 58 gigs worth of files showing on the drive, but it says there are 132 GB used. So I am guessing the files are still on it, just not showing up. Is there a way for me to see these or access them. It is very valuable files!
View 2 Replies
ADVERTISEMENT
Dec 8, 2010
I have an MBP running OS X 10.6.5 and I have a 500GB external HDD with 2 partitions (NTFS & FAT32), which I mounted to my MBP using FSTAB. Some of the files in the NTFS partitions are greyed-out, and i can't copy/open them on my MBP.
1. Copying the file returns this error:
"one or more items in {file} can't be changed because they are in use"
2. double-clicking the file does nothing
3. Right-click > Open With, returns this error
"Item {file} is used by mac os x and can't be opened"
I've used Terminal to move the file to FAT 32 drive and my MBP Desktop, but steps #1, #2, #3 still don't work. I realized the files that are greyed out are those that I copied from my MBP to the NTFS drive. Existing files in the drive can be opened.
View 2 Replies
View Related
Dec 20, 2009
need to figure out formatting...will post again.
View 6 Replies
View Related
Mar 14, 2009
I'm having trouble backing up with Time Machine. Here's the setup:
1. Three, 1TB external hard drives in a concatenated software RAID. This means that they are treated as one large drive. There is no mirroring, no increased data rate, blah blah blah. It's just three hard drives in the place of one. I am aware that this means my backup is three times as likely to fail with the hardware, but that's OK.
2. These three are connected to a USB hub.
3. This hub is connected to a G5 tower. The G5 tower can back up to the concatenated drives (I'll call them just a RAID from here on), and also all additional external hard drives that I connect to the G5 tower have been backing up to the RAID no problem. This is great.
Here's the problem:
I'm trying to get two more computers to back up to the RAID wirelessly. I read a lot online about how this didn't used to be a supported feature (backing up to an external hard drive over a network with time machine), but that Apple has recently upgraded Time Machine to support this functionality.
The first computer I started with to try to backup over the network was a Macbook Pro, trying to get it to backup to this RAID. It can see the RAID over the network, mount it, copy files to it/read it, but CANNOT time machine backup to it. I select the network RAID as the backup device, hit "back up now," then get this message:
"The external volume cannot be mounted."
This is really bizzare, considering that it is mounted, and that I can copy to it. Just for your information, I have an airport extreme wireless network that has been working beautifully, no Keychain access issues, no 3rd party firewall, nothing. I've run through Applecare on this issue: the MacBook Pro has never done ANY time machine backup on the RAID, not even a partial one, so there's no dangling sparse bundle or backup folder or anything like that. All network permissions check out, etc. I've tried repairing the RAID with disk utility, as well as repairing permissions (although I have not done either of these things to the MacBookPro).
The latest thing I tried was plugging the RAID directly into the Macbook Pro. Here's where I got the first clue (at least I think so)...Plugged DIRECTLY into the MacBook Pro, the RAID will mount, but the MacBook Pro WILL NOT backup to the RAID. It gives me the same message: the selected volume cannot be mounted. Again, this is strange considering that, just like when I am viewing the RAID over the network, plugged directly into the MacBook Pro the RAID will mount, I can read it, copy files to it, etc.
I have considered plugging the RAID into the Airport extreme directly, but first of all this would mean much slower transfer speeds with the G5 tower, which is a big issue considering the files I am backing up every day, and two, since it seems that the RAID won't be recognized by the MacBook Pro even when plugged in directly, I'm thinking that this is a more fundamental issue.
View 7 Replies
View Related
Jun 9, 2008
I have a Macbook (blackbook) running OS X 10.5.3 and a 160GB Firelite HD that connects via USB. It use to show up and run just find but lately it hasn't been showing up on the desktop or in Finder. However, it shows up in Disk Utility, which shows that nothing is wrong with it. How do I get it to show back up on the desktop/finder?
View 2 Replies
View Related
Feb 9, 2010
I've had a 500GB WD My Passport for about 2 months now. It was working perfectly, until last week when it didn't want to connect properly (i.e. I would connect it 10 times, and about 6 of the times it would work). Now, it doesn't seem to connect at all. I can feel the HDD vibrating inside, so it is getting power, but it's not showing at all. What's very weird is that it doesn't even show on Disk Utility. I'm completely lost as to what I should do. I need to either get it to work again or reformat it somehow, because I'm going on a trip next week and need the space on it.
View 9 Replies
View Related
Jul 1, 2010
I just experienced a strange thing while clicking on links for .ics calendar files on two different macs. On one machine it works as it should, i.e., you click on the link and a popup window asks if you want to save the file. If yes, it will then open the file in Entourage. Great. On my other mac I click on the same link and it just opens the file in its raw form, almost like viewing the source code of a web page. Does anyone know why this is so? How can I get the file to open properly on this machine?
View 1 Replies
View Related
Dec 10, 2008
My external hard drives simply refuses to eject/un-mount, and I've done everything I can think of to terminate any processes and/or applications that may be using the drive and preventing it from being ejected properly, but I haven't had any success. Is there some Mac-Jedi way of going about isolating what might be preventing this drive from ejecting properly? I've scoured the activity monitor but can't figure out what might be preventing the drive from ejecting?
View 6 Replies
View Related
Apr 4, 2012
It no longer shows up in the list like the other one in the double enclosure does. I can see it with DU but cannot verify or repair b/c choices are grayed out. Smart says it is read only. How do I get data off of it, as it seems to be on its last leg?
Info:iMac, Mac OS X (10.6.6), 2.4 late 2008
View 4 Replies
View Related
Jan 17, 2010
Recently I installed the Snow Leopard OS on my Macbook Pro, previously I had 10.5 installed. However, now when I connect my Macbook to my flatscreen TV (Panasonic Plasma), using a mini display port cable to an HDMI cable, there's a black border around the edges of the picture. Before the Snow Leopard upgrade I was able to view the entire screen area of the Plasma TV, without any borders. The only thing I've done differently since then is install Snow Leopard. Does anyone know how I can fill the screen with image without using the zoom option on the TV screen, as the zoom cuts off some image at the top and bottom?
View 3 Replies
View Related
Mar 14, 2012
If I connect a external monitor and keyboard to my late 2011 Macbook Pro (running Lion) it starts up just fine. But if I try to start it up without these (or any other devices) attached, I get no display on the internal screen and the internal keyboard is ignored (the caps lock light doesn't light up when the key is pressed). However, I don't think it's a hardware issue, as a PRAM reset seems to work (I get the second chime) indicating that the keyboard is OK. And I get a second or so of grey screen before the screen goes black. I've tried resetting my SMC and my PRAM. The latter seemed to fix the problem once - but then it came back, and won't go away again this time. I've also tried starting in safe, single user, and verbose mode, but none of these seem to make any difference. I've been having some issues installing Windows (under both BootCamp and Parallels) but wouldn't have thought that these were related.
Info:
MacBook Pro, Mac OS X (10.7.3), 2.5 GHz i7 4GB 750GB 7200RPM Matte
View 4 Replies
View Related
Apr 26, 2010
I used to have a mac Mini that connected so effortlessly to the monitor and allowed the full resolution (1920x1080). But I'm trying to do that with my MacBook (as I recently sold my Mini) and I'm unable to get it to do what I want to. I have Snow Leopard. It would not allow me to do anything until I updated the OS. The monitor was not recognized at all. Except I noticed when I plugged it in, the macbook screen would flash...so I figure it's recognizing something. But in display settings, detect display wouldn't show anything, neither would restarting. That is, until I updated Snow Leopard.... Anyone know why this might be? And now that I've been able to get something on the display, I'm still not at all satisfied. The resolution is terrible. It will not allow me to choose anything other than the resolution on my macbook screen, but over 23" it just looks terrible. Not only that, but the Macbook screen stays on. I want the mb screen to go off, and full resolution be on the external monitor. I can choose another option for an extended desktop but that's just ridiculous. I have no desire for anything like that.
View 5 Replies
View Related
Jun 25, 2012
Have a brand new MBP 13" using Thunderbolt-DVI adapter with my old Dell 2405 LCD. Have an interesting scenario ... when the display goes to "sleep" there is still some type of signal coming out of the display port. The monitor will stay on and just blink "NO SIGNAL DETECTED ON INPUT 2". But the monitor actually still stays on.When I put the entire laptop to sleep them the monitor will properly power down to sleep mode.
I don't think its the monitor because I've used this monitor with a number of different machines and graphics cards, in every scenario when I had the display set to sleep it powered off just fine.
View 4 Replies
View Related
Jun 23, 2014
i have Macbook Pro 2011 8GB RAM, 1 TB Hard drive OSX Mavrick. i recently ejected my back up drive but it was not a properly ejected now when i plug in the computer it doesnt come up as hard drive. it shows up in the disk utlity but it doesnt open its my backup drive and i dont want to loose m data
View 2 Replies
View Related
May 6, 2009
I would like to ask about retrieving some lost files (photographs) on my computer/camera. On Sunday evening, I was uploading photos from my Sony DSC-T10 camera onto my Mac OSX v.10.3.9 Powerbook. While I was deleting some of the files I had uploaded, the camera battery died and was not properly ejected from my computer. After I re-charged the batteries, I connected my camera to my computer again and the computer could not detect any files/photos in my camera. I had approximately 512 photos on the camera that have disappeared.
Note that when I connect my camera to my computer, the files I had been deleting just before the camera battery died shows in my Trash folder. However, when my camera is not connected to my computer, the files do not appear in my Trash folder. I went to Applications > Disk Utility to attempt to find my lost files and the following information appears at the bottom of the screen:
Format: MS-DOS File System
Permissions Enabled: No
Folders: 0
Capacity: 949.8 MB
Available: 775.5 <B
Used: 174.3 MB
Number of Files: 512
View 6 Replies
View Related
Feb 21, 2009
Recently I've had this problem where-by i can't right-click on a mounted disk and select eject from the contextual menu. When I attempt to right-click, the Finder 'refreshes' itself and I don't get a contextual menu at-all.
View 1 Replies
View Related
Jul 15, 2009
I have Seagate FreeAgent Go 250 GB USB Harddrive. I don't know why but I cannot access my drive. When i plug usb cable, nothing appears on desktop. Only Disk utility can see Drive. but it seems in grey font. when i click mount, it gives error that says repair disk. But when i start repair disk, nothing is happening. Progress bar is not moving. Just preparing bar like this
[URL]
View 2 Replies
View Related
Jun 3, 2010
First, safari froze (spinning beach ball). I only had 2 tabs open (cnn and facebook) and Mail. Not much going on, it has never froze like that so I let it sit for about 10 minutes. It was still spinning when I came back so I did a hard shut down (held power button). I tried to turn it back on about a minute later but it wouldn't go past the grey screen...and then the lovely folder/question mark came up. Joy oh joy.
So I booted from the install disk and it said my hdd was not mounted. I ran disk utility and it gave me these errors:
-Invalid node structure
-Volume needs to be repaired
-Error: The underlying task reported failure on exit
View 4 Replies
View Related
Apr 18, 2012
In order that my tele provider remotly can take control over my computer they send me a program (_yousee QS8c.dmg ) via internet.When I open it I get the message that the program fails to open. I can get the attached information which automatic will be sent to Apple.I never gat any answers and I far from being a superuser so I am lost.
View 1 Replies
View Related
Sep 23, 2009
I have a couple of Windows systems on my home network, and it gets a bit confusing when I've got 2 mounted volumes on my desktop both called "Users", as it's not possible to see which one relates to which PC.
Is it possible to use a custom icon for a particular volume so I can visually differentiate between the two? If so, how do I do it?
And no, changing the name of the Windows share is not an option!
View 6 Replies
View Related
May 20, 2012
I'm now running 10.6.8 on a MacBook Pro and last night when I plugged in my external hard drive or a dongle, it didn't come up on the desktop. I tried both USB ports and different dongles - nothing. Yet every time I unplugged I got the warning message that unplugging a disc without ejecting via the Finder could lose files on the disc. The Disc Utility can see the USBs and I've tried repairing and verifying the disc it sees - nothing. I've restarted and shut down on separate occasions and on another re-set SMC by removing the battery - nothing. So basically, it's 'seeing' the USB but not putting it on the desktop graphically so I can't see any files on the USB or save anything to it.
I only updated to 10.6.8 a couple of weeks ago and though I haven't had any issue like this till last night, I can't think of anything else that has changed with my set-up.
Info:Mac OS X (10.6.8)
View 8 Replies
View Related
Sep 25, 2010
i'm trying to run Red alert on my mac using wine (just discovered the're giving it away for free ).
Problem is I've managed to install wine, download red alert but need to navigate to the iso to run the install program for red alert. This might be very basic but I don't know what directory to go to in terminal to get to a mounted iso...
View 6 Replies
View Related
Jan 16, 2009
I have an external drive mounted via firewire and formatted with HFS.
I would like this drive to be accessible by an administrator, say admin, only and have used Finder to set permissions. So the user and group for the /Volume/<drive> is admin:admin.
I have created a standard user, say user. However I find that when the standard user logs in he can access the volume and the rights for the drive become user:user instead of admin:admin, so that drive is accessible by any login user no matter what permissions I set as an administrator.
View 4 Replies
View Related
Jan 22, 2009
Is there any way to make a shortcut to the desktop of a mounted network drive? like when you map a drive in windows XP but its in "My computer" instead of the desktop?
View 3 Replies
View Related
Mar 30, 2009
I am using an external hard drive with Airport Extreme for Time Machine. Should I be worried about my data in an event of power loss because the drive is always mounted? Has anyone loss a drive due to power loss and what have you done to fix it or prevent it? What are you using as backup power and why? I know I can go with Drobo, but are there other lower cost options?
View 6 Replies
View Related
Apr 13, 2009
On my MacBook Pro I have set up a bunch of shares to mount upon login. They then are presented by icons on the desktop, all using server "afp://BMK-rnp (AFP)._afpovertco._tcp.local/SHARE NAME". The shares are hosted on my Infrant/NetGear ReadyNAS Pro, which uses the AFP protocol, and advertises the AFP service over Bonjour. However, when I have had the MBP sleeping for a few hours, not just a few minutes, and I open it back up, it has lost the connection to the shares. I get a message that the server is unavailable, and that the shares are disconnected. I can't do anything about it, except disconnect the shares in the pop-up, open up finder, and click on the "BMK-rnp (AFP)" icon under shared, and then reconnect to the shares. Is there a way, using std. OSX tools, to "re-connect" to the shares? I have tried a small utility - "Bounjour Mounter" - but I never got it working right.
View 6 Replies
View Related
Jun 29, 2009
I just noticed this strange thing a couple of weeks ago and just found the cause. Note I'm running a Mac Pro w/4 drives, 1 of which is dedicated Time Machine drive. Usually the system is dead quiet (disk activity as well) except when I am actually doing something or time machine is backing up. I have also noted what spotlight 'sounds' like when it's doing a background index. This 'heartbeat' is a click, click, thump, thump (I just used those terms to describe two distinct sounds, referring to disk access/seeking). It will do this forever every 2-3 seconds. I have closed everything, looked at activity monitor, quit things that I thought might be causing it with no help. Note with the 'thump' there is an ever so slight increase in 1 of the cpu monitors.
Anyway, tonight I just decided to dig more in to it. Because I have 4 drives I decided to at least dis-mount 3 of them to try to determine which drive was actually getting accessed. That's when I noticed I had a cf flash card mounted in my card reader. I dismounted that 1st and, well, the drive access stopped! I re-inserted it and it started up again. I inserted a different (SD instead of CF) card and it also started again. I've never noticed this before. What would be monitoring a mounted flash card? Further investigation revealed that it also does it with USB 'thumb' drives and USB 'hard' drives. BTW, I'm on 10.5.7 if that matters. Now that I know WHAT is wearing out my drive seek mechanism, I can stop it by ejecting any removable media!
View 3 Replies
View Related
Jan 9, 2010
My external HD crashed, with my complete iTunes library on it . I needed CPR. Then I thought: no problems, I have my trusty backup. So I whipped out my other HD with a 30Go .sparseimage on it. I use CCC to do my incremental backups of my library, un-encrypted (i.e. I do not encrypt it). I mount it... and what do I get? The right files, except 300Mb instead of 30Gb! I tried to restore via Disk Utility, with the same result: a 300 Mb file...
Here's some info/weirdness that might help:
- I'm on OS X 10.4 Tiger
- I verified the disk image with Disk Utility - all OK
- I copied the image (the whole 30Gb of it) on a fresh HD, and mounted it. The root folder on the mounted image resides in /private/temp/ccc_dmg_mount.e7h4Mt. Is that normal?
- If I look at the image info (via apple-I or Disk Utility) it gives me a total capacity of 268 GB, which is the size of the HD it resides on! Is that normal?
View 1 Replies
View Related
Jun 26, 2014
in my office I've a network hard drive mounted volume on /Volumes/guest-share, when I try to open directory I get an error:
"The folder can't be opened because you don't have permission to see its contents"
imac:/ roccoverrastro$ ls -AOel /Volumes/
total 56
-rw-r--r--@ 1 roccoverrastro admin - 6148 26 Giu 00:33 .DS_Store
[Code] .....
View 3 Replies
View Related
Aug 10, 2008
Recently I haven't been able to backup. Why this is? Not too sure. I don't remember changing any settings or anything recently but within the last 2 weeks or so I haven't been able to backup at all. When I start backing up it says "preparing backup" then an error message pops up that says "The backup disk image could not be mounted".
View 24 Replies
View Related
